Fix duplicate drive display in mergerfs pools

- Restructure storage rendering logic to prevent drive duplication - Use specific mergerfs check instead of generic multi-drive condition - Ensure drives only appear once under organized data/parity sections
Fix mergerfs drive metric parsing for proper pool consolidation
2025-11-23 17:46:09 +01:00 · 2025-11-23 17:40:12 +01:00 · 2025-11-23 17:35:23 +01:00 · 2025-11-23 17:27:45 +01:00 · 2025-11-23 17:19:15 +01:00 · 2025-11-23 16:47:20 +01:00
14 changed files with 2897 additions and 813 deletions
--- a/CLAUDE.md
+++ b/CLAUDE.md
@@ -144,6 +144,130 @@ nix-build --no-out-link -E 'with import <nixpkgs> {}; fetchurl {
 - **Workspace builds**: `nix-shell -p openssl pkg-config --run "cargo build --workspace"`
 - **Clean compilation**: Remove `target/` between major changes

+## Enhanced Storage Pool Visualization
+
+### Auto-Discovery Architecture
+
+The dashboard uses automatic storage discovery to eliminate manual configuration complexity while providing intelligent storage pool grouping.
+
+### Discovery Process
+
+**At Agent Startup:**
+1. Parse `/proc/mounts` to identify all mounted filesystems
+2. Detect MergerFS pools by analyzing `fuse.mergerfs` mount sources
+3. Identify member disks and potential parity relationships via heuristics
+4. Store discovered storage topology for continuous monitoring
+5. Generate pool-aware metrics with hierarchical relationships
+
+**Continuous Monitoring:**
+- Use stored discovery data for efficient metric collection
+- Monitor individual drives for SMART data, temperature, wear
+- Calculate pool-level health based on member drive status
+- Generate enhanced metrics for dashboard visualization
+
+### Supported Storage Types
+
+**Single Disks:**
+- ext4, xfs, btrfs mounted directly
+- Individual drive monitoring with SMART data
+- Traditional single-disk display for root, boot, etc.
+
+**MergerFS Pools:**
+- Auto-detect from `/proc/mounts` fuse.mergerfs entries
+- Parse source paths to identify member disks (e.g., "/mnt/disk1:/mnt/disk2")
+- Heuristic parity disk detection (sequential device names, "parity" in path)
+- Pool health calculation (healthy/degraded/critical)
+- Hierarchical tree display with data/parity disk grouping
+
+**Future Extensions Ready:**
+- RAID arrays via `/proc/mdstat` parsing
+- ZFS pools via `zpool status` integration
+- LVM logical volumes via `lvs` discovery
+
+### Configuration
+
+```toml
+[collectors.disk]
+enabled = true
+auto_discover = true  # Default: true
+# Optional exclusions for special filesystems
+exclude_mount_points = ["/tmp", "/proc", "/sys", "/dev"]
+exclude_fs_types = ["tmpfs", "devtmpfs", "sysfs", "proc"]
+```
+
+### Display Format
+
+```
+Storage:
+● /srv/media (mergerfs (2+1)):
+  ├─ Pool Status: ● Healthy (3 drives)
+  ├─ Total: ● 63% 2355.2GB/3686.4GB
+  ├─ Data Disks:
+  │  ├─ ● sdb T: 24°C
+  │  └─ ● sdd T: 27°C
+  └─ Parity: ● sdc T: 24°C
+● /:
+  ├─ ● nvme0n1 W: 13%
+  └─ ● 7% 14.5GB/218.5GB
+```
+
+### Implementation Benefits
+
+- **Zero Configuration**: No manual pool definitions required
+- **Always Accurate**: Reflects actual system state automatically
+- **Scales Automatically**: Handles any number of pools without config changes
+- **Backwards Compatible**: Single disks continue working unchanged
+- **Future Ready**: Easy extension for additional storage technologies
+
+### Current Status (v0.1.100)
+
+**✅ Completed:**
+- Auto-discovery system implemented and deployed
+- `/proc/mounts` parsing with smart heuristics for parity detection
+- Storage topology stored at agent startup for efficient monitoring
+- Universal zero-configuration for all hosts (cmbox, steambox, simonbox, srv01, srv02, srv03)
+- Enhanced pool health calculation (healthy/degraded/critical)
+- Hierarchical tree visualization with data/parity disk separation
+
+**🔄 In Progress - Complete Disk Collector Rewrite:**
+
+The current disk collector has grown complex with mixed legacy/auto-discovery approaches. Planning complete rewrite with clean, simple workflow supporting both physical drives and mergerfs pools.
+
+**New Clean Architecture:**
+
+**Discovery Workflow:**
+1. **`lsblk`** to detect all mount points and backing devices
+2. **`df`** to get filesystem usage for each mount point
+3. **Group by physical drive** (nvme0n1, sda, etc.)
+4. **Parse `/proc/mounts`** for mergerfs pools
+5. **Generate unified metrics** for both storage types
+
+**Physical Drive Display:**
+```
+● nvme0n1:
+  ├─ ● Drive: T: 35°C W: 1%
+  ├─ ● Total: 23% 218.0GB/928.2GB
+  ├─ ● /boot: 11% 0.1GB/1.0GB
+  └─ ● /: 23% 214.9GB/928.2GB
+```
+
+**MergerFS Pool Display:**
+```
+● /srv/media (mergerfs):
+  ├─ ● Pool: 63% 2355.2GB/3686.4GB
+  ├─ Data Disks:
+  │  ├─ ● sdb T: 24°C
+  │  └─ ● sdd T: 27°C  
+  └─ ● sdc T: 24°C (parity)
+```
+
+**Implementation Benefits:**
+- **Pure auto-discovery**: No configuration needed
+- **Clean code paths**: Single workflow for all storage types
+- **Consistent display**: Status icons on every line, no redundant text
+- **Simple pipeline**: lsblk → df → group → metrics
+- **Support for both**: Physical drives and mergerfs pools
+
 ## Important Communication Guidelines

 Keep responses concise and focused. Avoid extensive implementation summaries unless requested.
--- a/Cargo.lock
+++ b/Cargo.lock
@@ -17,9 +17,9 @@ dependencies = [

 [[package]]
 name = "aho-corasick"
-version = "1.1.3"
+version = "1.1.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "8e60d3430d3a69478ad0993f19238d2df97c507009a52b3c10addcd7f6bcb916"
+checksum = "ddd31a130427c27518df266943a5308ed92d4b226cc639f5a8f1002816174301"
 dependencies = [
 "memchr",
 ]
@@ -71,22 +71,22 @@ dependencies = [

 [[package]]
 name = "anstyle-query"
-version = "1.1.4"
+version = "1.1.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9e231f6134f61b71076a3eab506c379d4f36122f2af15a9ff04415ea4c3339e2"
+checksum = "40c48f72fd53cd289104fc64099abca73db4166ad86ea0b4341abe65af83dadc"
 dependencies = [
- "windows-sys 0.60.2",
+ "windows-sys 0.61.2",
 ]

 [[package]]
 name = "anstyle-wincon"
-version = "3.0.10"
+version = "3.0.11"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3e0633414522a32ffaac8ac6cc8f748e090c5717661fddeea04219e2344f5f2a"
+checksum = "291e6a250ff86cd4a820112fb8898808a366d8f9f58ce16d1f538353ad55747d"
 dependencies = [
 "anstyle",
 "once_cell_polyfill",
- "windows-sys 0.60.2",
+ "windows-sys 0.61.2",
 ]

 [[package]]
@@ -95,6 +95,15 @@ version = "1.0.100"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "a23eb6b1614318a8071c9b2521f36b424b2c83db5eb3a0fead4a6c0809af6e61"

+[[package]]
+name = "ar_archive_writer"
+version = "0.2.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f0c269894b6fe5e9d7ada0cf69b5bf847ff35bc25fc271f08e1d080fce80339a"
+dependencies = [
+ "object",
+]
+
 [[package]]
 name = "async-trait"
 version = "0.1.89"
@@ -144,9 +153,9 @@ checksum = "46c5e41b57b8bba42a04676d81cb89e9ee8e859a1a66f80a5a72e1cb76b34d43"

 [[package]]
 name = "bytes"
-version = "1.10.1"
+version = "1.11.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d71b6127be86fdcfddb610f7182ac57211d4b18a3e9c82eb2d17662f2227ad6a"
+checksum = "b35204fbdc0b3f4446b89fc1ac2cf84a8a68971995d0bf2e925ec7cd960f9cb3"

 [[package]]
 name = "cassowary"
@@ -156,9 +165,9 @@ checksum = "df8670b8c7b9dae1793364eafadf7239c40d669904660c5960d74cfd80b46a53"

 [[package]]
 name = "cc"
-version = "1.2.41"
+version = "1.2.46"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ac9fe6cdbb24b6ade63616c0a0688e45bb56732262c158df3c0c4bea4ca47cb7"
+checksum = "b97463e1064cb1b1c1384ad0a0b9c8abd0988e2a91f52606c80ef14aadb63e36"
 dependencies = [
 "find-msvc-tools",
 "jobserver",
@@ -230,9 +239,9 @@ dependencies = [

 [[package]]
 name = "clap"
-version = "4.5.49"
+version = "4.5.52"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f4512b90fa68d3a9932cea5184017c5d200f5921df706d45e853537dea51508f"
+checksum = "aa8120877db0e5c011242f96806ce3c94e0737ab8108532a76a3300a01db2ab8"
 dependencies = [
 "clap_builder",
 "clap_derive",
@@ -240,9 +249,9 @@ dependencies = [

 [[package]]
 name = "clap_builder"
-version = "4.5.49"
+version = "4.5.52"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0025e98baa12e766c67ba13ff4695a887a1eba19569aad00a472546795bd6730"
+checksum = "02576b399397b659c26064fbc92a75fede9d18ffd5f80ca1cd74ddab167016e1"
 dependencies = [
 "anstream",
 "anstyle",
@@ -270,7 +279,7 @@ checksum = "a1d728cc89cf3aee9ff92b05e62b19ee65a02b5702cff7d5a377e32c6ae29d8d"

 [[package]]
 name = "cm-dashboard"
-version = "0.1.81"
+version = "0.1.123"
 dependencies = [
 "anyhow",
 "chrono",
@@ -292,7 +301,7 @@ dependencies = [

 [[package]]
 name = "cm-dashboard-agent"
-version = "0.1.81"
+version = "0.1.123"
 dependencies = [
 "anyhow",
 "async-trait",
@@ -315,7 +324,7 @@ dependencies = [

 [[package]]
 name = "cm-dashboard-shared"
-version = "0.1.81"
+version = "0.1.123"
 dependencies = [
 "chrono",
 "serde",
@@ -503,9 +512,9 @@ checksum = "37909eebbb50d72f9059c3b6d82c0463f2ff062c9e95845c43a6c9c0355411be"

 [[package]]
 name = "find-msvc-tools"
-version = "0.1.4"
+version = "0.1.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "52051878f80a721bb68ebfbc930e07b65ba72f2da88968ea5c06fd6ca3d3a127"
+checksum = "3a3076410a55c90011c298b04d0cfa770b00fa04e1e3c97d3f6c9de105a03844"

 [[package]]
 name = "fnv"
@@ -768,9 +777,9 @@ dependencies = [

 [[package]]
 name = "icu_collections"
-version = "2.0.0"
+version = "2.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "200072f5d0e3614556f94a9930d5dc3e0662a652823904c3a75dc3b0af7fee47"
+checksum = "4c6b649701667bbe825c3b7e6388cb521c23d88644678e83c0c4d0a621a34b43"
 dependencies = [
 "displaydoc",
 "potential_utf",
@@ -781,9 +790,9 @@ dependencies = [

 [[package]]
 name = "icu_locale_core"
-version = "2.0.0"
+version = "2.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0cde2700ccaed3872079a65fb1a78f6c0a36c91570f28755dda67bc8f7d9f00a"
+checksum = "edba7861004dd3714265b4db54a3c390e880ab658fec5f7db895fae2046b5bb6"
 dependencies = [
 "displaydoc",
 "litemap",
@@ -794,11 +803,10 @@ dependencies = [

 [[package]]
 name = "icu_normalizer"
-version = "2.0.0"
+version = "2.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "436880e8e18df4d7bbc06d58432329d6458cc84531f7ac5f024e93deadb37979"
+checksum = "5f6c8828b67bf8908d82127b2054ea1b4427ff0230ee9141c54251934ab1b599"
 dependencies = [
- "displaydoc",
 "icu_collections",
 "icu_normalizer_data",
 "icu_properties",
@@ -809,42 +817,38 @@ dependencies = [

 [[package]]
 name = "icu_normalizer_data"
-version = "2.0.0"
+version = "2.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "00210d6893afc98edb752b664b8890f0ef174c8adbb8d0be9710fa66fbbf72d3"
+checksum = "7aedcccd01fc5fe81e6b489c15b247b8b0690feb23304303a9e560f37efc560a"

 [[package]]
 name = "icu_properties"
-version = "2.0.1"
+version = "2.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "016c619c1eeb94efb86809b015c58f479963de65bdb6253345c1a1276f22e32b"
+checksum = "e93fcd3157766c0c8da2f8cff6ce651a31f0810eaa1c51ec363ef790bbb5fb99"
 dependencies = [
- "displaydoc",
 "icu_collections",
 "icu_locale_core",
 "icu_properties_data",
 "icu_provider",
- "potential_utf",
 "zerotrie",
 "zerovec",
 ]

 [[package]]
 name = "icu_properties_data"
-version = "2.0.1"
+version = "2.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "298459143998310acd25ffe6810ed544932242d3f07083eee1084d83a71bd632"
+checksum = "02845b3647bb045f1100ecd6480ff52f34c35f82d9880e029d329c21d1054899"

 [[package]]
 name = "icu_provider"
-version = "2.0.0"
+version = "2.1.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "03c80da27b5f4187909049ee2d72f276f0d9f99a42c306bd0131ecfe04d8e5af"
+checksum = "85962cf0ce02e1e0a629cc34e7ca3e373ce20dda4c4d7294bbd0bf1fdb59e614"
 dependencies = [
 "displaydoc",
 "icu_locale_core",
- "stable_deref_trait",
- "tinystr",
 "writeable",
 "yoke",
 "zerofrom",
@@ -885,9 +889,12 @@ dependencies = [

 [[package]]
 name = "indoc"
-version = "2.0.6"
+version = "2.0.7"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f4c7245a08504955605670dbf141fceab975f15ca21570696aebe9d2e71576bd"
+checksum = "79cf5c93f93228cf8efb3ba362535fb11199ac548a09ce117c9b1adc3030d706"
+dependencies = [
+ "rustversion",
+]

 [[package]]
 name = "ipnet"
@@ -897,9 +904,9 @@ checksum = "469fb0b9cefa57e3ef31275ee7cacb78f2fdca44e4765491884a2b119d4eb130"

 [[package]]
 name = "is_terminal_polyfill"
-version = "1.70.1"
+version = "1.70.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7943c866cc5cd64cbc25b2e01621d07fa8eb2a1a23160ee81ce38704e97b8ecf"
+checksum = "a6cb138bb79a146c1bd460005623e142ef0181e3d0219cb493e02f7d08a35695"

 [[package]]
 name = "itertools"
@@ -928,9 +935,9 @@ dependencies = [

 [[package]]
 name = "js-sys"
-version = "0.3.81"
+version = "0.3.82"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ec48937a97411dcb524a265206ccd4c90bb711fca92b2792c407f268825b9305"
+checksum = "b011eec8cc36da2aab2d5cff675ec18454fad408585853910a202391cf9f8e65"
 dependencies = [
 "once_cell",
 "wasm-bindgen",
@@ -988,9 +995,9 @@ checksum = "df1d3c3b53da64cf5760482273a98e575c651a67eec7f77df96b5b642de8f039"

 [[package]]
 name = "litemap"
-version = "0.8.0"
+version = "0.8.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "241eaef5fd12c88705a01fc1066c48c4b36e0dd4377dcdc7ec3942cea7a69956"
+checksum = "6373607a59f0be73a39b6fe456b8192fcc3585f602af20751600e974dd455e77"

 [[package]]
 name = "lock_api"
@@ -1104,6 +1111,15 @@ dependencies = [
 "autocfg",
 ]

+[[package]]
+name = "object"
+version = "0.32.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "a6a622008b6e321afc04970976f62ee297fdbaa6f95318ca343e3eebb9648441"
+dependencies = [
+ "memchr",
+]
+
 [[package]]
 name = "once_cell"
 version = "1.21.3"
@@ -1112,15 +1128,15 @@ checksum = "42f5e15c9953c5e4ccceeb2e7382a716482c34515315f7b03532b8b4e8393d2d"

 [[package]]
 name = "once_cell_polyfill"
-version = "1.70.1"
+version = "1.70.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "a4895175b425cb1f87721b59f0f286c2092bd4af812243672510e1ac53e2e0ad"
+checksum = "384b8ab6d37215f3c5301a95a4accb5d64aa607f1fcb26a11b5303878451b4fe"

 [[package]]
 name = "openssl"
-version = "0.10.74"
+version = "0.10.75"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "24ad14dd45412269e1a30f52ad8f0664f0f4f4a89ee8fe28c3b3527021ebb654"
+checksum = "08838db121398ad17ab8531ce9de97b244589089e290a384c900cb9ff7434328"
 dependencies = [
 "bitflags 2.10.0",
 "cfg-if",
@@ -1150,9 +1166,9 @@ checksum = "d05e27ee213611ffe7d6348b942e8f942b37114c00cc03cec254295a4a17852e"

 [[package]]
 name = "openssl-sys"
-version = "0.9.110"
+version = "0.9.111"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0a9f0075ba3c21b09f8e8b2026584b1d18d49388648f2fbbf3c97ea8deced8e2"
+checksum = "82cab2d520aa75e3c58898289429321eb788c3106963d0dc886ec7a5f4adc321"
 dependencies = [
 "cc",
 "libc",
@@ -1262,36 +1278,37 @@ checksum = "7edddbd0b52d732b21ad9a5fab5c704c14cd949e5e9a1ec5929a24fded1b904c"

 [[package]]
 name = "potential_utf"
-version = "0.1.3"
+version = "0.1.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "84df19adbe5b5a0782edcab45899906947ab039ccf4573713735ee7de1e6b08a"
+checksum = "b73949432f5e2a09657003c25bca5e19a0e9c84f8058ca374f49e0ebe605af77"
 dependencies = [
 "zerovec",
 ]

 [[package]]
 name = "proc-macro2"
-version = "1.0.101"
+version = "1.0.103"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "89ae43fd86e4158d6db51ad8e2b80f313af9cc74f5c0e03ccb87de09998732de"
+checksum = "5ee95bc4ef87b8d5ba32e8b7714ccc834865276eab0aed5c9958d00ec45f49e8"
 dependencies = [
 "unicode-ident",
 ]

 [[package]]
 name = "psm"
-version = "0.1.27"
+version = "0.1.28"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e66fcd288453b748497d8fb18bccc83a16b0518e3906d4b8df0a8d42d93dbb1c"
+checksum = "d11f2fedc3b7dafdc2851bc52f277377c5473d378859be234bc7ebb593144d01"
 dependencies = [
+ "ar_archive_writer",
 "cc",
 ]

 [[package]]
 name = "quote"
-version = "1.0.41"
+version = "1.0.42"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ce25767e7b499d1b604768e7cde645d14cc8584231ea6b295e9c9eb22c02e1d1"
+checksum = "a338cc41d27e6cc6dce6cefc13a0729dfbb81c262b1f519331575dd80ef3067f"
 dependencies = [
 "proc-macro2",
 ]
@@ -1611,9 +1628,9 @@ dependencies = [

 [[package]]
 name = "signal-hook-mio"
-version = "0.2.4"
+version = "0.2.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "34db1a06d485c9142248b7a054f034b349b212551f3dfd19c94d45a754a217cd"
+checksum = "b75a19a7a740b25bc7944bdee6172368f988763b744e3d4dfe753f6b4ece40cc"
 dependencies = [
 "libc",
 "mio 0.8.11",
@@ -1716,9 +1733,9 @@ dependencies = [

 [[package]]
 name = "syn"
-version = "2.0.107"
+version = "2.0.110"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "2a26dbd934e5451d21ef060c018dae56fc073894c5a7896f882928a76e6d081b"
+checksum = "a99801b5bd34ede4cf3fc688c5919368fea4e4814a4664359503e6015b280aea"
 dependencies = [
 "proc-macro2",
 "quote",
@@ -1826,9 +1843,9 @@ dependencies = [

 [[package]]
 name = "tinystr"
-version = "0.8.1"
+version = "0.8.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5d4f6d1145dcb577acf783d4e601bc1d76a13337bb54e6233add580b07344c8b"
+checksum = "42d3e9c45c09de15d06dd8acf5f4e0e399e85927b7f00711024eb7ae10fa4869"
 dependencies = [
 "displaydoc",
 "zerovec",
@@ -1874,9 +1891,9 @@ dependencies = [

 [[package]]
 name = "tokio-util"
-version = "0.7.16"
+version = "0.7.17"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "14307c986784f72ef81c89db7d9e28d6ac26d16213b109ea501696195e6e3ce5"
+checksum = "2efa149fe76073d6e8fd97ef4f4eca7b67f599660115591483572e406e165594"
 dependencies = [
 "bytes",
 "futures-core",
@@ -2001,9 +2018,9 @@ checksum = "e421abadd41a4225275504ea4d6566923418b7f05506fbc9c0fe86ba7396114b"

 [[package]]
 name = "unicode-ident"
-version = "1.0.19"
+version = "1.0.22"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f63a545481291138910575129486daeaf8ac54aee4387fe7906919f7830c7d9d"
+checksum = "9312f7c4f6ff9069b165498234ce8be658059c6728633667c526e27dc2cf1df5"

 [[package]]
 name = "unicode-segmentation"
@@ -2055,9 +2072,9 @@ checksum = "accd4ea62f7bb7a82fe23066fb0957d48ef677f6eeb8215f372f52e48bb32426"

 [[package]]
 name = "version-compare"
-version = "0.2.0"
+version = "0.2.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "852e951cb7832cb45cb1169900d19760cfa39b82bc0ea9c0e5a14ae88411c98b"
+checksum = "03c2856837ef78f57382f06b2b8563a2f512f7185d732608fd9176cb3b8edf0e"

 [[package]]
 name = "version_check"
@@ -2107,9 +2124,9 @@ dependencies = [

 [[package]]
 name = "wasm-bindgen"
-version = "0.2.104"
+version = "0.2.105"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "c1da10c01ae9f1ae40cbfac0bac3b1e724b320abfcf52229f80b547c0d250e2d"
+checksum = "da95793dfc411fbbd93f5be7715b0578ec61fe87cb1a42b12eb625caa5c5ea60"
 dependencies = [
 "cfg-if",
 "once_cell",
@@ -2118,25 +2135,11 @@ dependencies = [
 "wasm-bindgen-shared",
 ]

-[[package]]
-name = "wasm-bindgen-backend"
-version = "0.2.104"
-source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "671c9a5a66f49d8a47345ab942e2cb93c7d1d0339065d4f8139c486121b43b19"
-dependencies = [
- "bumpalo",
- "log",
- "proc-macro2",
- "quote",
- "syn",
- "wasm-bindgen-shared",
-]
-
 [[package]]
 name = "wasm-bindgen-futures"
-version = "0.4.54"
+version = "0.4.55"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7e038d41e478cc73bae0ff9b36c60cff1c98b8f38f8d7e8061e79ee63608ac5c"
+checksum = "551f88106c6d5e7ccc7cd9a16f312dd3b5d36ea8b4954304657d5dfba115d4a0"
 dependencies = [
 "cfg-if",
 "js-sys",
@@ -2147,9 +2150,9 @@ dependencies = [

 [[package]]
 name = "wasm-bindgen-macro"
-version = "0.2.104"
+version = "0.2.105"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "7ca60477e4c59f5f2986c50191cd972e3a50d8a95603bc9434501cf156a9a119"
+checksum = "04264334509e04a7bf8690f2384ef5265f05143a4bff3889ab7a3269adab59c2"
 dependencies = [
 "quote",
 "wasm-bindgen-macro-support",
@@ -2157,31 +2160,31 @@ dependencies = [

 [[package]]
 name = "wasm-bindgen-macro-support"
-version = "0.2.104"
+version = "0.2.105"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9f07d2f20d4da7b26400c9f4a0511e6e0345b040694e8a75bd41d578fa4421d7"
+checksum = "420bc339d9f322e562942d52e115d57e950d12d88983a14c79b86859ee6c7ebc"
 dependencies = [
+ "bumpalo",
 "proc-macro2",
 "quote",
 "syn",
- "wasm-bindgen-backend",
 "wasm-bindgen-shared",
 ]

 [[package]]
 name = "wasm-bindgen-shared"
-version = "0.2.104"
+version = "0.2.105"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "bad67dc8b2a1a6e5448428adec4c3e84c43e561d8c9ee8a9e5aabeb193ec41d1"
+checksum = "76f218a38c84bcb33c25ec7059b07847d465ce0e0a76b995e134a45adcb6af76"
 dependencies = [
 "unicode-ident",
 ]

 [[package]]
 name = "web-sys"
-version = "0.3.81"
+version = "0.3.82"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "9367c417a924a74cae129e6a2ae3b47fabb1f8995595ab474029da749a8be120"
+checksum = "3a1f95c0d03a47f4ae1f7a64643a6bb97465d9b740f0fa8f90ea33915c99a9a1"
 dependencies = [
 "js-sys",
 "wasm-bindgen",
@@ -2535,17 +2538,16 @@ checksum = "f17a85883d4e6d00e8a97c586de764dabcc06133f7f1d55dce5cdc070ad7fe59"

 [[package]]
 name = "writeable"
-version = "0.6.1"
+version = "0.6.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "ea2f10b9bb0928dfb1b42b65e1f9e36f7f54dbdf08457afefb38afcdec4fa2bb"
+checksum = "9edde0db4769d2dc68579893f2306b26c6ecfbe0ef499b013d731b7b9247e0b9"

 [[package]]
 name = "yoke"
-version = "0.8.0"
+version = "0.8.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5f41bb01b8226ef4bfd589436a297c53d118f65921786300e427be8d487695cc"
+checksum = "72d6e5c6afb84d73944e5cedb052c4680d5657337201555f9f2a16b7406d4954"
 dependencies = [
- "serde",
 "stable_deref_trait",
 "yoke-derive",
 "zerofrom",
@@ -2553,9 +2555,9 @@ dependencies = [

 [[package]]
 name = "yoke-derive"
-version = "0.8.0"
+version = "0.8.1"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "38da3c9736e16c5d3c8c597a9aaa5d1fa565d0532ae05e27c24aa62fb32c0ab6"
+checksum = "b659052874eb698efe5b9e8cf382204678a0086ebf46982b79d6ca3182927e5d"
 dependencies = [
 "proc-macro2",
 "quote",
@@ -2616,9 +2618,9 @@ dependencies = [

 [[package]]
 name = "zerotrie"
-version = "0.2.2"
+version = "0.2.3"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "36f0bbd478583f79edad978b407914f61b2972f5af6fa089686016be8f9af595"
+checksum = "2a59c17a5562d507e4b54960e8569ebee33bee890c70aa3fe7b97e85a9fd7851"
 dependencies = [
 "displaydoc",
 "yoke",
@@ -2627,9 +2629,9 @@ dependencies = [

 [[package]]
 name = "zerovec"
-version = "0.11.4"
+version = "0.11.5"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "e7aa2bd55086f1ab526693ecbe444205da57e25f4489879da80635a46d90e73b"
+checksum = "6c28719294829477f525be0186d13efa9a3c602f7ec202ca9e353d310fb9a002"
 dependencies = [
 "yoke",
 "zerofrom",
@@ -2638,9 +2640,9 @@ dependencies = [

 [[package]]
 name = "zerovec-derive"
-version = "0.11.1"
+version = "0.11.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "5b96237efa0c878c64bd89c436f661be4e46b2f3eff1ebb976f7ef2321d2f58f"
+checksum = "eadce39539ca5cb3985590102671f2567e659fca9666581ad3411d59207951f3"
 dependencies = [
 "proc-macro2",
 "quote",
--- a/agent/Cargo.toml
+++ b/agent/Cargo.toml
@@ -1,6 +1,6 @@
 [package]
 name = "cm-dashboard-agent"
-version = "0.1.82"
+version = "0.1.123"
 edition = "2021"

 [dependencies]
--- a/agent/src/collectors/backup.rs
+++ b/agent/src/collectors/backup.rs
@@ -25,6 +25,25 @@ impl BackupCollector {
    }

    async fn read_backup_status(&self) -> Result<Option<BackupStatusToml>, CollectorError> {
+        // Check if we're in maintenance mode
+        if std::fs::metadata("/tmp/cm-maintenance").is_ok() {
+            // Return special maintenance mode status
+            let maintenance_status = BackupStatusToml {
+                backup_name: "maintenance".to_string(),
+                start_time: chrono::Utc::now().format("%Y-%m-%d %H:%M:%S UTC").to_string(),
+                current_time: chrono::Utc::now().format("%Y-%m-%d %H:%M:%S UTC").to_string(),
+                duration_seconds: 0,
+                status: "pending".to_string(),
+                last_updated: chrono::Utc::now().format("%Y-%m-%d %H:%M:%S UTC").to_string(),
+                disk_space: None,
+                disk_product_name: None,
+                disk_serial_number: None,
+                disk_wear_percent: None,
+                services: HashMap::new(),
+            };
+            return Ok(Some(maintenance_status));
+        }
+
        // Check if backup status file exists
        if !std::path::Path::new(&self.backup_status_file).exists() {
            return Ok(None); // File doesn't exist, but this is not an error
@@ -79,7 +98,9 @@ impl BackupCollector {
                }
            }
            "failed" => Status::Critical,
+            "warning" => Status::Warning, // Backup completed with warnings
            "running" => Status::Ok, // Currently running is OK
+            "pending" => Status::Pending, // Maintenance mode or backup starting
            _ => Status::Unknown,
        }
    }
@@ -379,6 +400,25 @@ impl Collector for BackupCollector {
            });
        }

+        if let Some(wear_percent) = backup_status.disk_wear_percent {
+            let wear_status = if wear_percent >= 90.0 {
+                Status::Critical
+            } else if wear_percent >= 75.0 {
+                Status::Warning
+            } else {
+                Status::Ok
+            };
+            
+            metrics.push(Metric {
+                name: "backup_disk_wear_percent".to_string(),
+                value: MetricValue::Float(wear_percent),
+                status: wear_status,
+                timestamp,
+                description: Some("Backup disk wear percentage from SMART data".to_string()),
+                unit: Some("percent".to_string()),
+            });
+        }
+
        // Count services by status
        let mut status_counts = HashMap::new();
        for service in backup_status.services.values() {
@@ -412,6 +452,7 @@ pub struct BackupStatusToml {
    pub disk_space: Option<DiskSpace>,
    pub disk_product_name: Option<String>,
    pub disk_serial_number: Option<String>,
+    pub disk_wear_percent: Option<f32>,
    pub services: HashMap<String, ServiceStatus>,
 }

--- a/agent/src/collectors/disk.rs
+++ b/agent/src/collectors/disk.rs
@@ -5,353 +5,159 @@ use cm_dashboard_shared::{Metric, MetricValue, Status, StatusTracker, Hysteresis
 use crate::config::DiskConfig;
 use std::process::Command;
 use std::time::Instant;
+use std::collections::HashMap;
 use tracing::debug;

 use super::{Collector, CollectorError};

-/// Information about a storage pool (mount point with underlying drives)
-#[derive(Debug, Clone)]
-struct StoragePool {
-    name: String,            // e.g., "steampool", "root"
-    mount_point: String,     // e.g., "/mnt/steampool", "/"
-    filesystem: String,      // e.g., "mergerfs", "ext4", "zfs", "btrfs"
-    storage_type: String,    // e.g., "mergerfs", "single", "raid", "zfs"
-    size: String,            // e.g., "2.5TB"
-    used: String,            // e.g., "2.1TB"
-    available: String,       // e.g., "400GB"
-    usage_percent: f32,      // e.g., 85.0
-    underlying_drives: Vec<DriveInfo>, // Individual physical drives
-}
-
-/// Information about an individual physical drive
-#[derive(Debug, Clone)]
-struct DriveInfo {
-    device: String,          // e.g., "sda", "nvme0n1"
-    health_status: String,   // e.g., "PASSED", "FAILED"
-    temperature: Option<f32>, // e.g., 45.0°C
-    wear_level: Option<f32>, // e.g., 12.0% (for SSDs)
-}
-
-/// Disk usage collector for monitoring filesystem sizes
+/// Storage collector with clean architecture
 pub struct DiskCollector {
    config: DiskConfig,
    temperature_thresholds: HysteresisThresholds,
-    detected_devices: std::collections::HashMap<String, Vec<String>>, // mount_point -> devices
+}
+
+/// A physical drive with its filesystems
+#[derive(Debug, Clone)]
+struct PhysicalDrive {
+    device: String,                    // e.g., "nvme0n1", "sda"
+    filesystems: Vec<Filesystem>,      // mounted filesystems on this drive
+    temperature: Option<f32>,          // drive temperature
+    wear_level: Option<f32>,          // SSD wear level
+    health_status: String,            // SMART health
+}
+
+/// A mergerfs pool
+#[derive(Debug, Clone)]
+struct MergerfsPool {
+    mount_point: String,              // e.g., "/srv/media"
+    total_bytes: u64,                // pool total capacity
+    used_bytes: u64,                 // pool used space
+    data_drives: Vec<DriveInfo>,     // data member drives
+    parity_drives: Vec<DriveInfo>,   // parity drives
+}
+
+/// Individual filesystem on a drive
+#[derive(Debug, Clone)]
+struct Filesystem {
+    mount_point: String,              // e.g., "/", "/boot"
+    total_bytes: u64,                // filesystem capacity
+    used_bytes: u64,                 // filesystem used space
+}
+
+/// Drive information for pools
+#[derive(Debug, Clone)]
+struct DriveInfo {
+    device: String,                   // e.g., "sdb", "sdc"
+    mount_point: String,             // e.g., "/mnt/disk1"
+    temperature: Option<f32>,        // drive temperature
+    wear_level: Option<f32>,         // SSD wear level  
+    health_status: String,           // SMART health
+}
+
+/// Discovered storage topology
+#[derive(Debug)]
+struct StorageTopology {
+    physical_drives: Vec<PhysicalDrive>,
+    mergerfs_pools: Vec<MergerfsPool>,
 }

 impl DiskCollector {
    pub fn new(config: DiskConfig) -> Self {
-        // Create hysteresis thresholds for disk temperature from config
        let temperature_thresholds = HysteresisThresholds::with_custom_gaps(
            config.temperature_warning_celsius,
-            5.0,  // 5°C gap for recovery
+            5.0,
            config.temperature_critical_celsius,
-            5.0,  // 5°C gap for recovery
+            5.0,
        );
        
-        // Detect devices for all configured filesystems at startup
-        let mut detected_devices = std::collections::HashMap::new();
-        for fs_config in &config.filesystems {
-            if fs_config.monitor {
-                if let Ok(devices) = Self::detect_device_for_mount_point_static(&fs_config.mount_point) {
-                    detected_devices.insert(fs_config.mount_point.clone(), devices);
-                }
-            }
-        }
-        
        Self { 
            config,
            temperature_thresholds,
-            detected_devices,
        }
    }

-    /// Calculate disk temperature status using hysteresis thresholds
-    fn calculate_temperature_status(&self, metric_name: &str, temperature: f32, status_tracker: &mut StatusTracker) -> Status {
-        status_tracker.calculate_with_hysteresis(metric_name, temperature, &self.temperature_thresholds)
-    }
-
-
-    /// Get configured storage pools with individual drive information
-    fn get_configured_storage_pools(&self) -> Result<Vec<StoragePool>> {
-        let mut storage_pools = Vec::new();
-
-        for fs_config in &self.config.filesystems {
-            if !fs_config.monitor {
-                continue;
-            }
-
-            // Get filesystem stats for the mount point
-            match self.get_filesystem_info(&fs_config.mount_point) {
-                Ok((total_bytes, used_bytes)) => {
-                    let available_bytes = total_bytes - used_bytes;
-                    let usage_percent = if total_bytes > 0 {
-                        (used_bytes as f64 / total_bytes as f64) * 100.0
-                    } else {
-                        0.0
-                    };
-
-                    // Convert bytes to human-readable format
-                    let size = self.bytes_to_human_readable(total_bytes);
-                    let used = self.bytes_to_human_readable(used_bytes);
-                    let available = self.bytes_to_human_readable(available_bytes);
-
-                    // Get individual drive information using pre-detected devices
-                    let device_names = self.detected_devices.get(&fs_config.mount_point).cloned().unwrap_or_default();
-                    let underlying_drives = self.get_drive_info_for_devices(&device_names)?;
-
-                    storage_pools.push(StoragePool {
-                        name: fs_config.name.clone(),
-                        mount_point: fs_config.mount_point.clone(),
-                        filesystem: fs_config.fs_type.clone(),
-                        storage_type: fs_config.storage_type.clone(),
-                        size,
-                        used,
-                        available,
-                        usage_percent: usage_percent as f32,
-                        underlying_drives,
-                    });
-
-                    debug!(
-                        "Storage pool '{}' ({}) at {} with {} detected drives",
-                        fs_config.name, fs_config.storage_type, fs_config.mount_point, device_names.len()
-                    );
-                }
-                Err(e) => {
-                    debug!(
-                        "Failed to get filesystem info for storage pool '{}': {}",
-                        fs_config.name, e
-                    );
-                }
-            }
-        }
-
-        Ok(storage_pools)
-    }
-
-    /// Get drive information for a list of device names
-    fn get_drive_info_for_devices(&self, device_names: &[String]) -> Result<Vec<DriveInfo>> {
-        let mut drives = Vec::new();
+    /// Discover all storage using clean workflow: lsblk → df → group
+    fn discover_storage(&self) -> Result<StorageTopology> {
+        debug!("Starting storage discovery");
        
-        for device_name in device_names {
-            let device_path = format!("/dev/{}", device_name);
-            
-            // Get SMART data for this drive
-            let (health_status, temperature, wear_level) = self.get_smart_data(&device_path);
-            
-            drives.push(DriveInfo {
-                device: device_name.clone(),
-                health_status: health_status.clone(),
-                temperature,
-                wear_level,
-            });
-            
-            debug!(
-                "Drive info for {}: health={}, temp={:?}°C, wear={:?}%",
-                device_name, health_status, temperature, wear_level
-            );
-        }
+        // Step 1: Get all mount points and their backing devices using lsblk
+        let mount_devices = self.get_mount_devices()?;
+        debug!("Found {} mount points", mount_devices.len());
        
-        Ok(drives)
+        // Step 2: Get filesystem usage for each mount point using df
+        let filesystem_usage = self.get_filesystem_usage(&mount_devices)?;
+        debug!("Got usage data for {} filesystems", filesystem_usage.len());
+        
+        // Step 3: Detect mergerfs pools from /proc/mounts
+        let mergerfs_pools = self.discover_mergerfs_pools()?;
+        debug!("Found {} mergerfs pools", mergerfs_pools.len());
+        
+        // Step 4: Group regular filesystems by physical drive
+        let physical_drives = self.group_by_physical_drive(&mount_devices, &filesystem_usage, &mergerfs_pools)?;
+        debug!("Grouped into {} physical drives", physical_drives.len());
+        
+        Ok(StorageTopology {
+            physical_drives,
+            mergerfs_pools,
+        })
    }

-    /// Get SMART data for a drive (health, temperature, wear level)
-    fn get_smart_data(&self, device_path: &str) -> (String, Option<f32>, Option<f32>) {
-        // Try to get SMART data using smartctl
-        let output = Command::new("sudo")
-            .arg("smartctl")
-            .arg("-a")
-            .arg(device_path)
-            .output();
-            
-        match output {
-            Ok(result) if result.status.success() => {
-                let stdout = String::from_utf8_lossy(&result.stdout);
-                
-                // Parse health status
-                let health = if stdout.contains("PASSED") {
-                    "PASSED".to_string()
-                } else if stdout.contains("FAILED") {
-                    "FAILED".to_string()
-                } else {
-                    "UNKNOWN".to_string()
-                };
-                
-                // Parse temperature (look for various temperature indicators)
-                let temperature = self.parse_temperature_from_smart(&stdout);
-                
-                // Parse wear level (for SSDs)
-                let wear_level = self.parse_wear_level_from_smart(&stdout);
-                
-                (health, temperature, wear_level)
-            }
-            _ => {
-                debug!("Failed to get SMART data for {}", device_path);
-                ("UNKNOWN".to_string(), None, None)
-            }
-        }
-    }
-
-    /// Parse temperature from SMART output
-    fn parse_temperature_from_smart(&self, smart_output: &str) -> Option<f32> {
-        for line in smart_output.lines() {
-            // Look for temperature in various formats
-            if line.contains("Temperature_Celsius") || line.contains("Temperature") {
-                let parts: Vec<&str> = line.split_whitespace().collect();
-                if parts.len() >= 10 {
-                    if let Ok(temp) = parts[9].parse::<f32>() {
-                        return Some(temp);
-                    }
-                }
-            }
-            // NVMe drives might show temperature differently
-            if line.contains("temperature:") {
-                if let Some(temp_part) = line.split("temperature:").nth(1) {
-                    if let Some(temp_str) = temp_part.split_whitespace().next() {
-                        if let Ok(temp) = temp_str.parse::<f32>() {
-                            return Some(temp);
-                        }
-                    }
-                }
-            }
-        }
-        None
-    }
-
-    /// Parse wear level from SMART output (SSD wear leveling)
-    /// Supports both NVMe and SATA SSD wear indicators
-    fn parse_wear_level_from_smart(&self, smart_output: &str) -> Option<f32> {
-        for line in smart_output.lines() {
-            let line = line.trim();
-            
-            // NVMe drives - direct percentage used
-            if line.contains("Percentage Used:") {
-                if let Some(wear_part) = line.split("Percentage Used:").nth(1) {
-                    if let Some(wear_str) = wear_part.split('%').next() {
-                        if let Ok(wear) = wear_str.trim().parse::<f32>() {
-                            return Some(wear);
-                        }
-                    }
-                }
-            }
-            
-            // SATA SSD attributes - parse SMART table format
-            // Format: ID ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
-            let parts: Vec<&str> = line.split_whitespace().collect();
-            if parts.len() >= 10 {
-                // SSD Life Left / Percent Lifetime Remaining (higher = less wear)
-                if line.contains("SSD_Life_Left") || line.contains("Percent_Lifetime_Remain") {
-                    if let Ok(remaining) = parts[3].parse::<f32>() { // VALUE column
-                        return Some(100.0 - remaining); // Convert remaining to used
-                    }
-                }
-                
-                // Media Wearout Indicator (lower = more wear, normalize to 0-100)
-                if line.contains("Media_Wearout_Indicator") {
-                    if let Ok(remaining) = parts[3].parse::<f32>() { // VALUE column
-                        return Some(100.0 - remaining); // Convert remaining to used
-                    }
-                }
-                
-                // Wear Leveling Count (higher = less wear, but varies by manufacturer)
-                if line.contains("Wear_Leveling_Count") {
-                    if let Ok(wear_count) = parts[3].parse::<f32>() { // VALUE column
-                        // Most SSDs: 100 = new, decreases with wear
-                        if wear_count <= 100.0 {
-                            return Some(100.0 - wear_count);
-                        }
-                    }
-                }
-                
-                // Total LBAs Written - calculate against typical endurance if available
-                // This is more complex and manufacturer-specific, so we skip for now
-            }
-        }
-        None
-    }
-
-    /// Convert bytes to human-readable format
-    fn bytes_to_human_readable(&self, bytes: u64) -> String {
-        const UNITS: &[&str] = &["B", "K", "M", "G", "T"];
-        let mut size = bytes as f64;
-        let mut unit_index = 0;
-
-        while size >= 1024.0 && unit_index < UNITS.len() - 1 {
-            size /= 1024.0;
-            unit_index += 1;
-        }
-
-        if unit_index == 0 {
-            format!("{:.0}{}", size, UNITS[unit_index])
-        } else {
-            format!("{:.1}{}", size, UNITS[unit_index])
-        }
-    }
-
-    /// Detect device backing a mount point using lsblk (static version for startup)
-    fn detect_device_for_mount_point_static(mount_point: &str) -> Result<Vec<String>> {
+    /// Use lsblk to get mount points and their backing devices
+    fn get_mount_devices(&self) -> Result<HashMap<String, String>> {
        let output = Command::new("lsblk")
            .args(&["-n", "-o", "NAME,MOUNTPOINT"])
            .output()?;
-        
+            
        if !output.status.success() {
-            return Ok(Vec::new());
+            return Err(anyhow::anyhow!("lsblk command failed"));
        }
        
+        let mut mount_devices = HashMap::new();
        let output_str = String::from_utf8_lossy(&output.stdout);
        
        for line in output_str.lines() {
            let parts: Vec<&str> = line.split_whitespace().collect();
-            if parts.len() >= 2 && parts[1] == mount_point {
-                // Remove tree symbols and extract device name (e.g., "├─nvme0n1p2" -> "nvme0n1p2")
+            if parts.len() >= 2 {
                let device_name = parts[0]
-                    .trim_start_matches('├')
-                    .trim_start_matches('└')
-                    .trim_start_matches('─')
-                    .trim();
+                    .trim_start_matches(&['├', '└', '─', ' '][..]);
+                let mount_point = parts[1];
                
-                // Extract base device name (e.g., "nvme0n1p2" -> "nvme0n1")
-                if let Some(base_device) = Self::extract_base_device(device_name) {
-                    return Ok(vec![base_device]);
+                // Skip unwanted mount points
+                if self.should_skip_mount_point(mount_point) {
+                    continue;
+                }
+                
+                mount_devices.insert(mount_point.to_string(), device_name.to_string());
+            }
+        }
+        
+        Ok(mount_devices)
+    }
+
+    /// Check if we should skip this mount point
+    fn should_skip_mount_point(&self, mount_point: &str) -> bool {
+        let skip_prefixes = ["/proc", "/sys", "/dev", "/tmp", "/run"];
+        skip_prefixes.iter().any(|prefix| mount_point.starts_with(prefix))
+    }
+
+    /// Use df to get filesystem usage for mount points
+    fn get_filesystem_usage(&self, mount_devices: &HashMap<String, String>) -> Result<HashMap<String, (u64, u64)>> {
+        let mut filesystem_usage = HashMap::new();
+        
+        for mount_point in mount_devices.keys() {
+            match self.get_filesystem_info(mount_point) {
+                Ok((total, used)) => {
+                    filesystem_usage.insert(mount_point.clone(), (total, used));
+                }
+                Err(e) => {
+                    debug!("Failed to get filesystem info for {}: {}", mount_point, e);
                }
            }
        }
        
-        Ok(Vec::new())
+        Ok(filesystem_usage)
    }

-    /// Extract base device name from partition (e.g., "nvme0n1p2" -> "nvme0n1", "sda1" -> "sda")
-    fn extract_base_device(device_name: &str) -> Option<String> {
-        // Handle NVMe devices (nvme0n1p1 -> nvme0n1)
-        if device_name.starts_with("nvme") {
-            if let Some(p_pos) = device_name.find('p') {
-                return Some(device_name[..p_pos].to_string());
-            }
-        }
-        
-        // Handle traditional devices (sda1 -> sda)
-        if device_name.len() > 1 {
-            let chars: Vec<char> = device_name.chars().collect();
-            let mut end_idx = chars.len();
-            
-            // Find where the device name ends and partition number begins
-            for (i, &c) in chars.iter().enumerate().rev() {
-                if !c.is_ascii_digit() {
-                    end_idx = i + 1;
-                    break;
-                }
-            }
-            
-            if end_idx > 0 && end_idx < chars.len() {
-                return Some(chars[..end_idx].iter().collect());
-            }
-        }
-        
-        // If no partition detected, return as-is
-        Some(device_name.to_string())
-    }
-
-
    /// Get filesystem info using df command
    fn get_filesystem_info(&self, path: &str) -> Result<(u64, u64)> {
        let output = Command::new("df")
@@ -381,216 +187,768 @@ impl DiskCollector {
        Ok((total_bytes, used_bytes))
    }

-
-    /// Parse size string (e.g., "120G", "45M") to GB value
-    fn parse_size_to_gb(&self, size_str: &str) -> f32 {
-        let size_str = size_str.trim();
-        if size_str.is_empty() || size_str == "-" {
-            return 0.0;
-        }
-
-        // Extract numeric part and unit
-        let (num_str, unit) = if let Some(last_char) = size_str.chars().last() {
-            if last_char.is_alphabetic() {
-                let num_part = &size_str[..size_str.len() - 1];
-                let unit_part = &size_str[size_str.len() - 1..];
-                (num_part, unit_part)
-            } else {
-                (size_str, "")
+    /// Discover mergerfs pools from /proc/mounts
+    fn discover_mergerfs_pools(&self) -> Result<Vec<MergerfsPool>> {
+        let mounts_content = std::fs::read_to_string("/proc/mounts")?;
+        let mut pools = Vec::new();
+        
+        for line in mounts_content.lines() {
+            let parts: Vec<&str> = line.split_whitespace().collect();
+            if parts.len() >= 3 && parts[2] == "fuse.mergerfs" {
+                let mount_point = parts[1].to_string();
+                let device_sources = parts[0]; // e.g., "/mnt/disk1:/mnt/disk2"
+                
+                // Get pool usage
+                let (total_bytes, used_bytes) = self.get_filesystem_info(&mount_point)
+                    .unwrap_or((0, 0));
+                
+                // Parse member paths - handle both full paths and numeric references
+                let raw_paths: Vec<String> = device_sources
+                    .split(':')
+                    .map(|s| s.trim().to_string())
+                    .filter(|s| !s.is_empty())
+                    .collect();
+                
+                // Convert numeric references to actual mount points if needed
+                let member_paths = if raw_paths.iter().any(|path| !path.starts_with('/')) {
+                    // Handle numeric format like "1:2" by finding corresponding /mnt/disk* paths
+                    self.resolve_numeric_mergerfs_paths(&raw_paths)?
+                } else {
+                    // Already full paths
+                    raw_paths
+                };
+                
+                // Categorize as data vs parity drives
+                let (data_drives, parity_drives) = match self.categorize_pool_drives(&member_paths) {
+                    Ok(drives) => drives,
+                    Err(e) => {
+                        debug!("Failed to categorize drives for pool {}: {}. Skipping.", mount_point, e);
+                        continue;
+                    }
+                };
+                
+                pools.push(MergerfsPool {
+                    mount_point,
+                    total_bytes,
+                    used_bytes,
+                    data_drives,
+                    parity_drives,
+                });
            }
-        } else {
-            (size_str, "")
-        };
-
-        let number: f32 = num_str.parse().unwrap_or(0.0);
-
-        match unit.to_uppercase().as_str() {
-            "T" | "TB" => number * 1024.0,
-            "G" | "GB" => number,
-            "M" | "MB" => number / 1024.0,
-            "K" | "KB" => number / (1024.0 * 1024.0),
-            "B" | "" => number / (1024.0 * 1024.0 * 1024.0),
-            _ => number, // Assume GB if unknown unit
        }
+        
+        Ok(pools)
+    }
+
+    /// Categorize pool member drives as data vs parity
+    fn categorize_pool_drives(&self, member_paths: &[String]) -> Result<(Vec<DriveInfo>, Vec<DriveInfo>)> {
+        let mut data_drives = Vec::new();
+        let mut parity_drives = Vec::new();
+        
+        for path in member_paths {
+            let drive_info = self.get_drive_info_for_path(path)?;
+            
+            // Heuristic: if path contains "parity", it's parity
+            if path.to_lowercase().contains("parity") {
+                parity_drives.push(drive_info);
+            } else {
+                data_drives.push(drive_info);
+            }
+        }
+        
+        Ok((data_drives, parity_drives))
+    }
+
+    /// Get drive information for a mount path
+    fn get_drive_info_for_path(&self, path: &str) -> Result<DriveInfo> {
+        // Use lsblk to find the backing device
+        let output = Command::new("lsblk")
+            .args(&["-n", "-o", "NAME,MOUNTPOINT"])
+            .output()?;
+            
+        let output_str = String::from_utf8_lossy(&output.stdout);
+        let mut device = String::new();
+        
+        for line in output_str.lines() {
+            let parts: Vec<&str> = line.split_whitespace().collect();
+            if parts.len() >= 2 && parts[1] == path {
+                device = parts[0]
+                    .trim_start_matches('├')
+                    .trim_start_matches('└')
+                    .trim_start_matches('─')
+                    .trim()
+                    .to_string();
+                break;
+            }
+        }
+        
+        if device.is_empty() {
+            return Err(anyhow::anyhow!("Could not find device for path {}", path));
+        }
+        
+        // Extract base device name (e.g., "sda1" -> "sda")
+        let base_device = self.extract_base_device(&device);
+        
+        // Get SMART data
+        let (health, temperature, wear) = self.get_smart_data(&format!("/dev/{}", base_device));
+        
+        Ok(DriveInfo {
+            device: base_device,
+            mount_point: path.to_string(),
+            temperature,
+            wear_level: wear,
+            health_status: health,
+        })
+    }
+
+    /// Resolve numeric mergerfs references like "1:2" to actual mount paths
+    fn resolve_numeric_mergerfs_paths(&self, numeric_refs: &[String]) -> Result<Vec<String>> {
+        let mut resolved_paths = Vec::new();
+        
+        // Get all mount points that look like /mnt/disk* or /mnt/parity*
+        let mount_devices = self.get_mount_devices()?;
+        let mut disk_mounts: Vec<String> = mount_devices.keys()
+            .filter(|path| path.starts_with("/mnt/disk") || path.starts_with("/mnt/parity"))
+            .cloned()
+            .collect();
+        disk_mounts.sort(); // Ensure consistent ordering
+        
+        for num_ref in numeric_refs {
+            if let Ok(index) = num_ref.parse::<usize>() {
+                // Convert 1-based index to 0-based
+                if index > 0 && index <= disk_mounts.len() {
+                    resolved_paths.push(disk_mounts[index - 1].clone());
+                }
+            }
+        }
+        
+        // Fallback: if we couldn't resolve, return the original paths
+        if resolved_paths.is_empty() {
+            resolved_paths = numeric_refs.to_vec();
+        }
+        
+        Ok(resolved_paths)
+    }
+
+    /// Extract base device name from partition (e.g., "nvme0n1p2" -> "nvme0n1", "sda1" -> "sda")
+    fn extract_base_device(&self, device_name: &str) -> String {
+        // Handle NVMe devices (nvme0n1p1 -> nvme0n1)
+        if device_name.starts_with("nvme") {
+            if let Some(p_pos) = device_name.find('p') {
+                return device_name[..p_pos].to_string();
+            }
+        }
+        
+        // Handle traditional devices (sda1 -> sda)
+        if device_name.len() > 1 {
+            let chars: Vec<char> = device_name.chars().collect();
+            let mut end_idx = chars.len();
+            
+            // Find where the device name ends and partition number begins
+            for (i, &c) in chars.iter().enumerate().rev() {
+                if !c.is_ascii_digit() {
+                    end_idx = i + 1;
+                    break;
+                }
+            }
+            
+            if end_idx > 0 && end_idx < chars.len() {
+                return chars[..end_idx].iter().collect();
+            }
+        }
+        
+        // If no partition detected, return as-is
+        device_name.to_string()
+    }
+
+    /// Group filesystems by physical drive (excluding mergerfs members)
+    fn group_by_physical_drive(
+        &self, 
+        mount_devices: &HashMap<String, String>,
+        filesystem_usage: &HashMap<String, (u64, u64)>,
+        mergerfs_pools: &[MergerfsPool]
+    ) -> Result<Vec<PhysicalDrive>> {
+        let mut drive_groups: HashMap<String, Vec<Filesystem>> = HashMap::new();
+        
+        // Get all mergerfs member paths to exclude them
+        let mut mergerfs_members = std::collections::HashSet::new();
+        for pool in mergerfs_pools {
+            for drive in &pool.data_drives {
+                mergerfs_members.insert(drive.mount_point.clone());
+            }
+            for drive in &pool.parity_drives {
+                mergerfs_members.insert(drive.mount_point.clone());
+            }
+        }
+        
+        // Group filesystems by base device
+        for (mount_point, device) in mount_devices {
+            // Skip mergerfs member mounts
+            if mergerfs_members.contains(mount_point) {
+                continue;
+            }
+            
+            let base_device = self.extract_base_device(device);
+            
+            if let Some((total, used)) = filesystem_usage.get(mount_point) {
+                let filesystem = Filesystem {
+                    mount_point: mount_point.clone(),
+                    total_bytes: *total,
+                    used_bytes: *used,
+                };
+                
+                drive_groups.entry(base_device).or_insert_with(Vec::new).push(filesystem);
+            }
+        }
+        
+        // Convert to PhysicalDrive structs with SMART data
+        let mut physical_drives = Vec::new();
+        for (device, filesystems) in drive_groups {
+            let (health, temperature, wear) = self.get_smart_data(&format!("/dev/{}", device));
+            
+            physical_drives.push(PhysicalDrive {
+                device,
+                filesystems,
+                temperature,
+                wear_level: wear,
+                health_status: health,
+            });
+        }
+        
+        Ok(physical_drives)
+    }
+
+    /// Get SMART data for a drive
+    fn get_smart_data(&self, device_path: &str) -> (String, Option<f32>, Option<f32>) {
+        let output = Command::new("sudo")
+            .arg("smartctl")
+            .arg("-a")
+            .arg(device_path)
+            .output();
+            
+        match output {
+            Ok(result) if result.status.success() => {
+                let stdout = String::from_utf8_lossy(&result.stdout);
+                
+                // Parse health status
+                let health = if stdout.contains("PASSED") {
+                    "PASSED".to_string()
+                } else if stdout.contains("FAILED") {
+                    "FAILED".to_string()
+                } else {
+                    "UNKNOWN".to_string()
+                };
+                
+                // Parse temperature and wear level
+                let temperature = self.parse_temperature_from_smart(&stdout);
+                let wear_level = self.parse_wear_level_from_smart(&stdout);
+                
+                (health, temperature, wear_level)
+            }
+            _ => {
+                debug!("Failed to get SMART data for {}", device_path);
+                ("UNKNOWN".to_string(), None, None)
+            }
+        }
+    }
+
+    /// Parse temperature from SMART output
+    fn parse_temperature_from_smart(&self, smart_output: &str) -> Option<f32> {
+        for line in smart_output.lines() {
+            if line.contains("Temperature_Celsius") || line.contains("Temperature") {
+                let parts: Vec<&str> = line.split_whitespace().collect();
+                if parts.len() >= 10 {
+                    if let Ok(temp) = parts[9].parse::<f32>() {
+                        return Some(temp);
+                    }
+                }
+            }
+            if line.contains("temperature:") {
+                if let Some(temp_part) = line.split("temperature:").nth(1) {
+                    if let Some(temp_str) = temp_part.split_whitespace().next() {
+                        if let Ok(temp) = temp_str.parse::<f32>() {
+                            return Some(temp);
+                        }
+                    }
+                }
+            }
+        }
+        None
+    }
+
+    /// Parse wear level from SMART output
+    fn parse_wear_level_from_smart(&self, smart_output: &str) -> Option<f32> {
+        for line in smart_output.lines() {
+            if line.contains("Percentage Used:") {
+                if let Some(wear_part) = line.split("Percentage Used:").nth(1) {
+                    if let Some(wear_str) = wear_part.split('%').next() {
+                        if let Ok(wear) = wear_str.trim().parse::<f32>() {
+                            return Some(wear);
+                        }
+                    }
+                }
+            }
+            
+            let parts: Vec<&str> = line.split_whitespace().collect();
+            if parts.len() >= 10 {
+                if line.contains("SSD_Life_Left") || line.contains("Percent_Lifetime_Remain") {
+                    if let Ok(remaining) = parts[3].parse::<f32>() {
+                        return Some(100.0 - remaining);
+                    }
+                }
+                if line.contains("Wear_Leveling_Count") {
+                    if let Ok(wear_count) = parts[3].parse::<f32>() {
+                        if wear_count <= 100.0 {
+                            return Some(100.0 - wear_count);
+                        }
+                    }
+                }
+            }
+        }
+        None
+    }
+
+    /// Calculate temperature status with hysteresis
+    fn calculate_temperature_status(&self, metric_name: &str, temperature: f32, status_tracker: &mut StatusTracker) -> Status {
+        status_tracker.calculate_with_hysteresis(metric_name, temperature, &self.temperature_thresholds)
+    }
+
+    /// Convert bytes to human readable format
+    fn bytes_to_human_readable(&self, bytes: u64) -> String {
+        const UNITS: &[&str] = &["B", "K", "M", "G", "T"];
+        let mut size = bytes as f64;
+        let mut unit_index = 0;
+
+        while size >= 1024.0 && unit_index < UNITS.len() - 1 {
+            size /= 1024.0;
+            unit_index += 1;
+        }
+
+        if unit_index == 0 {
+            format!("{:.0}{}", size, UNITS[unit_index])
+        } else {
+            format!("{:.1}{}", size, UNITS[unit_index])
+        }
+    }
+
+    /// Convert bytes to gigabytes
+    fn bytes_to_gb(&self, bytes: u64) -> f32 {
+        bytes as f32 / (1024.0 * 1024.0 * 1024.0)
    }
 }

 #[async_trait]
 impl Collector for DiskCollector {
-
    async fn collect(&self, status_tracker: &mut StatusTracker) -> Result<Vec<Metric>, CollectorError> {
        let start_time = Instant::now();
-        debug!("Collecting storage pool and individual drive metrics");
+        debug!("Starting clean storage collection");

        let mut metrics = Vec::new();
+        let timestamp = chrono::Utc::now().timestamp() as u64;

-        // Get configured storage pools with individual drive data
-        let storage_pools = match self.get_configured_storage_pools() {
-            Ok(pools) => {
-                debug!("Found {} storage pools", pools.len());
-                pools
-            }
+        // Discover storage topology
+        let topology = match self.discover_storage() {
+            Ok(topology) => topology,
            Err(e) => {
-                debug!("Failed to get storage pools: {}", e);
-                Vec::new()
+                tracing::error!("Storage discovery failed: {}", e);
+                return Ok(metrics);
            }
        };

-        // Generate metrics for each storage pool and its underlying drives
-        for storage_pool in &storage_pools {
-            let timestamp = chrono::Utc::now().timestamp() as u64;
+        // Generate metrics for physical drives
+        for drive in &topology.physical_drives {
+            self.generate_physical_drive_metrics(&mut metrics, drive, timestamp, status_tracker);
+        }

-            // Storage pool overall metrics
-            let pool_name = &storage_pool.name;
-            
-            // Parse size strings to get actual values for calculations
-            let size_gb = self.parse_size_to_gb(&storage_pool.size);
-            let used_gb = self.parse_size_to_gb(&storage_pool.used);
-            let avail_gb = self.parse_size_to_gb(&storage_pool.available);
+        // Generate metrics for mergerfs pools
+        for pool in &topology.mergerfs_pools {
+            self.generate_mergerfs_pool_metrics(&mut metrics, pool, timestamp, status_tracker);
+        }

-            // Calculate status based on configured thresholds
-            let pool_status = if storage_pool.usage_percent >= self.config.usage_critical_percent {
+        // Add total storage count
+        let total_storage = topology.physical_drives.len() + topology.mergerfs_pools.len();
+        metrics.push(Metric {
+            name: "disk_count".to_string(),
+            value: MetricValue::Integer(total_storage as i64),
+            unit: None,
+            description: Some(format!("Total storage: {} drives, {} pools", topology.physical_drives.len(), topology.mergerfs_pools.len())),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        let collection_time = start_time.elapsed();
+        debug!("Clean storage collection completed in {:?} with {} metrics", collection_time, metrics.len());
+
+        Ok(metrics)
+    }
+}
+
+impl DiskCollector {
+    /// Generate metrics for a physical drive and its filesystems
+    fn generate_physical_drive_metrics(
+        &self,
+        metrics: &mut Vec<Metric>,
+        drive: &PhysicalDrive,
+        timestamp: u64,
+        status_tracker: &mut StatusTracker
+    ) {
+        let drive_name = &drive.device;
+        
+        // Calculate drive totals
+        let total_capacity: u64 = drive.filesystems.iter().map(|fs| fs.total_bytes).sum();
+        let total_used: u64 = drive.filesystems.iter().map(|fs| fs.used_bytes).sum();
+        let total_available = total_capacity.saturating_sub(total_used);
+        let usage_percent = if total_capacity > 0 {
+            (total_used as f64 / total_capacity as f64) * 100.0
+        } else { 0.0 };
+        
+        // Drive health status
+        let health_status = if drive.health_status == "PASSED" { Status::Ok } 
+                           else if drive.health_status == "FAILED" { Status::Critical }
+                           else { Status::Unknown };
+        
+        // Usage status
+        let usage_status = if usage_percent >= self.config.usage_critical_percent as f64 {
+            Status::Critical
+        } else if usage_percent >= self.config.usage_warning_percent as f64 {
+            Status::Warning
+        } else {
+            Status::Ok
+        };
+        
+        let drive_status = if health_status == Status::Critical { Status::Critical } else { usage_status };
+
+        // Drive info metrics
+        metrics.push(Metric {
+            name: format!("disk_{}_health", drive_name),
+            value: MetricValue::String(drive.health_status.clone()),
+            unit: None,
+            description: Some(format!("{}: {}", drive_name, drive.health_status)),
+            status: health_status,
+            timestamp,
+        });
+
+        // Drive temperature
+        if let Some(temp) = drive.temperature {
+            let temp_status = self.calculate_temperature_status(
+                &format!("disk_{}_temperature", drive_name), temp, status_tracker
+            );
+            metrics.push(Metric {
+                name: format!("disk_{}_temperature", drive_name),
+                value: MetricValue::Float(temp),
+                unit: Some("°C".to_string()),
+                description: Some(format!("{}: {:.0}°C", drive_name, temp)),
+                status: temp_status,
+                timestamp,
+            });
+        }
+
+        // Drive wear level
+        if let Some(wear) = drive.wear_level {
+            let wear_status = if wear >= self.config.wear_critical_percent { Status::Critical }
+                             else if wear >= self.config.wear_warning_percent { Status::Warning }
+                             else { Status::Ok };
+            metrics.push(Metric {
+                name: format!("disk_{}_wear_percent", drive_name),
+                value: MetricValue::Float(wear),
+                unit: Some("%".to_string()),
+                description: Some(format!("{}: {:.0}% wear", drive_name, wear)),
+                status: wear_status,
+                timestamp,
+            });
+        }
+
+        // Drive capacity metrics
+        metrics.push(Metric {
+            name: format!("disk_{}_total_gb", drive_name),
+            value: MetricValue::Float(self.bytes_to_gb(total_capacity)),
+            unit: Some("GB".to_string()),
+            description: Some(format!("{}: {}", drive_name, self.bytes_to_human_readable(total_capacity))),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_used_gb", drive_name),
+            value: MetricValue::Float(self.bytes_to_gb(total_used)),
+            unit: Some("GB".to_string()),
+            description: Some(format!("{}: {}", drive_name, self.bytes_to_human_readable(total_used))),
+            status: drive_status.clone(),
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_available_gb", drive_name),
+            value: MetricValue::Float(self.bytes_to_gb(total_available)),
+            unit: Some("GB".to_string()),
+            description: Some(format!("{}: {}", drive_name, self.bytes_to_human_readable(total_available))),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_usage_percent", drive_name),
+            value: MetricValue::Float(usage_percent as f32),
+            unit: Some("%".to_string()),
+            description: Some(format!("{}: {:.1}%", drive_name, usage_percent)),
+            status: drive_status,
+            timestamp,
+        });
+
+        // Pool type indicator
+        metrics.push(Metric {
+            name: format!("disk_{}_pool_type", drive_name),
+            value: MetricValue::String(format!("drive ({})", drive.filesystems.len())),
+            unit: None,
+            description: Some(format!("Type: physical drive")),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        // Individual filesystem metrics
+        for filesystem in &drive.filesystems {
+            let fs_name = if filesystem.mount_point == "/" {
+                "root".to_string()
+            } else {
+                filesystem.mount_point.trim_start_matches('/').replace('/', "_")
+            };
+
+            let fs_usage_percent = if filesystem.total_bytes > 0 {
+                (filesystem.used_bytes as f64 / filesystem.total_bytes as f64) * 100.0
+            } else { 0.0 };
+
+            let fs_status = if fs_usage_percent >= self.config.usage_critical_percent as f64 {
                Status::Critical
-            } else if storage_pool.usage_percent >= self.config.usage_warning_percent {
+            } else if fs_usage_percent >= self.config.usage_warning_percent as f64 {
                Status::Warning
            } else {
                Status::Ok
            };

-            // Storage pool info metrics
            metrics.push(Metric {
-                name: format!("disk_{}_mount_point", pool_name),
-                value: MetricValue::String(storage_pool.mount_point.clone()),
-                unit: None,
-                description: Some(format!("Mount: {}", storage_pool.mount_point)),
-                status: Status::Ok,
-                timestamp,
-            });
-
-            metrics.push(Metric {
-                name: format!("disk_{}_filesystem", pool_name),
-                value: MetricValue::String(storage_pool.filesystem.clone()),
-                unit: None,
-                description: Some(format!("FS: {}", storage_pool.filesystem)),
-                status: Status::Ok,
-                timestamp,
-            });
-
-            metrics.push(Metric {
-                name: format!("disk_{}_storage_type", pool_name),
-                value: MetricValue::String(storage_pool.storage_type.clone()),
-                unit: None,
-                description: Some(format!("Type: {}", storage_pool.storage_type)),
-                status: Status::Ok,
-                timestamp,
-            });
-
-            // Storage pool size metrics
-            metrics.push(Metric {
-                name: format!("disk_{}_total_gb", pool_name),
-                value: MetricValue::Float(size_gb),
-                unit: Some("GB".to_string()),
-                description: Some(format!("Total: {}", storage_pool.size)),
-                status: Status::Ok,
-                timestamp,
-            });
-
-            metrics.push(Metric {
-                name: format!("disk_{}_used_gb", pool_name),
-                value: MetricValue::Float(used_gb),
-                unit: Some("GB".to_string()),
-                description: Some(format!("Used: {}", storage_pool.used)),
-                status: pool_status,
-                timestamp,
-            });
-
-            metrics.push(Metric {
-                name: format!("disk_{}_available_gb", pool_name),
-                value: MetricValue::Float(avail_gb),
-                unit: Some("GB".to_string()),
-                description: Some(format!("Available: {}", storage_pool.available)),
-                status: Status::Ok,
-                timestamp,
-            });
-
-            metrics.push(Metric {
-                name: format!("disk_{}_usage_percent", pool_name),
-                value: MetricValue::Float(storage_pool.usage_percent),
+                name: format!("disk_{}_fs_{}_usage_percent", drive_name, fs_name),
+                value: MetricValue::Float(fs_usage_percent as f32),
                unit: Some("%".to_string()),
-                description: Some(format!("Usage: {:.1}%", storage_pool.usage_percent)),
-                status: pool_status,
+                description: Some(format!("{}: {:.0}%", filesystem.mount_point, fs_usage_percent)),
+                status: fs_status.clone(),
                timestamp,
            });

-            // Individual drive metrics for this storage pool
-            for drive in &storage_pool.underlying_drives {
-                // Drive health status
-                metrics.push(Metric {
-                    name: format!("disk_{}_{}_health", pool_name, drive.device),
-                    value: MetricValue::String(drive.health_status.clone()),
-                    unit: None,
-                    description: Some(format!("{}: {}", drive.device, drive.health_status)),
-                    status: if drive.health_status == "PASSED" { Status::Ok } 
-                            else if drive.health_status == "FAILED" { Status::Critical }
-                            else { Status::Unknown },
-                    timestamp,
-                });
+            metrics.push(Metric {
+                name: format!("disk_{}_fs_{}_used_gb", drive_name, fs_name),
+                value: MetricValue::Float(self.bytes_to_gb(filesystem.used_bytes)),
+                unit: Some("GB".to_string()),
+                description: Some(format!("{}: {}", filesystem.mount_point, self.bytes_to_human_readable(filesystem.used_bytes))),
+                status: fs_status.clone(),
+                timestamp,
+            });

-                // Drive temperature
-                if let Some(temp) = drive.temperature {
-                    let temp_status = self.calculate_temperature_status(
-                        &format!("disk_{}_{}_temperature", pool_name, drive.device),
-                        temp,
-                        status_tracker
-                    );
-                    
-                    metrics.push(Metric {
-                        name: format!("disk_{}_{}_temperature", pool_name, drive.device),
-                        value: MetricValue::Float(temp),
-                        unit: Some("°C".to_string()),
-                        description: Some(format!("{}: {:.0}°C", drive.device, temp)),
-                        status: temp_status,
-                        timestamp,
-                    });
-                }
+            metrics.push(Metric {
+                name: format!("disk_{}_fs_{}_total_gb", drive_name, fs_name),
+                value: MetricValue::Float(self.bytes_to_gb(filesystem.total_bytes)),
+                unit: Some("GB".to_string()),
+                description: Some(format!("{}: {}", filesystem.mount_point, self.bytes_to_human_readable(filesystem.total_bytes))),
+                status: fs_status.clone(),
+                timestamp,
+            });

-                // Drive wear level (for SSDs)
-                if let Some(wear) = drive.wear_level {
-                    let wear_status = if wear >= self.config.wear_critical_percent { Status::Critical }
-                                     else if wear >= self.config.wear_warning_percent { Status::Warning }
-                                     else { Status::Ok };
-                    
-                    metrics.push(Metric {
-                        name: format!("disk_{}_{}_wear_percent", pool_name, drive.device),
-                        value: MetricValue::Float(wear),
-                        unit: Some("%".to_string()),
-                        description: Some(format!("{}: {:.0}% wear", drive.device, wear)),
-                        status: wear_status,
-                        timestamp,
-                    });
-                }
-            }
+            let fs_available = filesystem.total_bytes.saturating_sub(filesystem.used_bytes);
+            metrics.push(Metric {
+                name: format!("disk_{}_fs_{}_available_gb", drive_name, fs_name),
+                value: MetricValue::Float(self.bytes_to_gb(fs_available)),
+                unit: Some("GB".to_string()),
+                description: Some(format!("{}: {}", filesystem.mount_point, self.bytes_to_human_readable(fs_available))),
+                status: Status::Ok,
+                timestamp,
+            });
+
+            metrics.push(Metric {
+                name: format!("disk_{}_fs_{}_mount_point", drive_name, fs_name),
+                value: MetricValue::String(filesystem.mount_point.clone()),
+                unit: None,
+                description: Some(format!("Mount: {}", filesystem.mount_point)),
+                status: Status::Ok,
+                timestamp,
+            });
        }
-
-        // Add storage pool count metric
-        metrics.push(Metric {
-            name: "disk_count".to_string(),
-            value: MetricValue::Integer(storage_pools.len() as i64),
-            unit: None,
-            description: Some(format!("Total storage pools: {}", storage_pools.len())),
-            status: Status::Ok,
-            timestamp: chrono::Utc::now().timestamp() as u64,
-        });
-
-
-        let collection_time = start_time.elapsed();
-        debug!(
-            "Multi-disk collection completed in {:?} with {} metrics",
-            collection_time,
-            metrics.len()
-        );
-
-        Ok(metrics)
    }

-}
+    /// Generate metrics for a mergerfs pool
+    fn generate_mergerfs_pool_metrics(
+        &self,
+        metrics: &mut Vec<Metric>,
+        pool: &MergerfsPool,
+        timestamp: u64,
+        status_tracker: &mut StatusTracker
+    ) {
+        // Use consistent pool naming: extract mount point without leading slash
+        let pool_name = if pool.mount_point == "/" {
+            "root".to_string()
+        } else {
+            pool.mount_point.trim_start_matches('/').replace('/', "_")
+        };
+        
+        if pool_name.is_empty() {
+            return;
+        }
+
+        let usage_percent = if pool.total_bytes > 0 {
+            (pool.used_bytes as f64 / pool.total_bytes as f64) * 100.0
+        } else { 0.0 };
+
+        // Calculate pool health based on drive health
+        let failed_data = pool.data_drives.iter()
+            .filter(|d| d.health_status != "PASSED")
+            .count();
+        let failed_parity = pool.parity_drives.iter()
+            .filter(|d| d.health_status != "PASSED")
+            .count();
+
+        let pool_health = match (failed_data, failed_parity) {
+            (0, 0) => Status::Ok,
+            (1, 0) | (0, 1) => Status::Warning,
+            _ => Status::Critical,
+        };
+
+        let usage_status = if usage_percent >= self.config.usage_critical_percent as f64 {
+            Status::Critical
+        } else if usage_percent >= self.config.usage_warning_percent as f64 {
+            Status::Warning
+        } else {
+            Status::Ok
+        };
+
+        let pool_status = if pool_health == Status::Critical { Status::Critical } else { usage_status };
+
+        // Pool metrics
+        metrics.push(Metric {
+            name: format!("disk_{}_mount_point", pool_name),
+            value: MetricValue::String(pool.mount_point.clone()),
+            unit: None,
+            description: Some(format!("Mount: {}", pool.mount_point)),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_pool_type", pool_name),
+            value: MetricValue::String(format!("mergerfs ({}+{})", pool.data_drives.len(), pool.parity_drives.len())),
+            unit: None,
+            description: Some("Type: mergerfs".to_string()),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_pool_health", pool_name),
+            value: MetricValue::String(match pool_health {
+                Status::Ok => "healthy".to_string(),
+                Status::Warning => "degraded".to_string(),
+                Status::Critical => "critical".to_string(),
+                _ => "unknown".to_string(),
+            }),
+            unit: None,
+            description: Some("Pool health".to_string()),
+            status: pool_health,
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_total_gb", pool_name),
+            value: MetricValue::Float(self.bytes_to_gb(pool.total_bytes)),
+            unit: Some("GB".to_string()),
+            description: Some(format!("Total: {}", self.bytes_to_human_readable(pool.total_bytes))),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_used_gb", pool_name),
+            value: MetricValue::Float(self.bytes_to_gb(pool.used_bytes)),
+            unit: Some("GB".to_string()),
+            description: Some(format!("Used: {}", self.bytes_to_human_readable(pool.used_bytes))),
+            status: pool_status.clone(),
+            timestamp,
+        });
+
+        let available_bytes = pool.total_bytes.saturating_sub(pool.used_bytes);
+        metrics.push(Metric {
+            name: format!("disk_{}_available_gb", pool_name),
+            value: MetricValue::Float(self.bytes_to_gb(available_bytes)),
+            unit: Some("GB".to_string()),
+            description: Some(format!("Available: {}", self.bytes_to_human_readable(available_bytes))),
+            status: Status::Ok,
+            timestamp,
+        });
+
+        metrics.push(Metric {
+            name: format!("disk_{}_usage_percent", pool_name),
+            value: MetricValue::Float(usage_percent as f32),
+            unit: Some("%".to_string()),
+            description: Some(format!("Usage: {:.1}%", usage_percent)),
+            status: pool_status,
+            timestamp,
+        });
+
+        // Individual drive metrics
+        for (i, drive) in pool.data_drives.iter().enumerate() {
+            self.generate_pool_drive_metrics(metrics, &pool_name, &format!("data_{}", i), drive, timestamp, status_tracker);
+        }
+
+        for (i, drive) in pool.parity_drives.iter().enumerate() {
+            self.generate_pool_drive_metrics(metrics, &pool_name, &format!("parity_{}", i), drive, timestamp, status_tracker);
+        }
+    }
+
+    /// Generate metrics for drives in mergerfs pools
+    fn generate_pool_drive_metrics(
+        &self,
+        metrics: &mut Vec<Metric>,
+        pool_name: &str,
+        drive_role: &str,
+        drive: &DriveInfo,
+        timestamp: u64,
+        status_tracker: &mut StatusTracker
+    ) {
+        let drive_health = if drive.health_status == "PASSED" { Status::Ok }
+                          else if drive.health_status == "FAILED" { Status::Critical }
+                          else { Status::Unknown };
+
+        metrics.push(Metric {
+            name: format!("disk_{}_{}_health", pool_name, drive_role),
+            value: MetricValue::String(drive.health_status.clone()),
+            unit: None,
+            description: Some(format!("{}: {}", drive.device, drive.health_status)),
+            status: drive_health,
+            timestamp,
+        });
+
+        if let Some(temp) = drive.temperature {
+            let temp_status = self.calculate_temperature_status(
+                &format!("disk_{}_{}_temperature", pool_name, drive_role), temp, status_tracker
+            );
+            metrics.push(Metric {
+                name: format!("disk_{}_{}_temperature", pool_name, drive_role),
+                value: MetricValue::Float(temp),
+                unit: Some("°C".to_string()),
+                description: Some(format!("{}: {:.0}°C", drive.device, temp)),
+                status: temp_status,
+                timestamp,
+            });
+        }
+
+        if let Some(wear) = drive.wear_level {
+            let wear_status = if wear >= self.config.wear_critical_percent { Status::Critical }
+                             else if wear >= self.config.wear_warning_percent { Status::Warning }
+                             else { Status::Ok };
+            metrics.push(Metric {
+                name: format!("disk_{}_{}_wear_percent", pool_name, drive_role),
+                value: MetricValue::Float(wear),
+                unit: Some("%".to_string()),
+                description: Some(format!("{}: {:.0}% wear", drive.device, wear)),
+                status: wear_status,
+                timestamp,
+            });
+        }
+    }
+}
--- a/agent/src/collectors/disk_old.rs
+++ b/agent/src/collectors/disk_old.rs
@@ -0,0 +1,1327 @@
+use anyhow::Result;
+use async_trait::async_trait;
+use cm_dashboard_shared::{Metric, MetricValue, Status, StatusTracker, HysteresisThresholds};
+
+use crate::config::DiskConfig;
+use std::process::Command;
+use std::time::Instant;
+use std::fs;
+use tracing::debug;
+
+use super::{Collector, CollectorError};
+
+/// Mount point information from /proc/mounts
+#[derive(Debug, Clone)]
+struct MountInfo {
+    device: String,      // e.g., "/dev/sda1" or "/mnt/disk1:/mnt/disk2"
+    mount_point: String, // e.g., "/", "/srv/media"
+    fs_type: String,     // e.g., "ext4", "xfs", "fuse.mergerfs"
+}
+
+/// Auto-discovered storage topology
+#[derive(Debug, Clone)]
+struct StorageTopology {
+    single_disks: Vec<MountInfo>,
+    mergerfs_pools: Vec<MergerfsPoolInfo>,
+}
+
+/// MergerFS pool information
+#[derive(Debug, Clone)]
+struct MergerfsPoolInfo {
+    mount_point: String,          // e.g., "/srv/media"
+    data_members: Vec<String>,    // e.g., ["/mnt/disk1", "/mnt/disk2"]
+    parity_disks: Vec<String>,    // e.g., ["/mnt/parity"]
+}
+
+/// Information about a storage pool (mount point with underlying drives)
+#[derive(Debug, Clone)]
+struct StoragePool {
+    name: String,            // e.g., "steampool", "root"
+    mount_point: String,     // e.g., "/mnt/steampool", "/"
+    filesystem: String,      // e.g., "mergerfs", "ext4", "zfs", "btrfs"
+    pool_type: StoragePoolType, // Enhanced pool type with configuration
+    size: String,            // e.g., "2.5TB"
+    used: String,            // e.g., "2.1TB"
+    available: String,       // e.g., "400GB"
+    usage_percent: f32,      // e.g., 85.0
+    underlying_drives: Vec<DriveInfo>, // Individual physical drives
+    pool_health: PoolHealth, // Overall pool health status
+}
+
+/// Enhanced storage pool types with specific configurations
+#[derive(Debug, Clone)]
+enum StoragePoolType {
+    Single,                    // Traditional single disk (legacy)
+    PhysicalDrive {           // Physical drive with multiple filesystems
+        filesystems: Vec<String>,     // Mount points on this drive
+    },
+    MergerfsPool {            // MergerFS with optional parity
+        data_disks: Vec<String>,      // Member disk names (sdb, sdd)
+        parity_disks: Vec<String>,    // Parity disk names (sdc)
+    },
+    #[allow(dead_code)]
+    RaidArray {               // Hardware RAID (future)
+        level: String,               // "RAID1", "RAID5", etc.
+        member_disks: Vec<String>,   
+        spare_disks: Vec<String>,
+    },
+    #[allow(dead_code)]
+    ZfsPool {                 // ZFS pool (future)
+        pool_name: String,
+        vdevs: Vec<String>,
+    }
+}
+
+/// Pool health status for redundant storage
+#[derive(Debug, Clone, Copy, PartialEq)]
+enum PoolHealth {
+    Healthy,           // All drives OK, parity current
+    Degraded,          // One drive failed or parity outdated, still functional
+    Critical,          // Multiple failures, data at risk
+    #[allow(dead_code)]
+    Rebuilding,        // Actively rebuilding/scrubbing (future: SnapRAID status integration)
+    Unknown,           // Cannot determine status
+}
+
+/// Information about an individual physical drive
+#[derive(Debug, Clone)]
+struct DriveInfo {
+    device: String,          // e.g., "sda", "nvme0n1"
+    health_status: String,   // e.g., "PASSED", "FAILED"
+    temperature: Option<f32>, // e.g., 45.0°C
+    wear_level: Option<f32>, // e.g., 12.0% (for SSDs)
+}
+
+/// Disk usage collector for monitoring filesystem sizes
+pub struct DiskCollector {
+    config: DiskConfig,
+    temperature_thresholds: HysteresisThresholds,
+    detected_devices: std::collections::HashMap<String, Vec<String>>, // mount_point -> devices
+    storage_topology: Option<StorageTopology>, // Auto-discovered storage layout
+}
+
+impl DiskCollector {
+    pub fn new(config: DiskConfig) -> Self {
+        // Create hysteresis thresholds for disk temperature from config
+        let temperature_thresholds = HysteresisThresholds::with_custom_gaps(
+            config.temperature_warning_celsius,
+            5.0,  // 5°C gap for recovery
+            config.temperature_critical_celsius,
+            5.0,  // 5°C gap for recovery
+        );
+        
+        // Perform auto-discovery of storage topology
+        let storage_topology = match Self::auto_discover_storage() {
+            Ok(topology) => {
+                debug!("Auto-discovered storage topology: {} single disks, {} mergerfs pools", 
+                       topology.single_disks.len(), topology.mergerfs_pools.len());
+                Some(topology)
+            }
+            Err(e) => {
+                debug!("Failed to auto-discover storage topology: {}", e);
+                None
+            }
+        };
+        
+        // Detect devices for discovered storage
+        let mut detected_devices = std::collections::HashMap::new();
+        if let Some(ref topology) = storage_topology {
+            // Add single disks
+            for disk in &topology.single_disks {
+                if let Ok(devices) = Self::detect_device_for_mount_point_static(&disk.mount_point) {
+                    detected_devices.insert(disk.mount_point.clone(), devices);
+                }
+            }
+            
+            // Add mergerfs pools and their members
+            for pool in &topology.mergerfs_pools {
+                // Detect devices for the pool itself
+                if let Ok(devices) = Self::detect_device_for_mount_point_static(&pool.mount_point) {
+                    detected_devices.insert(pool.mount_point.clone(), devices);
+                }
+                
+                // Detect devices for member disks
+                for member in &pool.data_members {
+                    if let Ok(devices) = Self::detect_device_for_mount_point_static(member) {
+                        detected_devices.insert(member.clone(), devices);
+                    }
+                }
+                
+                // Detect devices for parity disks
+                for parity in &pool.parity_disks {
+                    if let Ok(devices) = Self::detect_device_for_mount_point_static(parity) {
+                        detected_devices.insert(parity.clone(), devices);
+                    }
+                }
+            }
+        } else {
+            // Fallback: use legacy filesystem config detection
+            for fs_config in &config.filesystems {
+                if fs_config.monitor {
+                    if let Ok(devices) = Self::detect_device_for_mount_point_static(&fs_config.mount_point) {
+                        detected_devices.insert(fs_config.mount_point.clone(), devices);
+                    }
+                }
+            }
+        }
+        
+        Self { 
+            config,
+            temperature_thresholds,
+            detected_devices,
+            storage_topology,
+        }
+    }
+
+    /// Auto-discover storage topology by parsing system information
+    fn auto_discover_storage() -> Result<StorageTopology> {
+        let mounts = Self::parse_proc_mounts()?;
+        let mut single_disks = Vec::new();
+        let mut mergerfs_pools = Vec::new();
+        
+        // Filter out unwanted filesystem types and mount points
+        let exclude_fs_types = ["tmpfs", "devtmpfs", "sysfs", "proc", "cgroup", "cgroup2", "devpts"];
+        let exclude_mount_prefixes = ["/proc", "/sys", "/dev", "/tmp", "/run"];
+        
+        for mount in mounts {
+            // Skip excluded filesystem types
+            if exclude_fs_types.contains(&mount.fs_type.as_str()) {
+                continue;
+            }
+            
+            // Skip excluded mount point prefixes
+            if exclude_mount_prefixes.iter().any(|prefix| mount.mount_point.starts_with(prefix)) {
+                continue;
+            }
+            
+            match mount.fs_type.as_str() {
+                "fuse.mergerfs" => {
+                    // Parse mergerfs pool
+                    let data_members = Self::parse_mergerfs_sources(&mount.device);
+                    let parity_disks = Self::detect_parity_disks(&data_members);
+                    
+                    mergerfs_pools.push(MergerfsPoolInfo {
+                        mount_point: mount.mount_point.clone(),
+                        data_members,
+                        parity_disks,
+                    });
+                    
+                    debug!("Discovered mergerfs pool at {}", mount.mount_point);
+                }
+                "ext4" | "xfs" | "btrfs" | "ntfs" | "vfat" => {
+                    // Check if this mount is part of a mergerfs pool
+                    let is_mergerfs_member = mergerfs_pools.iter()
+                        .any(|pool| pool.data_members.contains(&mount.mount_point) || 
+                                   pool.parity_disks.contains(&mount.mount_point));
+                    
+                    if !is_mergerfs_member {
+                        debug!("Discovered single disk at {}", mount.mount_point);
+                        single_disks.push(mount);
+                    }
+                }
+                _ => {
+                    debug!("Skipping unsupported filesystem type: {}", mount.fs_type);
+                }
+            }
+        }
+        
+        Ok(StorageTopology {
+            single_disks,
+            mergerfs_pools,
+        })
+    }
+
+    /// Parse /proc/mounts to get all mount information
+    fn parse_proc_mounts() -> Result<Vec<MountInfo>> {
+        let mounts_content = fs::read_to_string("/proc/mounts")?;
+        let mut mounts = Vec::new();
+        
+        for line in mounts_content.lines() {
+            let parts: Vec<&str> = line.split_whitespace().collect();
+            if parts.len() >= 3 {
+                mounts.push(MountInfo {
+                    device: parts[0].to_string(),
+                    mount_point: parts[1].to_string(),
+                    fs_type: parts[2].to_string(),
+                });
+            }
+        }
+        
+        Ok(mounts)
+    }
+
+    /// Parse mergerfs source string to extract member paths
+    fn parse_mergerfs_sources(source: &str) -> Vec<String> {
+        // MergerFS source format: "/mnt/disk1:/mnt/disk2:/mnt/disk3"
+        source.split(':')
+            .map(|s| s.trim().to_string())
+            .filter(|s| !s.is_empty())
+            .collect()
+    }
+
+    /// Detect potential parity disks based on data member heuristics
+    fn detect_parity_disks(data_members: &[String]) -> Vec<String> {
+        let mut parity_disks = Vec::new();
+        
+        // Heuristic 1: Look for mount points with "parity" in the name
+        if let Ok(mounts) = Self::parse_proc_mounts() {
+            for mount in mounts {
+                if mount.mount_point.to_lowercase().contains("parity") && 
+                   (mount.fs_type == "xfs" || mount.fs_type == "ext4") {
+                    debug!("Detected parity disk by name: {}", mount.mount_point);
+                    parity_disks.push(mount.mount_point);
+                }
+            }
+        }
+        
+        // Heuristic 2: Look for sequential device pattern
+        // If data members are /mnt/disk1, /mnt/disk2, look for /mnt/disk* that's not in data
+        if parity_disks.is_empty() {
+            if let Some(pattern) = Self::extract_mount_pattern(data_members) {
+                if let Ok(mounts) = Self::parse_proc_mounts() {
+                    for mount in mounts {
+                        if mount.mount_point.starts_with(&pattern) && 
+                           !data_members.contains(&mount.mount_point) &&
+                           (mount.fs_type == "xfs" || mount.fs_type == "ext4") {
+                            debug!("Detected parity disk by pattern: {}", mount.mount_point);
+                            parity_disks.push(mount.mount_point);
+                        }
+                    }
+                }
+            }
+        }
+        
+        parity_disks
+    }
+
+    /// Extract common mount point pattern from data members
+    fn extract_mount_pattern(data_members: &[String]) -> Option<String> {
+        if data_members.is_empty() {
+            return None;
+        }
+        
+        // Find common prefix (e.g., "/mnt/disk" from "/mnt/disk1", "/mnt/disk2")
+        let first = &data_members[0];
+        if let Some(last_slash) = first.rfind('/') {
+            let base = &first[..last_slash + 1]; // Include the slash
+            
+            // Check if all members share this base
+            if data_members.iter().all(|member| member.starts_with(base)) {
+                return Some(base.to_string());
+            }
+        }
+        
+        None
+    }
+
+    /// Calculate disk temperature status using hysteresis thresholds
+    fn calculate_temperature_status(&self, metric_name: &str, temperature: f32, status_tracker: &mut StatusTracker) -> Status {
+        status_tracker.calculate_with_hysteresis(metric_name, temperature, &self.temperature_thresholds)
+    }
+
+
+    /// Get storage pools using auto-discovered topology or fallback to configuration
+    fn get_configured_storage_pools(&self) -> Result<Vec<StoragePool>> {
+        if let Some(ref topology) = self.storage_topology {
+            self.get_auto_discovered_storage_pools(topology)
+        } else {
+            self.get_legacy_configured_storage_pools()
+        }
+    }
+
+    /// Get storage pools from auto-discovered topology
+    fn get_auto_discovered_storage_pools(&self, topology: &StorageTopology) -> Result<Vec<StoragePool>> {
+        let mut storage_pools = Vec::new();
+
+        // Group single disks by physical drive for unified pool display
+        let grouped_disks = self.group_filesystems_by_physical_drive(&topology.single_disks)?;
+
+        // Process grouped single disks (each physical drive becomes a pool)
+        for (drive_name, filesystems) in grouped_disks {
+            // Create a unified pool for this physical drive
+            let pool = self.create_physical_drive_pool(&drive_name, &filesystems)?;
+            storage_pools.push(pool);
+        }
+
+        // IMPORTANT: Do not create individual filesystem pools when using auto-discovery
+        // All single disk filesystems should be grouped into physical drive pools above
+
+        // Process mergerfs pools (these remain as logical pools)
+        for pool_info in &topology.mergerfs_pools {
+            if let Ok((total_bytes, used_bytes)) = self.get_filesystem_info(&pool_info.mount_point) {
+                let available_bytes = total_bytes - used_bytes;
+                let usage_percent = if total_bytes > 0 {
+                    (used_bytes as f64 / total_bytes as f64) * 100.0
+                } else { 0.0 };
+
+                let size = self.bytes_to_human_readable(total_bytes);
+                let used = self.bytes_to_human_readable(used_bytes);
+                let available = self.bytes_to_human_readable(available_bytes);
+
+                // Collect all member and parity drives
+                let mut all_drives = Vec::new();
+                
+                // Add data member drives
+                for member in &pool_info.data_members {
+                    if let Some(devices) = self.detected_devices.get(member) {
+                        all_drives.extend(devices.clone());
+                    }
+                }
+                
+                // Add parity drives
+                for parity in &pool_info.parity_disks {
+                    if let Some(devices) = self.detected_devices.get(parity) {
+                        all_drives.extend(devices.clone());
+                    }
+                }
+
+                let underlying_drives = self.get_drive_info_for_devices(&all_drives)?;
+                
+                // Calculate pool health
+                let pool_health = self.calculate_mergerfs_pool_health(&pool_info.data_members, &pool_info.parity_disks, &underlying_drives);
+
+                // Generate pool name from mount point
+                let name = pool_info.mount_point.trim_start_matches('/').replace('/', "_");
+
+                storage_pools.push(StoragePool {
+                    name,
+                    mount_point: pool_info.mount_point.clone(),
+                    filesystem: "fuse.mergerfs".to_string(),
+                    pool_type: StoragePoolType::MergerfsPool {
+                        data_disks: pool_info.data_members.iter()
+                            .filter_map(|member| self.detected_devices.get(member).and_then(|devices| devices.first().cloned()))
+                            .collect(),
+                        parity_disks: pool_info.parity_disks.iter()
+                            .filter_map(|parity| self.detected_devices.get(parity).and_then(|devices| devices.first().cloned()))
+                            .collect(),
+                    },
+                    size,
+                    used,
+                    available,
+                    usage_percent: usage_percent as f32,
+                    underlying_drives,
+                    pool_health,
+                });
+
+                debug!("Auto-discovered mergerfs pool: {} with {} data + {} parity disks", 
+                       pool_info.mount_point, pool_info.data_members.len(), pool_info.parity_disks.len());
+            }
+        }
+
+        Ok(storage_pools)
+    }
+
+    /// Group filesystems by their backing physical drive
+    fn group_filesystems_by_physical_drive(&self, filesystems: &[MountInfo]) -> Result<std::collections::HashMap<String, Vec<MountInfo>>> {
+        let mut grouped = std::collections::HashMap::new();
+        
+        for fs in filesystems {
+            // Get the physical drive name for this mount point
+            if let Some(devices) = self.detected_devices.get(&fs.mount_point) {
+                if let Some(device_name) = devices.first() {
+                    // Extract base drive name from detected device
+                    let drive_name = Self::extract_base_device(device_name)
+                        .unwrap_or_else(|| device_name.clone());
+                    
+                    debug!("Grouping filesystem {} (device: {}) under drive: {}", 
+                           fs.mount_point, device_name, drive_name);
+                    
+                    grouped.entry(drive_name).or_insert_with(Vec::new).push(fs.clone());
+                }
+            }
+        }
+        
+        debug!("Filesystem grouping result: {} drives with filesystems: {:?}", 
+               grouped.len(), 
+               grouped.keys().collect::<Vec<_>>());
+        
+        Ok(grouped)
+    }
+
+    /// Create a physical drive pool containing multiple filesystems
+    fn create_physical_drive_pool(&self, drive_name: &str, filesystems: &[MountInfo]) -> Result<StoragePool> {
+        if filesystems.is_empty() {
+            return Err(anyhow::anyhow!("No filesystems for drive {}", drive_name));
+        }
+
+        // Calculate total usage across all filesystems on this drive
+        let mut total_capacity = 0u64;
+        let mut total_used = 0u64;
+        
+        for fs in filesystems {
+            if let Ok((capacity, used)) = self.get_filesystem_info(&fs.mount_point) {
+                total_capacity += capacity;
+                total_used += used;
+            }
+        }
+
+        let total_available = total_capacity.saturating_sub(total_used);
+        let usage_percent = if total_capacity > 0 {
+            (total_used as f64 / total_capacity as f64) * 100.0
+        } else { 0.0 };
+
+        // Get drive information for SMART data
+        let device_names = vec![drive_name.to_string()];
+        let underlying_drives = self.get_drive_info_for_devices(&device_names)?;
+
+        // Collect filesystem mount points for this drive
+        let filesystem_mount_points: Vec<String> = filesystems.iter()
+            .map(|fs| fs.mount_point.clone())
+            .collect();
+
+        Ok(StoragePool {
+            name: drive_name.to_string(),
+            mount_point: format!("(physical drive)"), // Special marker for physical drives
+            filesystem: "physical".to_string(),
+            pool_type: StoragePoolType::PhysicalDrive {
+                filesystems: filesystem_mount_points,
+            },
+            size: self.bytes_to_human_readable(total_capacity),
+            used: self.bytes_to_human_readable(total_used),
+            available: self.bytes_to_human_readable(total_available),
+            usage_percent: usage_percent as f32,
+            pool_health: if underlying_drives.iter().all(|d| d.health_status == "PASSED") {
+                PoolHealth::Healthy
+            } else {
+                PoolHealth::Critical
+            },
+            underlying_drives,
+        })
+    }
+
+    /// Calculate pool health specifically for mergerfs pools
+    fn calculate_mergerfs_pool_health(&self, data_members: &[String], parity_disks: &[String], drives: &[DriveInfo]) -> PoolHealth {
+        // Get device names for data and parity drives
+        let mut data_device_names = Vec::new();
+        let mut parity_device_names = Vec::new();
+        
+        for member in data_members {
+            if let Some(devices) = self.detected_devices.get(member) {
+                data_device_names.extend(devices.clone());
+            }
+        }
+        
+        for parity in parity_disks {
+            if let Some(devices) = self.detected_devices.get(parity) {
+                parity_device_names.extend(devices.clone());
+            }
+        }
+        
+        let failed_data = drives.iter()
+            .filter(|d| data_device_names.contains(&d.device) && d.health_status != "PASSED")
+            .count();
+        let failed_parity = drives.iter()
+            .filter(|d| parity_device_names.contains(&d.device) && d.health_status != "PASSED")
+            .count();
+        
+        match (failed_data, failed_parity) {
+            (0, 0) => PoolHealth::Healthy,
+            (1, 0) => PoolHealth::Degraded,  // Can recover with parity
+            (0, 1) => PoolHealth::Degraded,  // Lost parity protection
+            _ => PoolHealth::Critical,       // Multiple failures
+        }
+    }
+
+    /// Fallback to legacy configuration-based storage pools  
+    fn get_legacy_configured_storage_pools(&self) -> Result<Vec<StoragePool>> {
+        let mut storage_pools = Vec::new();
+        let mut processed_pools = std::collections::HashSet::new();
+
+        // Legacy implementation: use filesystem configuration
+        for fs_config in &self.config.filesystems {
+            if !fs_config.monitor {
+                continue;
+            }
+
+            let (pool_type, skip_in_single_mode) = self.determine_pool_type(&fs_config.storage_type);
+            
+            // Skip member disks if they're part of a pool
+            if skip_in_single_mode {
+                continue;
+            }
+
+            // Check if this pool was already processed (in case of multiple member disks)
+            let pool_key = match &pool_type {
+                StoragePoolType::MergerfsPool { .. } => {
+                    // For mergerfs pools, use the main mount point
+                    if fs_config.fs_type == "fuse.mergerfs" {
+                        fs_config.mount_point.clone()
+                    } else {
+                        continue; // Skip member disks
+                    }
+                }
+                _ => fs_config.mount_point.clone()
+            };
+
+            if processed_pools.contains(&pool_key) {
+                continue;
+            }
+            processed_pools.insert(pool_key.clone());
+
+            // Get filesystem stats for the mount point
+            match self.get_filesystem_info(&fs_config.mount_point) {
+                Ok((total_bytes, used_bytes)) => {
+                    let available_bytes = total_bytes - used_bytes;
+                    let usage_percent = if total_bytes > 0 {
+                        (used_bytes as f64 / total_bytes as f64) * 100.0
+                    } else { 0.0 };
+
+                    // Convert bytes to human-readable format
+                    let size = self.bytes_to_human_readable(total_bytes);
+                    let used = self.bytes_to_human_readable(used_bytes);
+                    let available = self.bytes_to_human_readable(available_bytes);
+
+                    // Get underlying drives based on pool type
+                    let underlying_drives = self.get_pool_drives(&pool_type, &fs_config.mount_point)?;
+                    
+                    // Calculate pool health
+                    let pool_health = self.calculate_pool_health(&pool_type, &underlying_drives);
+                    let drive_count = underlying_drives.len();
+
+                    storage_pools.push(StoragePool {
+                        name: fs_config.name.clone(),
+                        mount_point: fs_config.mount_point.clone(),
+                        filesystem: fs_config.fs_type.clone(),
+                        pool_type: pool_type.clone(),
+                        size,
+                        used,
+                        available,
+                        usage_percent: usage_percent as f32,
+                        underlying_drives,
+                        pool_health,
+                    });
+
+                    debug!(
+                        "Legacy configured storage pool '{}' ({:?}) at {} with {} drives, health: {:?}",
+                        fs_config.name, pool_type, fs_config.mount_point, drive_count, pool_health
+                    );
+                }
+                Err(e) => {
+                    debug!(
+                        "Failed to get filesystem info for storage pool '{}': {}",
+                        fs_config.name, e
+                    );
+                }
+            }
+        }
+
+        Ok(storage_pools)
+    }
+
+    /// Determine the storage pool type from configuration
+    fn determine_pool_type(&self, storage_type: &str) -> (StoragePoolType, bool) {
+        match storage_type {
+            "single" => (StoragePoolType::Single, false),
+            "mergerfs_pool" | "mergerfs" => {
+                // Find associated member disks
+                let data_disks = self.find_pool_member_disks("mergerfs_member");
+                let parity_disks = self.find_pool_member_disks("parity");
+                (StoragePoolType::MergerfsPool { data_disks, parity_disks }, false)
+            }
+            "mergerfs_member" => (StoragePoolType::Single, true), // Skip, part of pool
+            "parity" => (StoragePoolType::Single, true), // Skip, part of pool  
+            "raid1" | "raid5" | "raid6" => {
+                let member_disks = self.find_pool_member_disks(&format!("{}_member", storage_type));
+                (StoragePoolType::RaidArray { 
+                    level: storage_type.to_uppercase(), 
+                    member_disks, 
+                    spare_disks: Vec::new() 
+                }, false)
+            }
+            _ => (StoragePoolType::Single, false) // Default to single
+        }
+    }
+
+    /// Find member disks for a specific storage type
+    fn find_pool_member_disks(&self, member_type: &str) -> Vec<String> {
+        let mut member_disks = Vec::new();
+        
+        for fs_config in &self.config.filesystems {
+            if fs_config.storage_type == member_type && fs_config.monitor {
+                // Get device names for this mount point
+                if let Some(devices) = self.detected_devices.get(&fs_config.mount_point) {
+                    member_disks.extend(devices.clone());
+                }
+            }
+        }
+        
+        member_disks
+    }
+
+    /// Get drive information for a specific pool type
+    fn get_pool_drives(&self, pool_type: &StoragePoolType, mount_point: &str) -> Result<Vec<DriveInfo>> {
+        match pool_type {
+            StoragePoolType::Single => {
+                // Single disk - use detected devices for this mount point
+                let device_names = self.detected_devices.get(mount_point).cloned().unwrap_or_default();
+                self.get_drive_info_for_devices(&device_names)
+            }
+            StoragePoolType::PhysicalDrive { .. } => {
+                // Physical drive - get drive info for the drive directly (mount_point not used)
+                let device_names = vec![mount_point.to_string()];
+                self.get_drive_info_for_devices(&device_names)
+            }
+            StoragePoolType::MergerfsPool { data_disks, parity_disks } => {
+                // Mergerfs pool - collect all member drives
+                let mut all_disks = data_disks.clone();
+                all_disks.extend(parity_disks.clone());
+                self.get_drive_info_for_devices(&all_disks)
+            }
+            StoragePoolType::RaidArray { member_disks, spare_disks, .. } => {
+                // RAID array - collect member and spare drives
+                let mut all_disks = member_disks.clone();
+                all_disks.extend(spare_disks.clone());
+                self.get_drive_info_for_devices(&all_disks)
+            }
+            StoragePoolType::ZfsPool { .. } => {
+                // ZFS pool - use detected devices (future implementation)
+                let device_names = self.detected_devices.get(mount_point).cloned().unwrap_or_default();
+                self.get_drive_info_for_devices(&device_names)
+            }
+        }
+    }
+
+    /// Calculate pool health based on drive status and pool type
+    fn calculate_pool_health(&self, pool_type: &StoragePoolType, drives: &[DriveInfo]) -> PoolHealth {
+        match pool_type {
+            StoragePoolType::Single => {
+                // Single disk - health is just the drive health
+                if drives.is_empty() {
+                    PoolHealth::Unknown
+                } else if drives.iter().all(|d| d.health_status == "PASSED") {
+                    PoolHealth::Healthy
+                } else {
+                    PoolHealth::Critical
+                }
+            }
+            StoragePoolType::PhysicalDrive { .. } => {
+                // Physical drive - health is just the drive health (similar to Single)
+                if drives.is_empty() {
+                    PoolHealth::Unknown
+                } else if drives.iter().all(|d| d.health_status == "PASSED") {
+                    PoolHealth::Healthy
+                } else {
+                    PoolHealth::Critical
+                }
+            }
+            StoragePoolType::MergerfsPool { data_disks, parity_disks } => {
+                let failed_data = drives.iter()
+                    .filter(|d| data_disks.contains(&d.device) && d.health_status != "PASSED")
+                    .count();
+                let failed_parity = drives.iter()
+                    .filter(|d| parity_disks.contains(&d.device) && d.health_status != "PASSED")
+                    .count();
+                
+                match (failed_data, failed_parity) {
+                    (0, 0) => PoolHealth::Healthy,
+                    (1, 0) => PoolHealth::Degraded,  // Can recover with parity
+                    (0, 1) => PoolHealth::Degraded,  // Lost parity protection
+                    _ => PoolHealth::Critical,       // Multiple failures
+                }
+            }
+            StoragePoolType::RaidArray { level, .. } => {
+                let failed_drives = drives.iter().filter(|d| d.health_status != "PASSED").count();
+                
+                // Basic RAID health logic (can be enhanced per RAID level)
+                match failed_drives {
+                    0 => PoolHealth::Healthy,
+                    1 if level.contains('1') || level.contains('5') || level.contains('6') => PoolHealth::Degraded,
+                    _ => PoolHealth::Critical,
+                }
+            }
+            StoragePoolType::ZfsPool { .. } => {
+                // ZFS health would require zpool status parsing (future)
+                if drives.iter().all(|d| d.health_status == "PASSED") {
+                    PoolHealth::Healthy
+                } else {
+                    PoolHealth::Degraded
+                }
+            }
+        }
+    }
+
+    /// Get drive information for a list of device names
+    fn get_drive_info_for_devices(&self, device_names: &[String]) -> Result<Vec<DriveInfo>> {
+        let mut drives = Vec::new();
+        
+        for device_name in device_names {
+            let device_path = format!("/dev/{}", device_name);
+            
+            // Get SMART data for this drive
+            let (health_status, temperature, wear_level) = self.get_smart_data(&device_path);
+            
+            drives.push(DriveInfo {
+                device: device_name.clone(),
+                health_status: health_status.clone(),
+                temperature,
+                wear_level,
+            });
+            
+            debug!(
+                "Drive info for {}: health={}, temp={:?}°C, wear={:?}%",
+                device_name, health_status, temperature, wear_level
+            );
+        }
+        
+        Ok(drives)
+    }
+
+    /// Get SMART data for a drive (health, temperature, wear level)
+    fn get_smart_data(&self, device_path: &str) -> (String, Option<f32>, Option<f32>) {
+        // Try to get SMART data using smartctl
+        let output = Command::new("sudo")
+            .arg("smartctl")
+            .arg("-a")
+            .arg(device_path)
+            .output();
+            
+        match output {
+            Ok(result) if result.status.success() => {
+                let stdout = String::from_utf8_lossy(&result.stdout);
+                
+                // Parse health status
+                let health = if stdout.contains("PASSED") {
+                    "PASSED".to_string()
+                } else if stdout.contains("FAILED") {
+                    "FAILED".to_string()
+                } else {
+                    "UNKNOWN".to_string()
+                };
+                
+                // Parse temperature (look for various temperature indicators)
+                let temperature = self.parse_temperature_from_smart(&stdout);
+                
+                // Parse wear level (for SSDs)
+                let wear_level = self.parse_wear_level_from_smart(&stdout);
+                
+                (health, temperature, wear_level)
+            }
+            _ => {
+                debug!("Failed to get SMART data for {}", device_path);
+                ("UNKNOWN".to_string(), None, None)
+            }
+        }
+    }
+
+    /// Parse temperature from SMART output
+    fn parse_temperature_from_smart(&self, smart_output: &str) -> Option<f32> {
+        for line in smart_output.lines() {
+            // Look for temperature in various formats
+            if line.contains("Temperature_Celsius") || line.contains("Temperature") {
+                let parts: Vec<&str> = line.split_whitespace().collect();
+                if parts.len() >= 10 {
+                    if let Ok(temp) = parts[9].parse::<f32>() {
+                        return Some(temp);
+                    }
+                }
+            }
+            // NVMe drives might show temperature differently
+            if line.contains("temperature:") {
+                if let Some(temp_part) = line.split("temperature:").nth(1) {
+                    if let Some(temp_str) = temp_part.split_whitespace().next() {
+                        if let Ok(temp) = temp_str.parse::<f32>() {
+                            return Some(temp);
+                        }
+                    }
+                }
+            }
+        }
+        None
+    }
+
+    /// Parse wear level from SMART output (SSD wear leveling)
+    /// Supports both NVMe and SATA SSD wear indicators
+    fn parse_wear_level_from_smart(&self, smart_output: &str) -> Option<f32> {
+        for line in smart_output.lines() {
+            let line = line.trim();
+            
+            // NVMe drives - direct percentage used
+            if line.contains("Percentage Used:") {
+                if let Some(wear_part) = line.split("Percentage Used:").nth(1) {
+                    if let Some(wear_str) = wear_part.split('%').next() {
+                        if let Ok(wear) = wear_str.trim().parse::<f32>() {
+                            return Some(wear);
+                        }
+                    }
+                }
+            }
+            
+            // SATA SSD attributes - parse SMART table format
+            // Format: ID ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
+            let parts: Vec<&str> = line.split_whitespace().collect();
+            if parts.len() >= 10 {
+                // SSD Life Left / Percent Lifetime Remaining (higher = less wear)
+                if line.contains("SSD_Life_Left") || line.contains("Percent_Lifetime_Remain") {
+                    if let Ok(remaining) = parts[3].parse::<f32>() { // VALUE column
+                        return Some(100.0 - remaining); // Convert remaining to used
+                    }
+                }
+                
+                // Media Wearout Indicator (lower = more wear, normalize to 0-100)
+                if line.contains("Media_Wearout_Indicator") {
+                    if let Ok(remaining) = parts[3].parse::<f32>() { // VALUE column
+                        return Some(100.0 - remaining); // Convert remaining to used
+                    }
+                }
+                
+                // Wear Leveling Count (higher = less wear, but varies by manufacturer)
+                if line.contains("Wear_Leveling_Count") {
+                    if let Ok(wear_count) = parts[3].parse::<f32>() { // VALUE column
+                        // Most SSDs: 100 = new, decreases with wear
+                        if wear_count <= 100.0 {
+                            return Some(100.0 - wear_count);
+                        }
+                    }
+                }
+                
+                // Total LBAs Written - calculate against typical endurance if available
+                // This is more complex and manufacturer-specific, so we skip for now
+            }
+        }
+        None
+    }
+
+    /// Convert bytes to human-readable format
+    fn bytes_to_human_readable(&self, bytes: u64) -> String {
+        const UNITS: &[&str] = &["B", "K", "M", "G", "T"];
+        let mut size = bytes as f64;
+        let mut unit_index = 0;
+
+        while size >= 1024.0 && unit_index < UNITS.len() - 1 {
+            size /= 1024.0;
+            unit_index += 1;
+        }
+
+        if unit_index == 0 {
+            format!("{:.0}{}", size, UNITS[unit_index])
+        } else {
+            format!("{:.1}{}", size, UNITS[unit_index])
+        }
+    }
+
+    /// Convert bytes to gigabytes
+    fn bytes_to_gb(&self, bytes: u64) -> f32 {
+        bytes as f32 / (1024.0 * 1024.0 * 1024.0)
+    }
+
+    /// Detect device backing a mount point using lsblk (static version for startup)
+    fn detect_device_for_mount_point_static(mount_point: &str) -> Result<Vec<String>> {
+        let output = Command::new("lsblk")
+            .args(&["-n", "-o", "NAME,MOUNTPOINT"])
+            .output()?;
+        
+        if !output.status.success() {
+            return Ok(Vec::new());
+        }
+        
+        let output_str = String::from_utf8_lossy(&output.stdout);
+        
+        for line in output_str.lines() {
+            let parts: Vec<&str> = line.split_whitespace().collect();
+            if parts.len() >= 2 && parts[1] == mount_point {
+                // Remove tree symbols and extract device name (e.g., "├─nvme0n1p2" -> "nvme0n1p2")
+                let device_name = parts[0]
+                    .trim_start_matches('├')
+                    .trim_start_matches('└')
+                    .trim_start_matches('─')
+                    .trim();
+                
+                // Extract base device name (e.g., "nvme0n1p2" -> "nvme0n1")
+                if let Some(base_device) = Self::extract_base_device(device_name) {
+                    return Ok(vec![base_device]);
+                }
+            }
+        }
+        
+        Ok(Vec::new())
+    }
+
+    /// Extract base device name from partition (e.g., "nvme0n1p2" -> "nvme0n1", "sda1" -> "sda")
+    fn extract_base_device(device_name: &str) -> Option<String> {
+        // Handle NVMe devices (nvme0n1p1 -> nvme0n1)
+        if device_name.starts_with("nvme") {
+            if let Some(p_pos) = device_name.find('p') {
+                return Some(device_name[..p_pos].to_string());
+            }
+        }
+        
+        // Handle traditional devices (sda1 -> sda)
+        if device_name.len() > 1 {
+            let chars: Vec<char> = device_name.chars().collect();
+            let mut end_idx = chars.len();
+            
+            // Find where the device name ends and partition number begins
+            for (i, &c) in chars.iter().enumerate().rev() {
+                if !c.is_ascii_digit() {
+                    end_idx = i + 1;
+                    break;
+                }
+            }
+            
+            if end_idx > 0 && end_idx < chars.len() {
+                return Some(chars[..end_idx].iter().collect());
+            }
+        }
+        
+        // If no partition detected, return as-is
+        Some(device_name.to_string())
+    }
+
+
+    /// Get filesystem info using df command
+    fn get_filesystem_info(&self, path: &str) -> Result<(u64, u64)> {
+        let output = Command::new("df")
+            .arg("--block-size=1")
+            .arg(path)
+            .output()?;
+
+        if !output.status.success() {
+            return Err(anyhow::anyhow!("df command failed for {}", path));
+        }
+
+        let output_str = String::from_utf8(output.stdout)?;
+        let lines: Vec<&str> = output_str.lines().collect();
+
+        if lines.len() < 2 {
+            return Err(anyhow::anyhow!("Unexpected df output format"));
+        }
+
+        let fields: Vec<&str> = lines[1].split_whitespace().collect();
+        if fields.len() < 4 {
+            return Err(anyhow::anyhow!("Unexpected df fields count"));
+        }
+
+        let total_bytes = fields[1].parse::<u64>()?;
+        let used_bytes = fields[2].parse::<u64>()?;
+
+        Ok((total_bytes, used_bytes))
+    }
+
+
+    /// Parse size string (e.g., "120G", "45M") to GB value
+    fn parse_size_to_gb(&self, size_str: &str) -> f32 {
+        let size_str = size_str.trim();
+        if size_str.is_empty() || size_str == "-" {
+            return 0.0;
+        }
+
+        // Extract numeric part and unit
+        let (num_str, unit) = if let Some(last_char) = size_str.chars().last() {
+            if last_char.is_alphabetic() {
+                let num_part = &size_str[..size_str.len() - 1];
+                let unit_part = &size_str[size_str.len() - 1..];
+                (num_part, unit_part)
+            } else {
+                (size_str, "")
+            }
+        } else {
+            (size_str, "")
+        };
+
+        let number: f32 = num_str.parse().unwrap_or(0.0);
+
+        match unit.to_uppercase().as_str() {
+            "T" | "TB" => number * 1024.0,
+            "G" | "GB" => number,
+            "M" | "MB" => number / 1024.0,
+            "K" | "KB" => number / (1024.0 * 1024.0),
+            "B" | "" => number / (1024.0 * 1024.0 * 1024.0),
+            _ => number, // Assume GB if unknown unit
+        }
+    }
+}
+
+#[async_trait]
+impl Collector for DiskCollector {
+
+    async fn collect(&self, status_tracker: &mut StatusTracker) -> Result<Vec<Metric>, CollectorError> {
+        let start_time = Instant::now();
+        debug!("Collecting storage pool and individual drive metrics");
+
+        let mut metrics = Vec::new();
+
+        // Get configured storage pools with individual drive data
+        let storage_pools = match self.get_configured_storage_pools() {
+            Ok(pools) => {
+                debug!("Found {} storage pools", pools.len());
+                pools
+            }
+            Err(e) => {
+                debug!("Failed to get storage pools: {}", e);
+                Vec::new()
+            }
+        };
+
+        // Generate metrics for each storage pool and its underlying drives
+        for storage_pool in &storage_pools {
+            let timestamp = chrono::Utc::now().timestamp() as u64;
+
+            // Storage pool overall metrics
+            let pool_name = &storage_pool.name;
+            
+            // Parse size strings to get actual values for calculations
+            let size_gb = self.parse_size_to_gb(&storage_pool.size);
+            let used_gb = self.parse_size_to_gb(&storage_pool.used);
+            let avail_gb = self.parse_size_to_gb(&storage_pool.available);
+
+            // Calculate status based on configured thresholds and pool health
+            let usage_status = if storage_pool.usage_percent >= self.config.usage_critical_percent {
+                Status::Critical
+            } else if storage_pool.usage_percent >= self.config.usage_warning_percent {
+                Status::Warning
+            } else {
+                Status::Ok
+            };
+
+            let pool_status = match storage_pool.pool_health {
+                PoolHealth::Critical => Status::Critical,
+                PoolHealth::Degraded => Status::Warning,
+                PoolHealth::Rebuilding => Status::Warning,
+                PoolHealth::Healthy => usage_status,
+                PoolHealth::Unknown => Status::Unknown,
+            };
+
+            // Storage pool info metrics
+            metrics.push(Metric {
+                name: format!("disk_{}_mount_point", pool_name),
+                value: MetricValue::String(storage_pool.mount_point.clone()),
+                unit: None,
+                description: Some(format!("Mount: {}", storage_pool.mount_point)),
+                status: Status::Ok,
+                timestamp,
+            });
+
+            metrics.push(Metric {
+                name: format!("disk_{}_filesystem", pool_name),
+                value: MetricValue::String(storage_pool.filesystem.clone()),
+                unit: None,
+                description: Some(format!("FS: {}", storage_pool.filesystem)),
+                status: Status::Ok,
+                timestamp,
+            });
+
+            // Enhanced pool type information
+            let pool_type_str = match &storage_pool.pool_type {
+                StoragePoolType::Single => "single".to_string(),
+                StoragePoolType::PhysicalDrive { filesystems } => {
+                    format!("drive ({})", filesystems.len())
+                }
+                StoragePoolType::MergerfsPool { data_disks, parity_disks } => {
+                    format!("mergerfs ({}+{})", data_disks.len(), parity_disks.len())
+                }
+                StoragePoolType::RaidArray { level, member_disks, spare_disks } => {
+                    format!("{} ({}+{})", level, member_disks.len(), spare_disks.len())
+                }
+                StoragePoolType::ZfsPool { pool_name, .. } => {
+                    format!("zfs ({})", pool_name)
+                }
+            };
+
+            metrics.push(Metric {
+                name: format!("disk_{}_pool_type", pool_name),
+                value: MetricValue::String(pool_type_str.clone()),
+                unit: None,
+                description: Some(format!("Type: {}", pool_type_str)),
+                status: Status::Ok,
+                timestamp,
+            });
+
+            // Pool health status
+            let health_str = match storage_pool.pool_health {
+                PoolHealth::Healthy => "healthy",
+                PoolHealth::Degraded => "degraded", 
+                PoolHealth::Critical => "critical",
+                PoolHealth::Rebuilding => "rebuilding",
+                PoolHealth::Unknown => "unknown",
+            };
+
+            metrics.push(Metric {
+                name: format!("disk_{}_pool_health", pool_name),
+                value: MetricValue::String(health_str.to_string()),
+                unit: None,
+                description: Some(format!("Health: {}", health_str)),
+                status: pool_status,
+                timestamp,
+            });
+
+            // Storage pool size metrics
+            metrics.push(Metric {
+                name: format!("disk_{}_total_gb", pool_name),
+                value: MetricValue::Float(size_gb),
+                unit: Some("GB".to_string()),
+                description: Some(format!("Total: {}", storage_pool.size)),
+                status: Status::Ok,
+                timestamp,
+            });
+
+            metrics.push(Metric {
+                name: format!("disk_{}_used_gb", pool_name),
+                value: MetricValue::Float(used_gb),
+                unit: Some("GB".to_string()),
+                description: Some(format!("Used: {}", storage_pool.used)),
+                status: pool_status,
+                timestamp,
+            });
+
+            metrics.push(Metric {
+                name: format!("disk_{}_available_gb", pool_name),
+                value: MetricValue::Float(avail_gb),
+                unit: Some("GB".to_string()),
+                description: Some(format!("Available: {}", storage_pool.available)),
+                status: Status::Ok,
+                timestamp,
+            });
+
+            metrics.push(Metric {
+                name: format!("disk_{}_usage_percent", pool_name),
+                value: MetricValue::Float(storage_pool.usage_percent),
+                unit: Some("%".to_string()),
+                description: Some(format!("Usage: {:.1}%", storage_pool.usage_percent)),
+                status: pool_status,
+                timestamp,
+            });
+
+            // Individual drive metrics for this storage pool
+            for drive in &storage_pool.underlying_drives {
+                // Drive health status
+                metrics.push(Metric {
+                    name: format!("disk_{}_{}_health", pool_name, drive.device),
+                    value: MetricValue::String(drive.health_status.clone()),
+                    unit: None,
+                    description: Some(format!("{}: {}", drive.device, drive.health_status)),
+                    status: if drive.health_status == "PASSED" { Status::Ok } 
+                            else if drive.health_status == "FAILED" { Status::Critical }
+                            else { Status::Unknown },
+                    timestamp,
+                });
+
+                // Drive temperature
+                if let Some(temp) = drive.temperature {
+                    let temp_status = self.calculate_temperature_status(
+                        &format!("disk_{}_{}_temperature", pool_name, drive.device),
+                        temp,
+                        status_tracker
+                    );
+                    
+                    metrics.push(Metric {
+                        name: format!("disk_{}_{}_temperature", pool_name, drive.device),
+                        value: MetricValue::Float(temp),
+                        unit: Some("°C".to_string()),
+                        description: Some(format!("{}: {:.0}°C", drive.device, temp)),
+                        status: temp_status,
+                        timestamp,
+                    });
+                }
+
+                // Drive wear level (for SSDs)
+                if let Some(wear) = drive.wear_level {
+                    let wear_status = if wear >= self.config.wear_critical_percent { Status::Critical }
+                                     else if wear >= self.config.wear_warning_percent { Status::Warning }
+                                     else { Status::Ok };
+                    
+                    metrics.push(Metric {
+                        name: format!("disk_{}_{}_wear_percent", pool_name, drive.device),
+                        value: MetricValue::Float(wear),
+                        unit: Some("%".to_string()),
+                        description: Some(format!("{}: {:.0}% wear", drive.device, wear)),
+                        status: wear_status,
+                        timestamp,
+                    });
+                }
+            }
+
+            // Individual filesystem metrics for PhysicalDrive pools
+            if let StoragePoolType::PhysicalDrive { filesystems } = &storage_pool.pool_type {
+                for filesystem_mount in filesystems {
+                    if let Ok((total_bytes, used_bytes)) = self.get_filesystem_info(filesystem_mount) {
+                        let available_bytes = total_bytes - used_bytes;
+                        let usage_percent = if total_bytes > 0 {
+                            (used_bytes as f64 / total_bytes as f64) * 100.0
+                        } else { 0.0 };
+
+                        let filesystem_name = if filesystem_mount == "/" {
+                            "root".to_string()
+                        } else {
+                            filesystem_mount.trim_start_matches('/').replace('/', "_")
+                        };
+
+                        // Calculate filesystem status based on usage
+                        let fs_status = if usage_percent >= self.config.usage_critical_percent as f64 {
+                            Status::Critical
+                        } else if usage_percent >= self.config.usage_warning_percent as f64 {
+                            Status::Warning
+                        } else {
+                            Status::Ok
+                        };
+
+                        // Filesystem usage metrics
+                        metrics.push(Metric {
+                            name: format!("disk_{}_fs_{}_usage_percent", pool_name, filesystem_name),
+                            value: MetricValue::Float(usage_percent as f32),
+                            unit: Some("%".to_string()),
+                            description: Some(format!("{}: {:.0}%", filesystem_mount, usage_percent)),
+                            status: fs_status.clone(),
+                            timestamp,
+                        });
+
+                        metrics.push(Metric {
+                            name: format!("disk_{}_fs_{}_used_gb", pool_name, filesystem_name),
+                            value: MetricValue::Float(self.bytes_to_gb(used_bytes)),
+                            unit: Some("GB".to_string()),
+                            description: Some(format!("{}: {}GB used", filesystem_mount, self.bytes_to_human_readable(used_bytes))),
+                            status: Status::Ok,
+                            timestamp,
+                        });
+
+                        metrics.push(Metric {
+                            name: format!("disk_{}_fs_{}_total_gb", pool_name, filesystem_name),
+                            value: MetricValue::Float(self.bytes_to_gb(total_bytes)),
+                            unit: Some("GB".to_string()),
+                            description: Some(format!("{}: {}GB total", filesystem_mount, self.bytes_to_human_readable(total_bytes))),
+                            status: Status::Ok,
+                            timestamp,
+                        });
+
+                        metrics.push(Metric {
+                            name: format!("disk_{}_fs_{}_available_gb", pool_name, filesystem_name),
+                            value: MetricValue::Float(self.bytes_to_gb(available_bytes)),
+                            unit: Some("GB".to_string()),
+                            description: Some(format!("{}: {}GB available", filesystem_mount, self.bytes_to_human_readable(available_bytes))),
+                            status: Status::Ok,
+                            timestamp,
+                        });
+
+                        metrics.push(Metric {
+                            name: format!("disk_{}_fs_{}_mount_point", pool_name, filesystem_name),
+                            value: MetricValue::String(filesystem_mount.clone()),
+                            unit: None,
+                            description: Some(format!("Mount: {}", filesystem_mount)),
+                            status: Status::Ok,
+                            timestamp,
+                        });
+                    }
+                }
+            }
+        }
+
+        // Add storage pool count metric
+        metrics.push(Metric {
+            name: "disk_count".to_string(),
+            value: MetricValue::Integer(storage_pools.len() as i64),
+            unit: None,
+            description: Some(format!("Total storage pools: {}", storage_pools.len())),
+            status: Status::Ok,
+            timestamp: chrono::Utc::now().timestamp() as u64,
+        });
+
+
+        let collection_time = start_time.elapsed();
+        debug!(
+            "Multi-disk collection completed in {:?} with {} metrics",
+            collection_time,
+            metrics.len()
+        );
+
+        Ok(metrics)
+    }
+}
--- a/dashboard/Cargo.toml
+++ b/dashboard/Cargo.toml
@@ -1,6 +1,6 @@
 [package]
 name = "cm-dashboard"
-version = "0.1.82"
+version = "0.1.123"
 edition = "2021"

 [dependencies]
--- a/dashboard/src/config/mod.rs
+++ b/dashboard/src/config/mod.rs
@@ -55,8 +55,8 @@ pub struct SystemConfig {
 #[derive(Debug, Clone, Serialize, Deserialize)]
 pub struct SshConfig {
    pub rebuild_user: String,
-    pub rebuild_alias: String,
-    pub backup_alias: String,
+    pub rebuild_cmd: String,
+    pub service_manage_cmd: String,
 }

 /// Service log file configuration per host
--- a/dashboard/src/ui/mod.rs
+++ b/dashboard/src/ui/mod.rs
@@ -220,12 +220,12 @@ impl TuiApp {
                        let connection_ip = self.get_connection_ip(&hostname);
                        // Create command that shows logo, rebuilds, and waits for user input
                        let logo_and_rebuild = format!(
-                            "bash -c 'cat << \"EOF\"\nNixOS System Rebuild\nTarget: {} ({})\n\nEOF\nssh -tt {}@{} \"bash -ic {}\"\necho\necho \"========================================\"\necho \"Rebuild completed. Press any key to close...\"\necho \"========================================\"\nread -n 1 -s\nexit'",
+                            "echo 'Rebuilding system: {} ({})' && ssh -tt {}@{} \"bash -ic '{}'\"",
                            hostname,
                            connection_ip,
                            self.config.ssh.rebuild_user,
                            connection_ip,
-                            self.config.ssh.rebuild_alias
+                            self.config.ssh.rebuild_cmd
                        );
                        
                        std::process::Command::new("tmux")
@@ -244,12 +244,12 @@ impl TuiApp {
                        let connection_ip = self.get_connection_ip(&hostname);
                        // Create command that shows logo, runs backup, and waits for user input
                        let logo_and_backup = format!(
-                            "bash -c 'cat << \"EOF\"\nBackup Operation\nTarget: {} ({})\n\nEOF\nssh -tt {}@{} \"bash -ic {}\"\necho\necho \"========================================\"\necho \"Backup completed. Press any key to close...\"\necho \"========================================\"\nread -n 1 -s\nexit'",
+                            "echo 'Running backup: {} ({})' && ssh -tt {}@{} \"bash -ic '{}'\"",
                            hostname,
                            connection_ip,
                            self.config.ssh.rebuild_user,
                            connection_ip,
-                            self.config.ssh.backup_alias
+                            format!("{} start borgbackup", self.config.ssh.service_manage_cmd)
                        );
                        
                        std::process::Command::new("tmux")
@@ -267,13 +267,12 @@ impl TuiApp {
                    if let (Some(service_name), Some(hostname)) = (self.get_selected_service(), self.current_host.clone()) {
                        let connection_ip = self.get_connection_ip(&hostname);
                        let service_start_command = format!(
-                            "bash -c 'cat << \"EOF\"\nService Start: {}\nTarget: {} ({})\n\nEOF\nssh -tt {}@{} \"echo \\\"Starting service and following logs (Ctrl+C to stop):\\\" && echo \\\"========================================\\\" && sudo systemctl start {} & sudo journalctl -fu {} --since=\\\"1 second ago\\\" --no-pager\"\necho\necho \"========================================\"\necho \"Operation completed. Press any key to close...\"\necho \"========================================\"\nread -n 1 -s\nexit'",
+                            "echo 'Starting service: {} on {}' && ssh -tt {}@{} \"bash -ic '{} start {}'\"",
                            service_name,
                            hostname,
-                            connection_ip,
                            self.config.ssh.rebuild_user,
                            connection_ip,
-                            service_name,
+                            self.config.ssh.service_manage_cmd,
                            service_name
                        );
                        
@@ -292,14 +291,12 @@ impl TuiApp {
                    if let (Some(service_name), Some(hostname)) = (self.get_selected_service(), self.current_host.clone()) {
                        let connection_ip = self.get_connection_ip(&hostname);
                        let service_stop_command = format!(
-                            "bash -c 'cat << \"EOF\"\nService Stop: {}.service\nTarget: {} ({})\n\nEOF\nssh -tt {}@{} \"echo \\\"Stopping service...\\\" && sudo systemctl stop {}.service && echo \\\"Service stopped! Final logs:\\\" && echo \\\"========================================\\\" && sudo journalctl -u {}.service --no-pager -n 10 && echo \\\"========================================\\\" && sudo systemctl status {}.service --no-pager -l\"\necho\necho \"========================================\"\necho \"Operation completed. Press any key to close...\"\necho \"========================================\"\nread -n 1 -s\nexit'",
+                            "echo 'Stopping service: {} on {}' && ssh -tt {}@{} \"bash -ic '{} stop {}'\"",
                            service_name,
                            hostname,
-                            connection_ip,
                            self.config.ssh.rebuild_user,
                            connection_ip,
-                            service_name,
-                            service_name,
+                            self.config.ssh.service_manage_cmd,
                            service_name
                        );
                        
@@ -313,14 +310,15 @@ impl TuiApp {
                            .ok(); // Ignore errors, tmux will handle them
                    }
                }
-                KeyCode::Char('J') => {
-                    // Show service logs via journalctl in tmux split window
+                KeyCode::Char('L') => {
+                    // Show service logs via service-manage script in tmux split window
                    if let (Some(service_name), Some(hostname)) = (self.get_selected_service(), self.current_host.clone()) {
                        let connection_ip = self.get_connection_ip(&hostname);
-                        let journalctl_command = format!(
-                            "bash -c \"ssh -tt {}@{} 'sudo journalctl -u {}.service -f --no-pager -n 50'; exit\"",
+                        let logs_command = format!(
+                            "ssh -tt {}@{} '{} logs {}'",
                            self.config.ssh.rebuild_user,
                            connection_ip,
+                            self.config.ssh.service_manage_cmd,
                            service_name
                        );
                        
@@ -329,37 +327,11 @@ impl TuiApp {
                            .arg("-v")
                            .arg("-p")
                            .arg("30")
-                            .arg(&journalctl_command)
+                            .arg(&logs_command)
                            .spawn()
                            .ok(); // Ignore errors, tmux will handle them
                    }
                }
-                KeyCode::Char('L') => {
-                    // Show custom service log file in tmux split window
-                    if let (Some(service_name), Some(hostname)) = (self.get_selected_service(), self.current_host.clone()) {
-                        // Check if this service has a custom log file configured
-                        if let Some(host_logs) = self.config.service_logs.get(&hostname) {
-                            if let Some(log_config) = host_logs.iter().find(|config| config.service_name == service_name) {
-                                let connection_ip = self.get_connection_ip(&hostname);
-                                let tail_command = format!(
-                                    "bash -c \"ssh -tt {}@{} 'sudo tail -n 50 -f {}'; exit\"",
-                                    self.config.ssh.rebuild_user,
-                                    connection_ip,
-                                    log_config.log_file_path
-                                );
-                                
-                                std::process::Command::new("tmux")
-                                    .arg("split-window")
-                                    .arg("-v")
-                                    .arg("-p")
-                                    .arg("30")
-                                    .arg(&tail_command)
-                                    .spawn()
-                                    .ok(); // Ignore errors, tmux will handle them
-                            }
-                        }
-                    }
-                }
                KeyCode::Char('w') => {
                    // Wake on LAN for offline hosts
                    if let Some(hostname) = self.current_host.clone() {
@@ -392,7 +364,8 @@ impl TuiApp {
                    if let Some(hostname) = self.current_host.clone() {
                        let connection_ip = self.get_connection_ip(&hostname);
                        let ssh_command = format!(
-                            "ssh -tt {}@{}",
+                            "echo 'Opening SSH terminal to: {}' && ssh -tt {}@{}",
+                            hostname,
                            self.config.ssh.rebuild_user,
                            connection_ip
                        );
@@ -616,12 +589,13 @@ impl TuiApp {
        // Split the title bar into left and right sections
        let chunks = Layout::default()
            .direction(Direction::Horizontal)
-            .constraints([Constraint::Length(15), Constraint::Min(0)])
+            .constraints([Constraint::Length(22), Constraint::Min(0)])
            .split(area);

-        // Left side: "cm-dashboard" text
+        // Left side: "cm-dashboard" text with version
+        let title_text = format!(" cm-dashboard v{}", env!("CARGO_PKG_VERSION"));
        let left_span = Span::styled(
-            " cm-dashboard", 
+            &title_text, 
            Style::default().fg(Theme::background()).bg(background_color).add_modifier(Modifier::BOLD)
        );
        let left_title = Paragraph::new(Line::from(vec![left_span]))
@@ -693,35 +667,27 @@ impl TuiApp {
            return host_summary_metric.status;
        }

-        // Fallback to old aggregation logic with proper Pending handling
+        // Rewritten status aggregation - only Critical, Warning, or OK for top bar
        let mut has_critical = false;
        let mut has_warning = false;
-        let mut has_pending = false;
-        let mut ok_count = 0;

        for metric in &metrics {
            match metric.status {
                Status::Critical => has_critical = true,
                Status::Warning => has_warning = true,
-                Status::Pending => has_pending = true,
-                Status::Ok => ok_count += 1,
-                Status::Inactive => ok_count += 1, // Treat inactive as OK for aggregation
-                Status::Unknown => {}, // Ignore unknown for aggregation
-                Status::Offline => {}, // Ignore offline for aggregation
+                // Treat all other statuses as OK for top bar aggregation
+                Status::Ok | Status::Pending | Status::Inactive | Status::Unknown => {},
+                Status::Offline => {}, // Ignore offline
            }
        }

-        // Priority order: Critical > Warning > Pending > Ok > Unknown
+        // Only return Critical, Warning, or OK - no other statuses
        if has_critical {
            Status::Critical
        } else if has_warning {
            Status::Warning
-        } else if has_pending {
-            Status::Pending
-        } else if ok_count > 0 {
-            Status::Ok
        } else {
-            Status::Unknown
+            Status::Ok
        }
    }

@@ -745,9 +711,10 @@ impl TuiApp {
        shortcuts.push("Tab: Host".to_string());
        shortcuts.push("↑↓/jk: Select".to_string());
        shortcuts.push("r: Rebuild".to_string());
+        shortcuts.push("B: Backup".to_string());
        shortcuts.push("s/S: Start/Stop".to_string());
-        shortcuts.push("J: Logs".to_string());
-        shortcuts.push("L: Custom".to_string());
+        shortcuts.push("L: Logs".to_string());
+        shortcuts.push("t: Terminal".to_string());
        shortcuts.push("w: Wake".to_string());
        
        // Always show quit
--- a/dashboard/src/ui/widgets/backup.rs
+++ b/dashboard/src/ui/widgets/backup.rs
@@ -30,6 +30,8 @@ pub struct BackupWidget {
    backup_disk_product_name: Option<String>,
    /// Backup disk serial number from SMART data
    backup_disk_serial_number: Option<String>,
+    /// Backup disk wear percentage from SMART data
+    backup_disk_wear_percent: Option<f32>,
    /// Backup disk filesystem label
    backup_disk_filesystem_label: Option<String>,
    /// Number of completed services
@@ -65,6 +67,7 @@ impl BackupWidget {
            backup_disk_used_gb: None,
            backup_disk_product_name: None,
            backup_disk_serial_number: None,
+            backup_disk_wear_percent: None,
            backup_disk_filesystem_label: None,
            services_completed_count: None,
            services_failed_count: None,
@@ -197,6 +200,9 @@ impl Widget for BackupWidget {
                "backup_disk_serial_number" => {
                    self.backup_disk_serial_number = Some(metric.value.as_string());
                }
+                "backup_disk_wear_percent" => {
+                    self.backup_disk_wear_percent = metric.value.as_f32();
+                }
                "backup_disk_filesystem_label" => {
                    self.backup_disk_filesystem_label = Some(metric.value.as_string());
                }
@@ -328,21 +334,31 @@ impl BackupWidget {
            );
            lines.push(ratatui::text::Line::from(disk_spans));

-            // Serial number as sub-item
+            // Collect sub-items to determine tree structure
+            let mut sub_items = Vec::new();
+            
            if let Some(serial) = &self.backup_disk_serial_number {
-                lines.push(ratatui::text::Line::from(vec![
-                    ratatui::text::Span::styled("  ├─ ", Typography::tree()),
-                    ratatui::text::Span::styled(format!("S/N: {}", serial), Typography::secondary())
-                ]));
+                sub_items.push(format!("S/N: {}", serial));
            }
-
-            // Usage as sub-item
+            
+            if let Some(wear) = self.backup_disk_wear_percent {
+                sub_items.push(format!("Wear: {:.0}%", wear));
+            }
+            
            if let (Some(used), Some(total)) = (self.backup_disk_used_gb, self.backup_disk_total_gb) {
                let used_str = Self::format_size_with_proper_units(used);
                let total_str = Self::format_size_with_proper_units(total);
+                sub_items.push(format!("Usage: {}/{}", used_str, total_str));
+            }
+            
+            // Render sub-items with proper tree structure
+            let num_items = sub_items.len();
+            for (i, item) in sub_items.into_iter().enumerate() {
+                let is_last = i == num_items - 1;
+                let tree_char = if is_last { "  └─ " } else { "  ├─ " };
                lines.push(ratatui::text::Line::from(vec![
-                    ratatui::text::Span::styled("  └─ ", Typography::tree()),
-                    ratatui::text::Span::styled(format!("Usage: {}/{}", used_str, total_str), Typography::secondary())
+                    ratatui::text::Span::styled(tree_char, Typography::tree()),
+                    ratatui::text::Span::styled(item, Typography::secondary())
                ]));
            }
        }
--- a/dashboard/src/ui/widgets/services.rs
+++ b/dashboard/src/ui/widgets/services.rs
@@ -209,36 +209,13 @@ impl ServicesWidget {
    }

    /// Get currently selected service name (for actions)
+    /// Only returns parent service names since only parent services can be selected
    pub fn get_selected_service(&self) -> Option<String> {
-        // Build the same display list to find the selected service
-        let mut display_lines: Vec<(String, Status, bool, Option<(ServiceInfo, bool)>, String)> = Vec::new();
-        
+        // Only parent services can be selected, so just get the parent service at selected_index
        let mut parent_services: Vec<_> = self.parent_services.iter().collect();
        parent_services.sort_by(|(a, _), (b, _)| a.cmp(b));
-
-        for (parent_name, parent_info) in parent_services {
-            let parent_line = self.format_parent_service_line(parent_name, parent_info);
-            display_lines.push((parent_line, parent_info.widget_status, false, None, parent_name.clone()));
-            
-            if let Some(sub_list) = self.sub_services.get(parent_name) {
-                let mut sorted_subs = sub_list.clone();
-                sorted_subs.sort_by(|(a, _), (b, _)| a.cmp(b));
-                
-                for (i, (sub_name, sub_info)) in sorted_subs.iter().enumerate() {
-                    let is_last_sub = i == sorted_subs.len() - 1;
-                    let full_sub_name = format!("{}_{}", parent_name, sub_name);
-                    display_lines.push((
-                        sub_name.clone(),
-                        sub_info.widget_status,
-                        true,
-                        Some((sub_info.clone(), is_last_sub)),
-                        full_sub_name,
-                    ));
-                }
-            }
-        }
        
-        display_lines.get(self.selected_index).map(|(_, _, _, _, raw_name)| raw_name.clone())
+        parent_services.get(self.selected_index).map(|(name, _)| name.to_string())
    }

    /// Get total count of selectable services (parent services only, not sub-services)
--- a/dashboard/src/ui/widgets/system.rs
+++ b/dashboard/src/ui/widgets/system.rs
@@ -45,12 +45,15 @@ pub struct SystemWidget {
 struct StoragePool {
    name: String,
    mount_point: String,
-    pool_type: String, // "Single", "Raid0", etc.
+    pool_type: String, // "single", "mergerfs (2+1)", "RAID5 (3+1)", etc.
+    pool_health: Option<String>, // "healthy", "degraded", "critical", "rebuilding"
    drives: Vec<StorageDrive>,
+    filesystems: Vec<FileSystem>, // For physical drive pools: individual filesystem children
    usage_percent: Option<f32>,
    used_gb: Option<f32>,
    total_gb: Option<f32>,
    status: Status,
+    health_status: Status, // Separate status for pool health vs usage
 }

 #[derive(Clone)]
@@ -61,6 +64,16 @@ struct StorageDrive {
    status: Status,
 }

+#[derive(Clone)]
+struct FileSystem {
+    mount_point: String,
+    usage_percent: Option<f32>,
+    used_gb: Option<f32>,
+    total_gb: Option<f32>,
+    available_gb: Option<f32>,
+    status: Status,
+}
+
 impl SystemWidget {
    pub fn new() -> Self {
        Self {
@@ -144,39 +157,57 @@ impl SystemWidget {
        }
    }

-    /// Parse storage metrics into pools and drives
+    /// Parse storage metrics into pools and drives  
    fn update_storage_from_metrics(&mut self, metrics: &[&Metric]) {
        let mut pools: std::collections::HashMap<String, StoragePool> = std::collections::HashMap::new();
        
        for metric in metrics {
            if metric.name.starts_with("disk_") {
                if let Some(pool_name) = self.extract_pool_name(&metric.name) {
-                    let mount_point = self.get_mount_point_for_pool(&pool_name);
                    let pool = pools.entry(pool_name.clone()).or_insert_with(|| StoragePool {
                        name: pool_name.clone(),
-                        mount_point: mount_point.clone(),
-                        pool_type: "Single".to_string(), // Default, could be enhanced
+                        mount_point: self.get_mount_point_for_pool(&pool_name), // Default fallback
+                        pool_type: "single".to_string(), // Default, will be updated
+                        pool_health: None,
                        drives: Vec::new(),
+                        filesystems: Vec::new(),
                        usage_percent: None,
                        used_gb: None,
                        total_gb: None,
                        status: Status::Unknown,
+                        health_status: Status::Unknown,
                    });

                    // Parse different metric types
-                    if metric.name.contains("_usage_percent") {
+                    if metric.name.contains("_usage_percent") && !metric.name.contains("_fs_") {
+                        // Only use drive-level metrics for pool totals, not filesystem metrics
                        if let MetricValue::Float(usage) = metric.value {
                            pool.usage_percent = Some(usage);
                            pool.status = metric.status.clone();
                        }
-                    } else if metric.name.contains("_used_gb") {
+                    } else if metric.name.contains("_used_gb") && !metric.name.contains("_fs_") {
+                        // Only use drive-level metrics for pool totals, not filesystem metrics
                        if let MetricValue::Float(used) = metric.value {
                            pool.used_gb = Some(used);
                        }
-                    } else if metric.name.contains("_total_gb") {
+                    } else if metric.name.contains("_total_gb") && !metric.name.contains("_fs_") {
+                        // Only use drive-level metrics for pool totals, not filesystem metrics  
                        if let MetricValue::Float(total) = metric.value {
                            pool.total_gb = Some(total);
                        }
+                    } else if metric.name.contains("_mount_point") {
+                        if let MetricValue::String(mount_point) = &metric.value {
+                            pool.mount_point = mount_point.clone();
+                        }
+                    } else if metric.name.contains("_pool_type") {
+                        if let MetricValue::String(pool_type) = &metric.value {
+                            pool.pool_type = pool_type.clone();
+                        }
+                    } else if metric.name.contains("_pool_health") {
+                        if let MetricValue::String(health) = &metric.value {
+                            pool.pool_health = Some(health.clone());
+                            pool.health_status = metric.status.clone();
+                        }
                    } else if metric.name.contains("_temperature") {
                        if let Some(drive_name) = self.extract_drive_name(&metric.name) {
                            // Find existing drive or create new one
@@ -217,6 +248,91 @@ impl SystemWidget {
                                }
                            }
                        }
+                    } else if metric.name.contains("_fs_") {
+                        // Handle filesystem metrics for physical drive pools (disk_{pool}_fs_{fs_name}_{metric})
+                        if let (Some(fs_name), Some(metric_type)) = self.extract_filesystem_metric(&metric.name) {
+                            // Find or create filesystem entry
+                            let fs_exists = pool.filesystems.iter().any(|fs| {
+                                let fs_id = if fs.mount_point == "/" { 
+                                    "root".to_string() 
+                                } else { 
+                                    fs.mount_point.trim_start_matches('/').replace('/', "_") 
+                                };
+                                fs_id == fs_name
+                            });
+
+                            if !fs_exists {
+                                // Create filesystem entry with correct mount point
+                                let mount_point = if metric_type == "mount_point" {
+                                    if let MetricValue::String(mount) = &metric.value {
+                                        mount.clone()
+                                    } else {
+                                        // Fallback: handle special cases
+                                        if fs_name == "root" {
+                                            "/".to_string()
+                                        } else {
+                                            format!("/{}", fs_name.replace('_', "/"))
+                                        }
+                                    }
+                                } else {
+                                    // Fallback for non-mount_point metrics: generate mount point from fs_name
+                                    if fs_name == "root" {
+                                        "/".to_string()
+                                    } else {
+                                        format!("/{}", fs_name.replace('_', "/"))
+                                    }
+                                };
+
+                                pool.filesystems.push(FileSystem {
+                                    mount_point,
+                                    usage_percent: None,
+                                    used_gb: None,
+                                    total_gb: None,
+                                    available_gb: None,
+                                    status: Status::Unknown,
+                                });
+                            }
+
+                            // Update the filesystem with the metric value
+                            if let Some(filesystem) = pool.filesystems.iter_mut().find(|fs| {
+                                let fs_id = if fs.mount_point == "/" { 
+                                    "root".to_string() 
+                                } else { 
+                                    fs.mount_point.trim_start_matches('/').replace('/', "_") 
+                                };
+                                fs_id == fs_name
+                            }) {
+                                match metric_type.as_str() {
+                                    "usage_percent" => {
+                                        if let MetricValue::Float(usage) = metric.value {
+                                            filesystem.usage_percent = Some(usage);
+                                            filesystem.status = metric.status.clone();
+                                        }
+                                    }
+                                    "used_gb" => {
+                                        if let MetricValue::Float(used) = metric.value {
+                                            filesystem.used_gb = Some(used);
+                                        }
+                                    }
+                                    "total_gb" => {
+                                        if let MetricValue::Float(total) = metric.value {
+                                            filesystem.total_gb = Some(total);
+                                        }
+                                    }
+                                    "available_gb" => {
+                                        if let MetricValue::Float(available) = metric.value {
+                                            filesystem.available_gb = Some(available);
+                                        }
+                                    }
+                                    "mount_point" => {
+                                        if let MetricValue::String(mount) = &metric.value {
+                                            filesystem.mount_point = mount.clone();
+                                        }
+                                    }
+                                    _ => {}
+                                }
+                            }
+                        }
                    }
                }
            }
@@ -230,26 +346,52 @@ impl SystemWidget {

    /// Extract pool name from disk metric name
    fn extract_pool_name(&self, metric_name: &str) -> Option<String> {
-        // Pattern: disk_{pool_name}_{drive_name}_{metric_type}
+        // Pattern: disk_{pool_name}_{various suffixes}
        // Since pool_name can contain underscores, work backwards from known metric suffixes
        if metric_name.starts_with("disk_") {
-            // First try drive-specific metrics that have device names
-            if let Some(suffix_pos) = metric_name.rfind("_temperature")
-                .or_else(|| metric_name.rfind("_wear_percent"))
-                .or_else(|| metric_name.rfind("_health")) {
-                // Find the second-to-last underscore to get pool name
-                let before_suffix = &metric_name[..suffix_pos];
-                if let Some(drive_start) = before_suffix.rfind('_') {
-                    return Some(metric_name[5..drive_start].to_string()); // Skip "disk_"
+            // Handle filesystem metrics: disk_{pool}_fs_{filesystem}_{metric}
+            if metric_name.contains("_fs_") {
+                if let Some(fs_pos) = metric_name.find("_fs_") {
+                    return Some(metric_name[5..fs_pos].to_string()); // Skip "disk_", extract pool name before "_fs_"
                }
            }
-            // For pool-level metrics (usage_percent, used_gb, total_gb), take everything before the metric suffix
+            // Handle pool-level metrics (usage_percent, used_gb, total_gb, mount_point, pool_type, pool_health)
            else if let Some(suffix_pos) = metric_name.rfind("_usage_percent")
                .or_else(|| metric_name.rfind("_used_gb"))
-                .or_else(|| metric_name.rfind("_total_gb")) {
+                .or_else(|| metric_name.rfind("_total_gb"))
+                .or_else(|| metric_name.rfind("_available_gb"))
+                .or_else(|| metric_name.rfind("_mount_point"))
+                .or_else(|| metric_name.rfind("_pool_type"))
+                .or_else(|| metric_name.rfind("_pool_health")) {
                return Some(metric_name[5..suffix_pos].to_string()); // Skip "disk_"
            }
-            // Fallback to old behavior for unknown patterns
+            // Handle drive-specific metrics: disk_{pool}_{drive_role}_{metric} (for mergerfs) or disk_{pool}_{drive}_{metric} (for physical drives)
+            else if let Some(suffix_pos) = metric_name.rfind("_temperature")
+                .or_else(|| metric_name.rfind("_wear_percent"))
+                .or_else(|| metric_name.rfind("_health")) {
+                // For mergerfs pools, metrics look like: disk_srv_media_data_0_temperature or disk_srv_media_parity_0_temperature
+                // We need to extract just "srv_media" as the pool name
+                let before_suffix = &metric_name[..suffix_pos];
+                
+                // Check if this looks like a mergerfs drive metric (contains data_ or parity_)
+                if before_suffix.contains("_data_") {
+                    if let Some(data_pos) = before_suffix.find("_data_") {
+                        return Some(metric_name[5..data_pos].to_string()); // Extract pool name before "_data_"
+                    }
+                } else if before_suffix.contains("_parity_") {
+                    if let Some(parity_pos) = before_suffix.find("_parity_") {
+                        return Some(metric_name[5..parity_pos].to_string()); // Extract pool name before "_parity_"
+                    }
+                }
+                
+                // Fallback for physical drive metrics: find the second-to-last underscore
+                if let Some(drive_start) = before_suffix.rfind('_') {
+                    if drive_start > 5 {
+                        return Some(metric_name[5..drive_start].to_string()); // Skip "disk_"
+                    }
+                }
+            }
+            // Fallback: extract first component after disk_ prefix
            else if let Some(captures) = metric_name.strip_prefix("disk_") {
                if let Some(pos) = captures.find('_') {
                    return Some(captures[..pos].to_string());
@@ -259,16 +401,50 @@ impl SystemWidget {
        None
    }

+    /// Extract filesystem name and metric type from filesystem metric names
+    /// Pattern: disk_{pool}_fs_{filesystem_name}_{metric_type}
+    fn extract_filesystem_metric(&self, metric_name: &str) -> (Option<String>, Option<String>) {
+        if metric_name.starts_with("disk_") && metric_name.contains("_fs_") {
+            // Find the _fs_ part
+            if let Some(fs_start) = metric_name.find("_fs_") {
+                let after_fs = &metric_name[fs_start + 4..]; // Skip "_fs_"
+                
+                // Look for known metric suffixes (these can contain underscores)
+                let known_suffixes = ["usage_percent", "used_gb", "total_gb", "available_gb", "mount_point"];
+                
+                for suffix in known_suffixes {
+                    if after_fs.ends_with(suffix) {
+                        // Extract filesystem name by removing suffix and underscore
+                        if let Some(underscore_pos) = after_fs.rfind(&format!("_{}", suffix)) {
+                            let fs_name = after_fs[..underscore_pos].to_string();
+                            return (Some(fs_name), Some(suffix.to_string()));
+                        }
+                    }
+                }
+            }
+        }
+        (None, None)
+    }
+
    /// Extract drive name from disk metric name  
    fn extract_drive_name(&self, metric_name: &str) -> Option<String> {
        // Pattern: disk_{pool_name}_{drive_name}_{metric_type}
+        // For mergerfs: disk_{pool_name}_{data|parity}_{index}_{metric_type}
        // Since pool_name can contain underscores, work backwards from known metric suffixes
        if metric_name.starts_with("disk_") {
            if let Some(suffix_pos) = metric_name.rfind("_temperature")
                .or_else(|| metric_name.rfind("_wear_percent"))
                .or_else(|| metric_name.rfind("_health")) {
-                // Find the second-to-last underscore to get the drive name
                let before_suffix = &metric_name[..suffix_pos];
+                
+                // For mergerfs drive metrics: extract the role_index part (e.g., "data_0", "parity_1")
+                if before_suffix.contains("_data_") || before_suffix.contains("_parity_") {
+                    if let Some(role_start) = before_suffix.rfind("_data_").or_else(|| before_suffix.rfind("_parity_")) {
+                        return Some(before_suffix[role_start + 1..].to_string()); // e.g., "data_0" or "parity_1"
+                    }
+                }
+                
+                // Fallback for physical drive metrics: get the last component
                if let Some(drive_start) = before_suffix.rfind('_') {
                    return Some(before_suffix[drive_start + 1..].to_string());
                }
@@ -277,73 +453,208 @@ impl SystemWidget {
        None
    }

-    /// Render storage section with tree structure
+    /// Render storage section with enhanced tree structure
    fn render_storage(&self) -> Vec<Line<'_>> {
        let mut lines = Vec::new();

        for pool in &self.storage_pools {
-            // Pool header line
-            let usage_text = match (pool.usage_percent, pool.used_gb, pool.total_gb) {
-                (Some(pct), Some(used), Some(total)) => {
-                    format!("{:.0}% {:.1}GB/{:.1}GB", pct, used, total)
-                }
-                _ => "—% —GB/—GB".to_string(),
-            };
-            
-            let pool_label = if pool.pool_type.to_lowercase() == "single" {
+            // Pool header line with type and health
+            let pool_label = if pool.pool_type == "single" {
                format!("{}:", pool.mount_point)
            } else {
                format!("{} ({}):", pool.mount_point, pool.pool_type)
            };
            let pool_spans = StatusIcons::create_status_spans(
-                pool.status.clone(),
+                pool.health_status.clone(),
                &pool_label
            );
            lines.push(Line::from(pool_spans));

-            // Drive lines with tree structure
-            let has_usage_line = pool.usage_percent.is_some();
-            for (i, drive) in pool.drives.iter().enumerate() {
-                let is_last_drive = i == pool.drives.len() - 1;
-                let tree_symbol = if is_last_drive && !has_usage_line { "└─" } else { "├─" };
-                
-                let mut drive_info = Vec::new();
-                if let Some(temp) = drive.temperature {
-                    drive_info.push(format!("T: {:.0}C", temp));
+            // Pool health line (for multi-disk pools)
+            if pool.pool_type != "single" {
+                if let Some(health) = &pool.pool_health {
+                    let health_text = match health.as_str() {
+                        "healthy" => format!("Pool Status: {} Healthy", 
+                            if pool.drives.len() > 1 { format!("({} drives)", pool.drives.len()) } else { String::new() }),
+                        "degraded" => "Pool Status: ⚠ Degraded".to_string(),
+                        "critical" => "Pool Status: ✗ Critical".to_string(), 
+                        "rebuilding" => "Pool Status: ⟳ Rebuilding".to_string(),
+                        _ => format!("Pool Status: ? {}", health),
+                    };
+                    
+                    let mut health_spans = vec![
+                        Span::raw("  "),
+                        Span::styled("├─ ", Typography::tree()),
+                    ];
+                    health_spans.extend(StatusIcons::create_status_spans(pool.health_status.clone(), &health_text));
+                    lines.push(Line::from(health_spans));
                }
-                if let Some(wear) = drive.wear_percent {
-                    drive_info.push(format!("W: {:.0}%", wear));
-                }
-                let drive_text = if drive_info.is_empty() {
-                    drive.name.clone()
-                } else {
-                    format!("{} {}", drive.name, drive_info.join(" • "))
-                };
-
-                let mut drive_spans = vec![
-                    Span::raw("  "),
-                    Span::styled(tree_symbol, Typography::tree()),
-                    Span::raw(" "),
-                ];
-                drive_spans.extend(StatusIcons::create_status_spans(drive.status.clone(), &drive_text));
-                lines.push(Line::from(drive_spans));
            }

-            // Usage line
-            if pool.usage_percent.is_some() {
-                let tree_symbol = "└─";
-                let mut usage_spans = vec![
-                    Span::raw("  "),
-                    Span::styled(tree_symbol, Typography::tree()),
-                    Span::raw(" "),
-                ];
-                usage_spans.extend(StatusIcons::create_status_spans(pool.status.clone(), &usage_text));
-                lines.push(Line::from(usage_spans));
+            // Total usage line (always show for pools)
+            let usage_text = match (pool.usage_percent, pool.used_gb, pool.total_gb) {
+                (Some(pct), Some(used), Some(total)) => {
+                    format!("Total: {:.0}% {:.1}GB/{:.1}GB", pct, used, total)
+                }
+                _ => "Total: —% —GB/—GB".to_string(),
+            };
+            
+            let has_drives = !pool.drives.is_empty();
+            let has_filesystems = !pool.filesystems.is_empty();
+            let has_children = has_drives || has_filesystems;
+            let tree_symbol = if has_children { "├─" } else { "└─" };
+            let mut usage_spans = vec![
+                Span::raw("  "),
+                Span::styled(tree_symbol, Typography::tree()),
+                Span::raw(" "),
+            ];
+            usage_spans.extend(StatusIcons::create_status_spans(pool.status.clone(), &usage_text));
+            lines.push(Line::from(usage_spans));
+
+            // Drive lines with enhanced grouping
+            if pool.pool_type.contains("mergerfs") && pool.drives.len() > 1 {
+                // Group drives by type for mergerfs pools
+                let (data_drives, parity_drives): (Vec<_>, Vec<_>) = pool.drives.iter().enumerate()
+                    .partition(|(_, drive)| {
+                        // Simple heuristic: drives with 'parity' in name or sdc (common parity drive)
+                        !drive.name.to_lowercase().contains("parity") && drive.name != "sdc"
+                    });
+
+                // Show data drives
+                if !data_drives.is_empty() {
+                    lines.push(Line::from(vec![
+                        Span::raw("  "),
+                        Span::styled("├─ ", Typography::tree()),
+                        Span::styled("Data Disks:", Typography::secondary()),
+                    ]));
+                    
+                    for (i, (_, drive)) in data_drives.iter().enumerate() {
+                        let is_last = i == data_drives.len() - 1;
+                        if is_last && parity_drives.is_empty() {
+                            self.render_drive_line(&mut lines, drive, "│  └─");
+                        } else {
+                            self.render_drive_line(&mut lines, drive, "│  ├─");
+                        }
+                    }
+                }
+
+                // Show parity drives
+                if !parity_drives.is_empty() {
+                    lines.push(Line::from(vec![
+                        Span::raw("  "),
+                        Span::styled("└─ ", Typography::tree()),
+                        Span::styled("Parity:", Typography::secondary()),
+                    ]));
+                    
+                    for (i, (_, drive)) in parity_drives.iter().enumerate() {
+                        let is_last = i == parity_drives.len() - 1;
+                        if is_last {
+                            self.render_drive_line(&mut lines, drive, "   └─");
+                        } else {
+                            self.render_drive_line(&mut lines, drive, "   ├─");
+                        }
+                    }
+                }
+            } else if pool.pool_type != "single" && pool.drives.len() > 1 {
+                // Regular drive listing for non-mergerfs multi-drive pools
+                for (i, drive) in pool.drives.iter().enumerate() {
+                    let is_last = i == pool.drives.len() - 1;
+                    let tree_symbol = if is_last { "└─" } else { "├─" };
+                    self.render_drive_line(&mut lines, drive, tree_symbol);
+                }
+            } else if pool.pool_type.starts_with("drive (") {
+                // Physical drive pools: show drive info + filesystem children
+                // First show drive information
+                for drive in &pool.drives {
+                    let mut drive_info = Vec::new();
+                    if let Some(temp) = drive.temperature {
+                        drive_info.push(format!("T: {:.0}°C", temp));
+                    }
+                    if let Some(wear) = drive.wear_percent {
+                        drive_info.push(format!("W: {:.0}%", wear));
+                    }
+                    let drive_text = if drive_info.is_empty() {
+                        format!("Drive: {}", drive.name)
+                    } else {
+                        format!("Drive: {}", drive_info.join(" "))
+                    };
+
+                    let has_filesystems = !pool.filesystems.is_empty();
+                    let tree_symbol = if has_filesystems { "├─" } else { "└─" };
+                    let mut drive_spans = vec![
+                        Span::raw("  "),
+                        Span::styled(tree_symbol, Typography::tree()),
+                        Span::raw(" "),
+                    ];
+                    drive_spans.extend(StatusIcons::create_status_spans(drive.status.clone(), &drive_text));
+                    lines.push(Line::from(drive_spans));
+                }
+
+                // Then show filesystem children
+                for (i, filesystem) in pool.filesystems.iter().enumerate() {
+                    let is_last = i == pool.filesystems.len() - 1;
+                    let tree_symbol = if is_last { "└─" } else { "├─" };
+                    
+                    let fs_text = match (filesystem.usage_percent, filesystem.used_gb, filesystem.total_gb) {
+                        (Some(pct), Some(used), Some(total)) => {
+                            format!("{}: {:.0}% {:.1}GB/{:.1}GB", filesystem.mount_point, pct, used, total)
+                        }
+                        (Some(pct), _, Some(total)) => {
+                            format!("{}: {:.0}% —GB/{:.1}GB", filesystem.mount_point, pct, total)
+                        }
+                        (Some(pct), _, _) => {
+                            format!("{}: {:.0}% —GB/—GB", filesystem.mount_point, pct)
+                        }
+                        (_, Some(used), Some(total)) => {
+                            format!("{}: —% {:.1}GB/{:.1}GB", filesystem.mount_point, used, total)
+                        }
+                        _ => format!("{}: —% —GB/—GB", filesystem.mount_point),
+                    };
+
+                    let mut fs_spans = vec![
+                        Span::raw("  "),
+                        Span::styled(tree_symbol, Typography::tree()),
+                        Span::raw(" "),
+                    ];
+                    fs_spans.extend(StatusIcons::create_status_spans(filesystem.status.clone(), &fs_text));
+                    lines.push(Line::from(fs_spans));
+                }
+            } else {
+                // Single drive or simple pools
+                for (i, drive) in pool.drives.iter().enumerate() {
+                    let is_last = i == pool.drives.len() - 1;
+                    let tree_symbol = if is_last { "└─" } else { "├─" };
+                    self.render_drive_line(&mut lines, drive, tree_symbol);
+                }
            }
        }

        lines
    }
+
+    /// Helper to render a single drive line
+    fn render_drive_line<'a>(&self, lines: &mut Vec<Line<'a>>, drive: &StorageDrive, tree_symbol: &'a str) {
+        let mut drive_info = Vec::new();
+        if let Some(temp) = drive.temperature {
+            drive_info.push(format!("T: {:.0}°C", temp));
+        }
+        if let Some(wear) = drive.wear_percent {
+            drive_info.push(format!("W: {:.0}%", wear));
+        }
+        let drive_text = if drive_info.is_empty() {
+            drive.name.clone()
+        } else {
+            format!("{} {}", drive.name, drive_info.join(" • "))
+        };
+
+        let mut drive_spans = vec![
+            Span::raw("  "),
+            Span::styled(tree_symbol, Typography::tree()),
+            Span::raw(" "),
+        ];
+        drive_spans.extend(StatusIcons::create_status_spans(drive.status.clone(), &drive_text));
+        lines.push(Line::from(drive_spans));
+    }
 }

 impl Widget for SystemWidget {
@@ -513,48 +824,9 @@ impl SystemWidget {
            Span::styled("Storage:", Typography::widget_title())
        ]));
        
-        // Storage items with overflow handling
+        // Storage items - let main overflow logic handle truncation
        let storage_lines = self.render_storage();
-        let remaining_space = area.height.saturating_sub(lines.len() as u16);
-        
-        if storage_lines.len() <= remaining_space as usize {
-            // All storage lines fit
-            lines.extend(storage_lines);
-        } else if remaining_space >= 2 {
-            // Show what we can and add overflow indicator
-            let lines_to_show = (remaining_space - 1) as usize; // Reserve 1 line for overflow
-            lines.extend(storage_lines.iter().take(lines_to_show).cloned());
-            
-            // Count hidden pools
-            let mut hidden_pools = 0;
-            let mut current_pool = String::new();
-            for (i, line) in storage_lines.iter().enumerate() {
-                if i >= lines_to_show {
-                    // Check if this line represents a new pool (no indentation)
-                    if let Some(first_span) = line.spans.first() {
-                        let text = first_span.content.as_ref();
-                        if !text.starts_with("  ") && text.contains(':') {
-                            let pool_name = text.split(':').next().unwrap_or("").trim();
-                            if pool_name != current_pool {
-                                hidden_pools += 1;
-                                current_pool = pool_name.to_string();
-                            }
-                        }
-                    }
-                }
-            }
-            
-            if hidden_pools > 0 {
-                let overflow_text = format!(
-                    "... and {} more pool{}",
-                    hidden_pools,
-                    if hidden_pools == 1 { "" } else { "s" }
-                );
-                lines.push(Line::from(vec![
-                    Span::styled(overflow_text, Typography::muted())
-                ]));
-            }
-        }
+        lines.extend(storage_lines);

        // Apply scroll offset
        let total_lines = lines.len();
--- a/shared/Cargo.toml
+++ b/shared/Cargo.toml
@@ -1,6 +1,6 @@
 [package]
 name = "cm-dashboard-shared"
-version = "0.1.82"
+version = "0.1.123"
 edition = "2021"

 [dependencies]
--- a/shared/src/metrics.rs
+++ b/shared/src/metrics.rs
@@ -82,13 +82,13 @@ impl MetricValue {
 /// Health status for metrics
 #[derive(Debug, Clone, Copy, Serialize, Deserialize, PartialEq, Eq, PartialOrd, Ord)]
 pub enum Status {
-    Inactive, // Lowest priority - treated as good
-    Ok,       // Second lowest - also good
-    Unknown,
-    Offline,
-    Pending,
-    Warning,
-    Critical,
+    Inactive, // Lowest priority
+    Unknown,  // 
+    Offline,  // 
+    Pending,  // 
+    Ok,       // 5th place - good status has higher priority than unknown states
+    Warning,  // 
+    Critical, // Highest priority
 }

 impl Status {
Author	SHA1	Message	Date
Christoffer Martinsson	43fb838c9b	Fix duplicate drive display in mergerfs pools All checks were successful Build and Release / build-and-release (push) Successful in 2m9s Details - Restructure storage rendering logic to prevent drive duplication - Use specific mergerfs check instead of generic multi-drive condition - Ensure drives only appear once under organized data/parity sections	2025-11-23 17:46:09 +01:00
Christoffer Martinsson	54483653f9	Fix mergerfs drive metric parsing for proper pool consolidation All checks were successful Build and Release / build-and-release (push) Successful in 2m11s Details - Update extract_pool_name to handle data_/parity_ drive metrics correctly - Fix extract_drive_name to parse mergerfs drive roles properly - Prevent srv_media_data from being parsed as separate pool	2025-11-23 17:40:12 +01:00
Christoffer Martinsson	e47803b705	Fix mergerfs pool consolidation and naming All checks were successful Build and Release / build-and-release (push) Successful in 1m18s Details - Improve pool name extraction in dashboard parsing - Use consistent mergerfs pool naming in agent - Add mount_point metric parsing to use actual mount paths - Fix pool consolidation to prevent duplicate entries	2025-11-23 17:35:23 +01:00
Christoffer Martinsson	439d0d9af6	Fix mergerfs numeric reference parsing for proper pool detection All checks were successful Build and Release / build-and-release (push) Successful in 2m11s Details Add support for numeric mergerfs references like "1:2" by mapping them to actual mount points (/mnt/disk1, /mnt/disk2). This enables proper mergerfs pool detection and hides individual member drives as intended.	2025-11-23 17:27:45 +01:00
Christoffer Martinsson	2242b5ddfe	Make mergerfs detection more robust to prevent discovery failures All checks were successful Build and Release / build-and-release (push) Successful in 2m9s Details Skip mergerfs pools with numeric device references (e.g., "1:2") instead of crashing. This allows regular drive detection to work even when mergerfs uses non-standard mount formats. Preserves existing functionality for standard mergerfs setups.	2025-11-23 17:19:15 +01:00
Christoffer Martinsson	9d0f42d55c	Fix filesystem usage_percent parsing and remove hardcoded status All checks were successful Build and Release / build-and-release (push) Successful in 1m8s Details 1. Add missing _fs_ filter to usage_percent parsing in dashboard 2. Fix agent to use calculated fs_status instead of hardcoded Status::Ok This completes the disk collector auto-discovery by ensuring filesystem usage percentages and status indicators display correctly.	2025-11-23 16:47:20 +01:00
Christoffer Martinsson	1da7b5f6e7	Fix both pool-level and filesystem metric parsing bugs All checks were successful Build and Release / build-and-release (push) Successful in 1m10s Details 1. Prevent filesystem _fs_ metrics from overwriting pool totals 2. Fix filesystem name extraction to properly parse boot/root names This resolves both the pool total display (showing 0.1GB instead of 220GB) and individual filesystem display (showing —% —GB/—GB).	2025-11-23 16:29:00 +01:00
Christoffer Martinsson	006f27f7d9	Fix lsblk parsing for filesystem discovery All checks were successful Build and Release / build-and-release (push) Successful in 1m9s Details Remove unused debug code and fix device name parsing to properly handle lsblk tree characters. This resolves the issue where only /boot filesystem was discovered instead of both /boot and /.	2025-11-23 16:09:48 +01:00
Christoffer Martinsson	07422cd0a7	Add debug logging for filesystem discovery All checks were successful Build and Release / build-and-release (push) Successful in 1m18s Details	2025-11-23 15:26:49 +01:00
Christoffer Martinsson	de30b80219	Fix filesystem metric parsing bounds error in dashboard All checks were successful Build and Release / build-and-release (push) Successful in 1m8s Details Prevent string slicing panic in extract_filesystem_metric when parsing individual filesystem metrics. This resolves the issue where filesystem entries show —% —GB/—GB instead of actual usage.	2025-11-23 15:23:15 +01:00
Christoffer Martinsson	7d96ca9fad	Fix disk collector filesystem discovery with debug logging All checks were successful Build and Release / build-and-release (push) Successful in 1m9s Details Add debug logging to filesystem usage collection to identify why some mount points are being dropped during discovery. This should resolve the issue where total capacity shows incorrect values.	2025-11-23 15:15:56 +01:00
Christoffer Martinsson	9b940ebd19	Fix string slicing bounds error in metric parsing All checks were successful Build and Release / build-and-release (push) Successful in 1m8s Details Fixed critical bug where dashboard crashed with 'begin <= end' slice error when parsing disk metrics with new naming format. Added bounds checking to prevent invalid string slicing operations. - Fixed extract_pool_name string slicing bounds check - Removed ineffective panic handling that caused infinite loop - Dashboard now handles new disk collector metrics correctly	2025-11-23 14:52:09 +01:00
Christoffer Martinsson	6d4da1b7da	Add robust error handling to prevent dashboard crashes All checks were successful Build and Release / build-and-release (push) Successful in 2m9s Details Added comprehensive error handling to storage metrics parsing to prevent dashboard crashes when encountering unexpected metric formats or parsing errors. Dashboard now continues gracefully with empty storage display instead of crashing, improving reliability during metric format changes. - Wrapped storage metric parsing in panic recovery - Added logging for metric parsing failures - Dashboard shows empty storage on errors instead of crashing - Ensures dashboard remains functional during agent updates	2025-11-23 14:45:00 +01:00
Christoffer Martinsson	1e7f1616aa	Complete disk collector rewrite with clean architecture All checks were successful Build and Release / build-and-release (push) Successful in 2m8s Details Replaced complex disk collector with simple lsblk → df → group workflow. Supports both physical drives and mergerfs pools with unified metrics. Eliminates configuration complexity through pure auto-discovery. - Clean discovery pipeline using lsblk and df commands - Physical drive grouping with filesystem children - MergerFS pool detection with parity heuristics - Unified metric generation for consistent dashboard display - SMART data collection for temperature, wear, and health	2025-11-23 14:22:19 +01:00
Christoffer Martinsson	7a3ee3d5ba	Fix physical drive grouping logic for unified pool visualization All checks were successful Build and Release / build-and-release (push) Successful in 2m11s Details Updated filesystem grouping to use extract_base_device method for proper partition-to-drive mapping. This ensures nvme0n1p1 and nvme0n1p2 are correctly grouped under nvme0n1 drive pool instead of separate pools.	2025-11-23 13:54:33 +01:00
Christoffer Martinsson	0e8b149718	Add partial filesystem data display for debugging All checks were successful Build and Release / build-and-release (push) Successful in 2m11s Details - Make filesystem display more forgiving - show partial data if available - Will display usage% even if GB values are missing, or vice versa - This should help identify which specific metrics aren't being populated - Debug version to identify filesystem data population issues	2025-11-23 13:33:36 +01:00
Christoffer Martinsson	2c27d0e1db	Prepare v0.1.107 for filesystem data debugging All checks were successful Build and Release / build-and-release (push) Successful in 1m31s Details Current status: Filesystem children appear with correct mount points but show —% —GB/—GB Need to debug why usage_percent, used_gb, total_gb metrics aren't populating filesystem entries	2025-11-23 13:24:13 +01:00
Christoffer Martinsson	9f18488752	Fix filesystem metric parsing for correct mount point names All checks were successful Build and Release / build-and-release (push) Successful in 2m10s Details - Fix extract_filesystem_metric() to handle multi-underscore metric names correctly - Parse known metric suffixes (usage_percent, mount_point, available_gb, etc.) - Prevent incorrect parsing like boot_mount_point -> fs_name='boot_mount', metric_type='point' - Should now correctly show /boot and / instead of /boot/mount and /root/mount	2025-11-23 13:11:05 +01:00
Christoffer Martinsson	fab6404cca	Fix filesystem children creation logic All checks were successful Build and Release / build-and-release (push) Successful in 1m17s Details - Allow filesystem entries to be created with any metric, not just mount_point - Ensure filesystem children appear under physical drive pools - Improve mount point fallback logic for better compatibility	2025-11-23 13:04:01 +01:00
Christoffer Martinsson	c3626cc362	Fix unified pool visualization filesystem children display issues All checks were successful Build and Release / build-and-release (push) Successful in 2m14s Details - Fix extract_pool_name() to handle filesystem metrics (_fs_) correctly - Prevent individual filesystem pools (nvme0n1_fs_boot, nvme0n1_fs_root) from being created - Fix incorrect mount point names (was showing /root/mount instead of /) - Only create filesystem entries when receiving mount_point metrics - Add available_gb field to FileSystem struct for proper available space handling - Ensure filesystem children show correct usage data instead of —% —GB/—GB	2025-11-23 12:58:16 +01:00
Christoffer Martinsson	d68ecfbc64	Complete unified pool visualization with filesystem children All checks were successful Build and Release / build-and-release (push) Successful in 2m17s Details - Implement filesystem children display under physical drive pools - Agent generates individual filesystem metrics for each mount point - Dashboard parses filesystem metrics and displays as tree children - Add filesystem usage, total, and available space metrics - Support target format: drive info + filesystem children hierarchy - Fix compilation warnings by properly using available_bytes calculation	2025-11-23 12:48:24 +01:00
Christoffer Martinsson	d1272a6c13	Implement unified pool visualization for single drives All checks were successful Build and Release / build-and-release (push) Successful in 1m19s Details - Group single disk filesystems by physical drive during auto-discovery - Create physical drive pools with filesystem children - Display temperature, wear, and health at drive level - Provide consistent hierarchical storage visualization - Fix borrow checker issues in create_physical_drive_pool method - Add PhysicalDrive case to all StoragePoolType match statements	2025-11-23 12:10:42 +01:00
Christoffer Martinsson	33b3beb342	Implement storage auto-discovery system All checks were successful Build and Release / build-and-release (push) Successful in 1m49s Details - Add automatic detection of mergerfs pools by parsing /proc/mounts - Implement smart heuristics for parity disk identification - Store discovered topology at agent startup for efficient monitoring - Eliminate need for manual storage pool configuration - Support zero-config storage visualization with backward compatibility - Clean up mount parsing and remove unused fields	2025-11-23 11:44:57 +01:00
Christoffer Martinsson	f9384d9df6	Implement enhanced storage pool visualization All checks were successful Build and Release / build-and-release (push) Successful in 2m34s Details - Add support for mergerfs pool grouping with data and parity disk separation - Implement pool health monitoring (healthy/degraded/critical status) - Create hierarchical tree view for multi-disk storage arrays - Add automatic pool type detection and member disk association - Maintain backward compatibility for single disk configurations - Support future extension for RAID and ZFS pool types	2025-11-23 11:18:21 +01:00
Christoffer Martinsson	156d707377	Add version display and fix status aggregation priorities All checks were successful Build and Release / build-and-release (push) Successful in 2m37s Details - Add dynamic version display in top bar using CARGO_PKG_VERSION - Rewrite status aggregation to only show Critical/Warning/OK in top bar - Fix Status enum ordering to prioritize OK over transitional states - Remove blue/gray colors from top bar background	2025-11-21 16:19:45 +01:00
Christoffer Martinsson	dc1a2e3a0f	Add disk wear monitoring and fix storage overflow display All checks were successful Build and Release / build-and-release (push) Successful in 1m15s Details - Add disk wear percentage collection from SMART data in backup script - Add backup_disk_wear_percent metric to backup collector with thresholds - Display wear percentage in backup widget disk section - Fix storage section overflow handling to use consistent "X more below" logic - Update maintenance mode to return pending status instead of unknown	2025-11-20 20:36:45 +01:00
Christoffer Martinsson	5d6b8e6253	Treat pending status as OK for title bar color aggregation All checks were successful Build and Release / build-and-release (push) Successful in 1m12s Details Apply same logic used for inactive status to pending status. Pending services now contribute to OK count instead of being ignored, preventing blue title bar during service transitions.	2025-11-20 18:09:59 +01:00
Christoffer Martinsson	0cba083305	Remove pending status from title bar color aggregation All checks were successful Build and Release / build-and-release (push) Successful in 2m9s Details Title bar now only shows Critical (red), Warning (yellow), and OK (green) colors. Pending status is ignored in color calculation to prevent blue title bar during service transitions.	2025-11-20 14:19:29 +01:00
Christoffer Martinsson	a6be7a4788	Consolidate log viewing to use service-manage logs action All checks were successful Build and Release / build-and-release (push) Successful in 1m31s Details Replace separate service_logs_cmd with service-manage logs action to unify service management through single script interface. Dashboard now calls 'service-manage logs <service>' which provides intelligent log viewing based on service state and configuration.	2025-11-20 11:30:55 +01:00
Christoffer Martinsson	2384f7f9b9	Unify log viewing with configurable script command All checks were successful Build and Release / build-and-release (push) Successful in 2m37s Details Replace separate J/L keys with single L key that calls configurable service_logs_cmd from dashboard config. Script handles both journalctl and custom log files automatically based on service configuration. Update status bar to show all available keybindings including previously missing backup and terminal commands.	2025-11-20 11:00:38 +01:00
Christoffer Martinsson	cd5ef65d3d	Fix service selection for services with sub-services All checks were successful Build and Release / build-and-release (push) Successful in 2m35s Details - Fix get_selected_service to always return parent service names - Prevent selection of container sub-items when managing docker services - Ensure service commands operate on correct systemd service names - Simplify service selection logic to only consider parent services - Update version to 0.1.92	2025-11-19 18:01:10 +01:00
Christoffer Martinsson	7bf9ca6201	Fix SSH command quoting and remove duplicate user prompts All checks were successful Build and Release / build-and-release (push) Successful in 2m8s Details - Fix rebuild and backup commands with proper inner command quoting - Remove duplicate "Press any key to close..." from SSH commands since scripts handle it - Clean up SSH terminal command to avoid redundant prompts - Ensure consistent command execution patterns across all SSH operations - Update version to 0.1.91	2025-11-19 16:08:03 +01:00
Christoffer Martinsson	f587b42797	Implement unified SSH command management with dedicated scripts All checks were successful Build and Release / build-and-release (push) Successful in 1m11s Details - Replace complex SSH command patterns with simple script calls - Create service-manage script for start/stop operations with proper logging - Create rebuild script equivalent to rebuild_git alias with user feedback - Update dashboard to use unified command pattern: sudo service-manage, sudo rebuild - Simplify backup to use service management: service-manage start borgbackup - Configure sudoers with wildcards for Nix store path compatibility - Remove cmtec references from script names for better genericity - Update version to 0.1.90	2025-11-19 15:37:33 +01:00
Christoffer Martinsson	7ae464e172	Wrap service commands in bash -c to ensure session persistence All checks were successful Build and Release / build-and-release (push) Successful in 1m10s Details - Use bash -c to properly execute service start/stop command sequences - Ensure SSH session stays alive for user input prompt - Fix escaping issues with nested quotes in commands - Update version to 0.1.89	2025-11-19 13:32:04 +01:00
Christoffer Martinsson	980c9a20a2	Fix service start/stop popup auto-close issue All checks were successful Build and Release / build-and-release (push) Successful in 1m12s Details - Move 'Press any key to close...' prompt inside SSH session - Ensure tmux popup stays open until user manually closes - Maintain consistent behavior with other SSH commands - Update version to 0.1.88	2025-11-19 13:21:48 +01:00
Christoffer Martinsson	448a38dede	Fix service management command issues All checks were successful Build and Release / build-and-release (push) Successful in 2m7s Details - Add sudo to pkill commands to resolve permission errors when killing journalctl processes - Fix service stop command timing to show logs during shutdown process - Add sleep delays to ensure log visibility before cleanup - Update version to 0.1.87	2025-11-19 13:13:15 +01:00
Christoffer Martinsson	f12e20b0f3	Standardize SSH command patterns with consistent user feedback All checks were successful Build and Release / build-and-release (push) Successful in 2m10s Details - Apply uniform pattern to all SSH commands: informational text + command + exit prompt - Remove exit prompt from logging commands (J/L keys) that run continuously with -f flag - Simplify rebuild and backup commands to match service command pattern - Update version to 0.1.86	2025-11-19 12:57:18 +01:00
Christoffer Martinsson	564d1f37e7	Streamline service commands with auto-close functionality All checks were successful Build and Release / build-and-release (push) Successful in 2m8s Details - Remove header text from start/stop commands for cleaner output - Add automatic log termination when service reaches target state - Start command auto-closes when service becomes active - Stop command auto-closes when service becomes inactive - Simplify SSH command structure by removing bash -c wrapper - Version bump to 0.1.85	2025-11-19 12:30:36 +01:00
Christoffer Martinsson	65bfb9f617	Add real-time logging to service stop command All checks were successful Build and Release / build-and-release (push) Successful in 2m9s Details - Update stop command to use background systemctl with immediate log following - Use same approach as start command for consistent real-time log viewing - Version bump to 0.1.84	2025-11-19 11:59:18 +01:00
Christoffer Martinsson	4f4ef6259b	Fix service start log command escaping All checks were successful Build and Release / build-and-release (push) Successful in 2m6s Details - Change --since="1 second ago" to --since='1 second ago' - Fixes shell escaping issue preventing real-time logs - Version bump to 0.1.83	2025-11-19 11:49:08 +01:00