CRITICAL FIX: The previous cached collector architecture still had ZMQ sending
in the main event loop, where it could block waiting for RwLock when collectors
were writing. This caused the 3-8 second delays you observed.
Changes:
- Move ZMQ publisher to dedicated std::thread (ZMQ sockets aren't thread-safe)
- Use try_read() instead of read() to avoid blocking on write locks
- Send previous data if cache is locked by collector
- ZMQ now sends every 2s regardless of collector timing
- Remove publisher from ZmqHandler (now only handles commands)
Architecture:
- Collectors: Independent tokio tasks updating shared cache
- ZMQ Sender: Dedicated OS thread with its own publisher socket
- Main Loop: Only handles commands and notifications
This ensures ZMQ transmission is NEVER blocked by slow collectors.
Bump version to v0.1.195
Major architectural refactor to eliminate false "host offline" alerts:
- Replace sequential blocking collectors with independent async tasks
- Each collector runs at configurable interval and updates shared cache
- ZMQ sender reads cache every 1-2s regardless of collector speed
- Collector intervals: CPU/Memory (1-10s), Backup/NixOS (30-60s), Disk/Systemd (60-300s)
All intervals now configurable via NixOS config:
- collectors.*.interval_seconds (collection frequency per collector)
- collectors.*.command_timeout_seconds (timeout for shell commands)
- notifications.check_interval_seconds (status change detection rate)
Command timeouts increased from hardcoded 2-3s to configurable 10-30s:
- Disk collector: 30s (SMART operations, lsblk)
- Systemd collector: 15s (systemctl, docker, du commands)
- Network collector: 10s (ip route, ip addr)
Benefits:
- No false "offline" alerts when slow collectors take >10s
- Different update rates for different metric types
- Better resource management with longer timeouts
- Full NixOS configuration control
Bump version to v0.1.193
Emoji rendering in terminals can be very slow, especially when rendered in the hot path (every frame for every docker image). The whale emoji 🐋 was causing significant rendering delays.
Temporary change to ASCII 'D' to test if emoji was the performance issue.
Docker images now display with distinctive 🐋 whale icon in blue (highlight color) instead of status icons. This provides clear visual identification that these are docker images while not implying operational status.
Agent changes:
- Changed docker ps and docker images commands to run without sudo
- cm-agent user is already in docker group, so sudo is not needed
- Fixes "unable to change to root gid: Operation not permitted" error
- Systemd security restrictions were blocking sudo gid changes
This fixes Docker container and image collection on systems with
systemd security hardening enabled.
Updated to version 0.1.178
Agent changes:
- Log stderr output when docker images command fails
- This will show the actual error message (e.g., permission denied, docker not found)
- Helps diagnose why docker images collection is failing
Updated to version 0.1.177
Agent changes:
- Changed debug!() to info!() for Docker collection logs
- This allows logs to show with default RUST_LOG=info setting
- Added info import to tracing use statement
Now logs will be visible in journalctl without needing to change log level:
- "Collecting Docker sub-services for service: docker"
- "Found X Docker containers"
- "Found X Docker images"
- "Total Docker sub-services added: X"
Updated to version 0.1.176
Agent changes:
- Added debug logging to Docker images collection function
- Log when Docker sub-services are being collected for a service
- Log count of containers and images found
- Log total sub-services added
- Show command failure details instead of silently returning empty vec
This will help diagnose why Docker images aren't showing up as sub-services
on some hosts. The logs will show if the docker commands are failing or if
the collection is working but data isn't being transmitted properly.
Updated to version 0.1.175
Agent changes:
- Added get_docker_images() function to list all Docker images
- Use docker images to show stored images with repository:tag and size
- Display images as sub-services under docker service with size in parentheses
- Skip dangling images (<none>:<none>)
- Images shown with active status (always present when listed)
Example display:
● docker active 139M 1MB
├─ ● docker_gitea active
├─ ○ docker_old-app inactive
├─ ● image_nginx:latest (142MB)
├─ ● image_postgres:15 (379MB)
└─ ● image_gitea:latest (256MB)
Updated to version 0.1.174
Agent changes:
- Use docker ps -a to show ALL containers (running and stopped)
- Map container status: Up -> active, Exited/Created -> inactive, other -> failed
- Display Docker containers as sub-services under the docker service
- Each container shown with proper status indicator
Example display:
● docker active 139M 1MB
├─ ● docker_gitea active
├─ ○ docker_old-app inactive
└─ ● docker_immich active
Updated to version 0.1.173
Agent changes:
- Changed docker ps to docker ps -a to show ALL containers (running and stopped)
- Map container status: Up -> active, Exited/Created -> inactive, other -> failed
- Display Docker containers as individual top-level services instead of sub-services
- Each container shown as "docker_{container_name}" in service list
This provides better visibility of all containers and their status directly in the
services panel, making it easier to see stopped containers at a glance.
Updated to version 0.1.172
Dashboard changes:
- Sort child interfaces under physical NICs with VLANs first (by VLAN ID ascending)
- Non-VLAN virtual interfaces sorted alphabetically by name
- Applied same sorting to both nested children and standalone virtual interfaces
Example output order:
- wan (vlan 5)
- lan (vlan 30)
- isolan (vlan 32)
- seclan (vlan 35)
- br-48df2d79b46f
- docker0
- tailscale0
Updated to version 0.1.171
Agent changes:
- Parse /proc/net/vlan/config to extract VLAN IDs for interfaces
- Detect primary physical interface via default route
- Auto-assign primary interface as parent for virtual interfaces without explicit parent
- Added vlan_id field to NetworkInterfaceData
Dashboard changes:
- Display VLAN ID in format "interface (vlan X): IP"
- Show VLAN IDs for both nested and standalone virtual interfaces
This ensures virtual interfaces (docker0, tailscale0, etc.) are properly nested
under the primary physical NIC, and VLAN interfaces show their IDs.
Updated to version 0.1.170
Agent changes:
- Filter out ifb* interfaces from network display
- Parse @parent notation for VLAN interfaces (e.g., lan@enp0s31f6)
- Show physical interfaces even without IP addresses
- Only filter virtual interfaces that have no IPs
- Extract parent interface relationships for proper nesting
Dashboard changes:
- Nest VLAN/child interfaces under their physical parent
- Show physical NICs with status icons even when down
- Display child interfaces grouped under parent interface
- Keep standalone virtual interfaces at root level
Updated to version 0.1.169
Reordered display sections in system widget:
- Network section now appears after RAM and tmpfs mounts
- Improves logical grouping by placing network info between memory and storage
- Updated to version 0.1.168
Nest IP addresses under physical interface names. Show physical interfaces with status icon on header line. Virtual interfaces show inline with compressed IPs.
Format:
● eno1:
├─ ip: 192.168.30.105
└─ tailscale0: 100.125.108.16
Version bump to 0.1.166
Move network collection from NixOS collector to dedicated NetworkCollector. Add link status detection for physical interfaces (up/down). Group interfaces by physical/virtual, show status icons for physical NICs only. Down interfaces show as Inactive instead of Critical.
Version bump to 0.1.165
Network interfaces now display without status icons since there's no meaningful status to show. Just shows interface name and IP addresses with subnet compression.
Version bump to 0.1.164
Compress IPv4 addresses from same subnet to save space. Shows first IP in full (192.168.30.1) and subsequent IPs in same subnet with only last octet (100, 142).
Version bump to 0.1.163
Extend NixOS collector to gather network interfaces using ip command JSON output. Display all interfaces with IPv4 and IPv6 addresses in Network section above CPU metrics. Filters out loopback and link-local addresses.
Version bump to 0.1.161
Update systemd collector to use sudo for docker ps command to resolve
permission issues when cm-agent user lacks docker group membership.
This ensures Docker containers are properly discovered and displayed
as sub-services under the docker service.
Version: 0.1.160
- Support Temperature_Case attribute for Intel SSDs
- Support Media_Wearout_Indicator attribute for wear percentage
- Parse wear value from column 3 (VALUE) for Media_Wearout_Indicator
- Fixes temperature and wear display for Intel PHLA847000FL512DGN drives
- Fix physical drive serial number display in dashboard
- Improve pool health calculation for arrays with multiple disks
- Support proper tree symbols for multiple parity drives
- Read git commit hash from /var/lib/cm-dashboard/git-commit for Build display
- Fix NVMe serial number parsing to handle whitespace variations
- Move mount point to MergerFS header, remove drive count
- Restructure data drives to same level as parity with Data_1, Data_2 labels
- Remove "Total:" label from pool usage line
- Update parity to use closing tree symbol as last item
- Add serial_number field to DriveData structure
- Collect serial numbers from SMART data for all drives
- Display truncated serial numbers (last 8 chars) in dashboard
- Fix parity drive label to show status icon before "Parity:"
- Fix mount point label styling to match other labels
Updates disk collector and dashboard to show drive serial numbers
instead of device names (sdX) for MergerFS data/parity drives.
Agent extracts serial numbers from SMART data and dashboard
displays them when available, falling back to device names.
Updated the dashboard system widget to properly display MergerFS storage
pools in the exact format described in CLAUDE.md:
- Pool header showing "mergerfs (2+1):" format
- Total usage line: "├─ Total: ● 63% 2355.2GB/3686.4GB"
- Data Disks section with tree structure
- Individual drive entries: "│ ├─ ● sdb T: 24°C W: 5%"
- Parity drives section: "├─ Parity: ● sdc T: 24°C W: 5%"
- Mount point footer: "└─ Mount: /srv/media"
The dashboard now processes both data_drives and parity_drives arrays from
the agent data correctly and renders the complete MergerFS pool hierarchy
with proper status indicators, temperatures, and wear levels.
Storage display now matches the enhanced tree structure format specified
in documentation with correct Unicode tree characters and spacing.
Updated the disk collector to include all missing functionality from the
previous string-based implementation while working with the new structured
JSON data architecture:
- MergerFS pool discovery from /proc/mounts parsing
- SnapRAID parity drive detection via mount path heuristics
- Drive categorization (data vs parity) based on path analysis
- Numeric mergerfs reference resolution (1:2 -> /mnt/disk paths)
- Pool health calculation based on member drive SMART status
- Complete SMART data integration for temperatures and wear levels
- Proper exclusion of pool member drives from physical drive grouping
The implementation replicates the exact logic from the old code while
adapting to structured AgentData output format. All mergerfs and snapraid
monitoring capabilities are fully restored.
