Root cause: SMART data was collected sequentially, one drive at a time.
With 5 drives taking ~500ms each, total collection time was 2.5+ seconds.
When disk collector runs every 1 second, this caused overlapping
collections creating resource contention. The last drive (sda/Data_3)
would timeout due to the drive being accessed by the previous collection.
Solution: Query all drives in parallel using futures::join_all. Now all
drives get their SMART data collected simultaneously with independent
3-second timeouts, eliminating contention and reducing total collection
time from 2.5+ seconds to ~500ms (the slowest single drive).
Benefits:
- All drives complete in ~500ms instead of 2.5+ seconds
- No overlapping collections causing resource contention
- Each drive gets full 3-second timeout window
- sda/Data_3 should now show temperature and serial number
Bump version to v0.1.223
Root cause: run_command_with_timeout() was calling cmd.spawn() without
configuring stdout/stderr pipes. This caused command output to go to
journald instead of being captured by wait_with_output(). The disk
collector received empty output and failed silently.
Solution: Configure stdout(Stdio::piped()) and stderr(Stdio::piped())
before spawning commands. This ensures wait_with_output() can properly
capture command output.
Fixes: Empty Storage section, lsblk output appearing in journald
Bump version to v0.1.222
v0.1.220 broke disk collector by changing the import from
std::process::Command to tokio::process::Command, but lines 193 and
767 explicitly used std::process::Command::new() which silently failed.
Solution: Import both as aliases (TokioCommand/StdCommand) and use
appropriate type for each operation - async commands use TokioCommand
with run_command_with_timeout, sync commands use StdCommand with
system timeout wrapper.
Fixes: Empty Storage section after v0.1.220 deployment
Bump version to v0.1.221
- Changed disk collector to use tokio::process::Command instead of std::process::Command
- Updated run_command_with_timeout to properly kill processes on timeout
- Fixes issue where smartctl hangs on problematic drives (/dev/sda) freezing entire agent
- Timeout now force-kills hung processes using kill -9, preventing orphaned smartctl processes
This resolves the issue where Data_3 showed unknown status because smartctl was hanging
indefinitely trying to read from a problematic drive, blocking the entire collector.
Bump version to v0.1.220
Co-Authored-By: Claude <noreply@anthropic.com>
- Sort repositories alphabetically before rendering
- Sort backup disks by serial number
- Prevents display jumping between different orderings on updates
- Consistent display order across refreshes
Bump version to v0.1.214
Co-Authored-By: Claude <noreply@anthropic.com>
- Agent now extracts "C" + digits pattern (C3, C10) using char parsing
- Removes suffixes like "_ACPI", "_MWAIT" at source
- Reduces JSON payload size over ZMQ
- No regex dependency - uses fast char iteration (~1μs overhead)
- Robust fallback to original name if pattern not found
- Dashboard simplified to use clean names directly
Bump version to v0.1.212
Co-Authored-By: Claude <noreply@anthropic.com>
- Strip suffixes like "_ACPI" from C-state names
- Display changes from "C3_ACPI:51%" to "C3:51%"
- Cleaner, more concise presentation
Bump version to v0.1.211
Co-Authored-By: Claude <noreply@anthropic.com>
- Changed code to use zmq.transmission_interval_seconds instead of top-level collection_interval_seconds
- Removed collection_interval_seconds from AgentConfig
- Updated validation to check zmq.transmission_interval_seconds
- Improves config organization by grouping all ZMQ settings together
Bump version to v0.1.210
Co-Authored-By: Claude <noreply@anthropic.com>
- Changed CpuData.cstate from String to Vec<CStateInfo>
- Added CStateInfo struct with name and percent fields
- Collector calculates percentage for each C-state based on accumulated time
- Sorts and returns top 3 C-states by usage
- Dashboard displays: "C10:79% C8:10% C6:8%"
Provides better visibility into CPU idle state distribution.
Bump version to v0.1.209
Co-Authored-By: Claude <noreply@anthropic.com>
- Changed CpuData.frequency_mhz to CpuData.cstate (String)
- Implemented collect_cstate() to read CPU idle depth from sysfs
- Finds deepest C-state with most accumulated time (C0-C10)
- Updated dashboard to display C-state instead of frequency
- More accurate indicator of CPU activity vs power management
Bump version to v0.1.208
Co-Authored-By: Claude <noreply@anthropic.com>
Agent changes:
- Changed docker ps and docker images commands to run without sudo
- cm-agent user is already in docker group, so sudo is not needed
- Fixes "unable to change to root gid: Operation not permitted" error
- Systemd security restrictions were blocking sudo gid changes
This fixes Docker container and image collection on systems with
systemd security hardening enabled.
Updated to version 0.1.178
Agent changes:
- Log stderr output when docker images command fails
- This will show the actual error message (e.g., permission denied, docker not found)
- Helps diagnose why docker images collection is failing
Updated to version 0.1.177
Agent changes:
- Changed debug!() to info!() for Docker collection logs
- This allows logs to show with default RUST_LOG=info setting
- Added info import to tracing use statement
Now logs will be visible in journalctl without needing to change log level:
- "Collecting Docker sub-services for service: docker"
- "Found X Docker containers"
- "Found X Docker images"
- "Total Docker sub-services added: X"
Updated to version 0.1.176
Agent changes:
- Added debug logging to Docker images collection function
- Log when Docker sub-services are being collected for a service
- Log count of containers and images found
- Log total sub-services added
- Show command failure details instead of silently returning empty vec
This will help diagnose why Docker images aren't showing up as sub-services
on some hosts. The logs will show if the docker commands are failing or if
the collection is working but data isn't being transmitted properly.
Updated to version 0.1.175
Agent changes:
- Added get_docker_images() function to list all Docker images
- Use docker images to show stored images with repository:tag and size
- Display images as sub-services under docker service with size in parentheses
- Skip dangling images (<none>:<none>)
- Images shown with active status (always present when listed)
Example display:
● docker active 139M 1MB
├─ ● docker_gitea active
├─ ○ docker_old-app inactive
├─ ● image_nginx:latest (142MB)
├─ ● image_postgres:15 (379MB)
└─ ● image_gitea:latest (256MB)
Updated to version 0.1.174
Agent changes:
- Use docker ps -a to show ALL containers (running and stopped)
- Map container status: Up -> active, Exited/Created -> inactive, other -> failed
- Display Docker containers as sub-services under the docker service
- Each container shown with proper status indicator
Example display:
● docker active 139M 1MB
├─ ● docker_gitea active
├─ ○ docker_old-app inactive
└─ ● docker_immich active
Updated to version 0.1.173
Agent changes:
- Changed docker ps to docker ps -a to show ALL containers (running and stopped)
- Map container status: Up -> active, Exited/Created -> inactive, other -> failed
- Display Docker containers as individual top-level services instead of sub-services
- Each container shown as "docker_{container_name}" in service list
This provides better visibility of all containers and their status directly in the
services panel, making it easier to see stopped containers at a glance.
Updated to version 0.1.172
Dashboard changes:
- Sort child interfaces under physical NICs with VLANs first (by VLAN ID ascending)
- Non-VLAN virtual interfaces sorted alphabetically by name
- Applied same sorting to both nested children and standalone virtual interfaces
Example output order:
- wan (vlan 5)
- lan (vlan 30)
- isolan (vlan 32)
- seclan (vlan 35)
- br-48df2d79b46f
- docker0
- tailscale0
Updated to version 0.1.171
Agent changes:
- Parse /proc/net/vlan/config to extract VLAN IDs for interfaces
- Detect primary physical interface via default route
- Auto-assign primary interface as parent for virtual interfaces without explicit parent
- Added vlan_id field to NetworkInterfaceData
Dashboard changes:
- Display VLAN ID in format "interface (vlan X): IP"
- Show VLAN IDs for both nested and standalone virtual interfaces
This ensures virtual interfaces (docker0, tailscale0, etc.) are properly nested
under the primary physical NIC, and VLAN interfaces show their IDs.
Updated to version 0.1.170
Agent changes:
- Filter out ifb* interfaces from network display
- Parse @parent notation for VLAN interfaces (e.g., lan@enp0s31f6)
- Show physical interfaces even without IP addresses
- Only filter virtual interfaces that have no IPs
- Extract parent interface relationships for proper nesting
Dashboard changes:
- Nest VLAN/child interfaces under their physical parent
- Show physical NICs with status icons even when down
- Display child interfaces grouped under parent interface
- Keep standalone virtual interfaces at root level
Updated to version 0.1.169
Reordered display sections in system widget:
- Network section now appears after RAM and tmpfs mounts
- Improves logical grouping by placing network info between memory and storage
- Updated to version 0.1.168
Nest IP addresses under physical interface names. Show physical interfaces with status icon on header line. Virtual interfaces show inline with compressed IPs.
Format:
● eno1:
├─ ip: 192.168.30.105
└─ tailscale0: 100.125.108.16
Version bump to 0.1.166
Move network collection from NixOS collector to dedicated NetworkCollector. Add link status detection for physical interfaces (up/down). Group interfaces by physical/virtual, show status icons for physical NICs only. Down interfaces show as Inactive instead of Critical.
Version bump to 0.1.165
