- Fix extract_filesystem_metric() to handle multi-underscore metric names correctly
- Parse known metric suffixes (usage_percent, mount_point, available_gb, etc.)
- Prevent incorrect parsing like boot_mount_point -> fs_name='boot_mount', metric_type='point'
- Should now correctly show /boot and / instead of /boot/mount and /root/mount
- Allow filesystem entries to be created with any metric, not just mount_point
- Ensure filesystem children appear under physical drive pools
- Improve mount point fallback logic for better compatibility
- Fix extract_pool_name() to handle filesystem metrics (_fs_) correctly
- Prevent individual filesystem pools (nvme0n1_fs_boot, nvme0n1_fs_root) from being created
- Fix incorrect mount point names (was showing /root/mount instead of /)
- Only create filesystem entries when receiving mount_point metrics
- Add available_gb field to FileSystem struct for proper available space handling
- Ensure filesystem children show correct usage data instead of —% —GB/—GB
- Implement filesystem children display under physical drive pools
- Agent generates individual filesystem metrics for each mount point
- Dashboard parses filesystem metrics and displays as tree children
- Add filesystem usage, total, and available space metrics
- Support target format: drive info + filesystem children hierarchy
- Fix compilation warnings by properly using available_bytes calculation
- Group single disk filesystems by physical drive during auto-discovery
- Create physical drive pools with filesystem children
- Display temperature, wear, and health at drive level
- Provide consistent hierarchical storage visualization
- Fix borrow checker issues in create_physical_drive_pool method
- Add PhysicalDrive case to all StoragePoolType match statements
- Add automatic detection of mergerfs pools by parsing /proc/mounts
- Implement smart heuristics for parity disk identification
- Store discovered topology at agent startup for efficient monitoring
- Eliminate need for manual storage pool configuration
- Support zero-config storage visualization with backward compatibility
- Clean up mount parsing and remove unused fields
- Add support for mergerfs pool grouping with data and parity disk separation
- Implement pool health monitoring (healthy/degraded/critical status)
- Create hierarchical tree view for multi-disk storage arrays
- Add automatic pool type detection and member disk association
- Maintain backward compatibility for single disk configurations
- Support future extension for RAID and ZFS pool types
- Add dynamic version display in top bar using CARGO_PKG_VERSION
- Rewrite status aggregation to only show Critical/Warning/OK in top bar
- Fix Status enum ordering to prioritize OK over transitional states
- Remove blue/gray colors from top bar background
- Add disk wear percentage collection from SMART data in backup script
- Add backup_disk_wear_percent metric to backup collector with thresholds
- Display wear percentage in backup widget disk section
- Fix storage section overflow handling to use consistent "X more below" logic
- Update maintenance mode to return pending status instead of unknown
Apply same logic used for inactive status to pending status.
Pending services now contribute to OK count instead of being
ignored, preventing blue title bar during service transitions.
Title bar now only shows Critical (red), Warning (yellow), and OK (green)
colors. Pending status is ignored in color calculation to prevent blue
title bar during service transitions.
Replace separate service_logs_cmd with service-manage logs action
to unify service management through single script interface.
Dashboard now calls 'service-manage logs <service>' which provides
intelligent log viewing based on service state and configuration.
Replace separate J/L keys with single L key that calls configurable
service_logs_cmd from dashboard config. Script handles both journalctl
and custom log files automatically based on service configuration.
Update status bar to show all available keybindings including
previously missing backup and terminal commands.
- Fix get_selected_service to always return parent service names
- Prevent selection of container sub-items when managing docker services
- Ensure service commands operate on correct systemd service names
- Simplify service selection logic to only consider parent services
- Update version to 0.1.92
- Fix rebuild and backup commands with proper inner command quoting
- Remove duplicate "Press any key to close..." from SSH commands since scripts handle it
- Clean up SSH terminal command to avoid redundant prompts
- Ensure consistent command execution patterns across all SSH operations
- Update version to 0.1.91
- Replace complex SSH command patterns with simple script calls
- Create service-manage script for start/stop operations with proper logging
- Create rebuild script equivalent to rebuild_git alias with user feedback
- Update dashboard to use unified command pattern: sudo service-manage, sudo rebuild
- Simplify backup to use service management: service-manage start borgbackup
- Configure sudoers with wildcards for Nix store path compatibility
- Remove cmtec references from script names for better genericity
- Update version to 0.1.90
- Use bash -c to properly execute service start/stop command sequences
- Ensure SSH session stays alive for user input prompt
- Fix escaping issues with nested quotes in commands
- Update version to 0.1.89
- Move 'Press any key to close...' prompt inside SSH session
- Ensure tmux popup stays open until user manually closes
- Maintain consistent behavior with other SSH commands
- Update version to 0.1.88
- Add sudo to pkill commands to resolve permission errors when killing journalctl processes
- Fix service stop command timing to show logs during shutdown process
- Add sleep delays to ensure log visibility before cleanup
- Update version to 0.1.87
- Apply uniform pattern to all SSH commands: informational text + command + exit prompt
- Remove exit prompt from logging commands (J/L keys) that run continuously with -f flag
- Simplify rebuild and backup commands to match service command pattern
- Update version to 0.1.86
- Remove header text from start/stop commands for cleaner output
- Add automatic log termination when service reaches target state
- Start command auto-closes when service becomes active
- Stop command auto-closes when service becomes inactive
- Simplify SSH command structure by removing bash -c wrapper
- Version bump to 0.1.85
- Update stop command to use background systemctl with immediate log following
- Use same approach as start command for consistent real-time log viewing
- Version bump to 0.1.84
- Update service start to use background systemctl start with immediate log following
- Implement `sudo systemctl start service & sudo journalctl -fu service --since="1 second ago"`
- Remove buffering issues that prevented real-time log streaming
- Version bump to 0.1.82
- Remove complex background process monitoring that was buffering output
- Use direct journalctl -fu command for immediate real-time log streaming
- Eliminate monitoring loop that was killing log stream when service became active
- User now controls log following duration with Ctrl+C
- Fixes buffering issues that prevented seeing ark server startup logs in real-time
- Remove scroll offset fields from HostWidgets struct
- Replace scrolling with simple "X more below" indicators in all widgets
- Remove user-stopped service tracking from agent (now uses SSH control)
- Inactive services now consistently show Status::Inactive with empty circles
- Simplify widget render methods by removing scroll parameters
- Clean up unused imports and legacy scrolling infrastructure
- Fix journalctl command to use -fu for proper log following
- Move Status::Inactive to lowest priority in enum (before Ok)
- Status aggregation now prefers Ok over Inactive in mixed scenarios
- Title bar stays green when mixing active and inactive services
- Inactive services still show gray icons but don't affect overall status
- Ensures healthy systems with stopped services maintain green status
- Reorder Status enum variants to fix aggregation priority
- Status::Inactive now has same priority as Status::Ok in aggregation
- Prevents inactive services from causing gray title bar
- Title bar stays green when system has only active and inactive services
- Only Unknown/Offline/Pending/Warning/Critical statuses affect title color
- Add new Status::Inactive variant to enum for better service state representation
- Agent now assigns Status::Inactive instead of Status::Warning for inactive services
- Dashboard displays inactive services with empty circle (○) icon in gray color
- User-stopped services still show as Status::Ok with green filled circle
- Inactive services treated as OK for host status aggregation
- Improves visual clarity between active (●), inactive (○), and warning (◐) states
- Service start now follows logs in real-time until service becomes active
- Automatically stops log following when systemctl reports service as active
- Eliminates need for manual Ctrl+C to exit log stream
- Shows final service status after startup completes
- Background monitoring loop checks service state every second
- Remove all transitional icon infrastructure (CommandType, pending transitions)
- Clean up ZMQ command system remnants after SSH migration
- Add real-time log streaming for service start operations
- Show final logs and status for service stop operations
- Fix compilation warnings by removing unused methods
- Simplify UI architecture with pure SSH-based service control
Replace ZMQ-based service start/stop commands with SSH execution in tmux
popups. This provides better user feedback with real-time systemctl output
while eliminating blocking operations from the main message processing loop.
Changes:
- Service start/stop now use SSH with progress display
- Added backup functionality with 'B' key
- Preserved transitional icons (↑/↓) for immediate visual feedback
- Removed all ZMQ service control commands and handlers
- Updated configuration to include backup_alias setting
- All operations (rebuild, backup, services) now use consistent SSH interface
This ensures stable heartbeat processing while providing superior user
experience with live command output and service status feedback.
Eliminates automatic CollectNow command sending on host connection which
was blocking the main message processing loop for up to 5 seconds per
command. Since agents transmit cached data every 2 seconds anyway, the
CollectNow optimization provided minimal benefit while causing heartbeat
detection issues. Also removes unused send_command wrapper method.
This should completely resolve intermittent host connection dropping.
Eliminates test_tcp_connectivity function that was causing 5-10 second
startup delays. ZMQ connections are non-blocking and we rely entirely
on heartbeat mechanism for connectivity detection. This restores fast
dashboard startup time.
Simplifies host connection configuration by removing tailscale_ip field,
connection_type preferences, and fallback retry logic. Now uses only the
ip field or hostname as fallback. Eliminates blocking TCP connectivity
tests that interfered with heartbeat processing.
This resolves intermittent host lost/found issues by removing the
connection retry timeouts that blocked the ZMQ message processing loop.
Update the auto connection type logic to try local network connections
before falling back to Tailscale. This provides better performance by
using faster local connections when available while maintaining Tailscale
as a reliable fallback.
Changes:
- Auto connection priority: local → tailscale → hostname (was tailscale → local)
- Fallback retry order updated to match new priority
- Supports omitting IP field in config for hosts without static local IP
Display the connection IP address that the dashboard is configured to use
for each host below the Agent version information. Shows which network
path (local/Tailscale) is being used for connections based on host
configuration.
Features:
- Display detected IP below Agent row in system widget
- Uses existing host configuration connection logic
- Shows actual IP being used for dashboard connections
Implement configurable network routing for both local and Tailscale networks.
Dashboard now supports intelligent connection selection with automatic fallback
between network types. Add IP configuration fields and connection routing logic
for ZMQ and SSH operations.
Features:
- Host configuration with local and Tailscale IP addresses
- Configurable connection types (local/tailscale/auto)
- Automatic fallback between network connections
- Updated ZMQ connection logic with retry support
- SSH command routing through configured IP addresses
Implement maintenance_mode_file configuration option in NotificationConfig
to allow customizable file paths for suppressing email notifications.
Updates maintenance mode check to use configured path instead of hardcoded
/tmp/cm-maintenance file.
- Press 't' to open SSH session to current host in tmux split
- Uses 30% vertical split consistent with logs and rebuild commands
- Auto-closes tmux window when SSH session ends
- Provides direct host administration access from dashboard
- Uses same SSH configuration as rebuild operations
Version 0.1.65
- Hide all system/backup/service panels when host is offline
- Show centered wake-up message with host status
- Display "Press 'w' to wake up host" if MAC address configured
- Provide clear visual indication when hosts are unreachable
- Improve user experience by removing confusing empty panels
Version 0.1.64
- Add dedicated heartbeat transmission every 5 seconds independent of metric collection
- Fix host offline detection by clearing metrics for disconnected hosts
- Move exclude_email_metrics to NotificationConfig for better organization
- Add cleanup_offline_hosts method to remove stale metrics after heartbeat timeout
- Ensure offline hosts show proper status icons and visual indicators
Version 0.1.63
- Add independent heartbeat checking timer (1 second interval) separate from metric reception
- Move get_connected_hosts() call outside metric receive condition to run periodically
- Remove duplicate update_hosts() call from metric processing to avoid redundancy
- Ensure offline host detection works even when no new metrics are received
- Fix issue where hosts going offline were never detected due to conditional heartbeat check
- Heartbeat timeouts now properly detected within configured timeout + 1 second
- Bump version to 0.1.62
- Change receive_metrics() from blocking to DONTWAIT to prevent main loop freezing
- Eliminate 1-second ZMQ socket timeout that was blocking UI after Tab key press
- Main loop now continues immediately after immediate render instead of waiting
- Maintain heartbeat-based host detection while fixing visual responsiveness
- Fix blocking operation introduced when implementing heartbeat timeout mechanism
- Tab navigation now truly immediate without any network operation delays
- Bump version to 0.1.61
- Add cached localhost field to TuiApp struct to avoid repeated gethostname() system calls
- Initialize localhost once in constructor instead of calling gethostname() on every navigation
- Replace gethostname() calls in update_hosts() and navigate_host() with cached value
- Eliminate expensive system call bottleneck causing Tab key responsiveness issues
- Reduce Tab navigation from 2+ system calls to zero system calls (memory access only)
- Fix performance regression introduced by immediate UI refresh implementation
- Bump version to 0.1.60
- Add immediate terminal.draw() call after input handling in main loop
- Eliminate delay between Tab key press and visual host switching
- Provide instant visual feedback for all navigation inputs
- Maintain existing metric update render cycle without duplication
- Fix UI update timing issue where changes only appeared on metric intervals
- Bump version to 0.1.59
- Replace 6 separate filter operations with single-pass metric categorization in update_metrics
- Reduce CPU overhead from 6x to 1x work per metric update cycle
- Fix Tab key sluggishness caused by competing expensive filtering operations
- Maintain exact same functionality with significantly better performance
- Improve UI responsiveness for host switching and navigation
- Bump version to 0.1.58
- Add agent_heartbeat metric to agent transmission for reliable host detection
- Update dashboard to track heartbeat timestamps per host instead of general metrics
- Add configurable heartbeat_timeout_seconds to dashboard ZMQ config (default 10s)
- Remove unused timeout_ms from agent config and revert to non-blocking command reception
- Remove unused heartbeat_interval_ms from agent configuration
- Host disconnect detection now uses dedicated heartbeat metrics for improved reliability
- Bump version to 0.1.57
- Add exclude_email_metrics field to AgentConfig for filtering email notifications
- Metrics matching excluded names skip notification processing but still appear in dashboard
- Optional field with serde(default) for backward compatibility
- Bump version to 0.1.56
